Medžio tekinimo staklės / tekinimo staklės

Teknatool COMET DR 2 inkl. Untergestell

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Wire diameter: 0.1 – 1.3 mm Cut length: 5 – 70 mm Performance: up to 400 cycles/min Complete with cooling unit and motorized wire spool Dsdpfx Abj Syv To Seul

Sąlyga: labai geros būklės (naudotas),

Sąlyga: geras (naudotas), Boring bits, twist drills, drill bits -Manufacturer: Maysso / Ilix, twist drills, 4 pieces, diameters Ø 24 - 26.5 mm -Type: Two-flute, shank MK3 -Size: 1 each of Ø 24 / 25.5 / 26 / 26.5 mm -Price/offer: sold as a complete set -On request: various sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg Dujdperqinqofx Ab Sol

Sąlyga: naudotas, galia: 55 kW (74,78 AG), kuro tipas: dyzelinas, kuro bako talpa: 140 l, kėlimo aukštis: 17 550 mm, Gamybos metai: 2023, veikimo valandos: 2 310 h, Įranga: oro kondicionavimas, Pagaminimo metai: 2023 Tuščias svoris: 6 850 kg Naudingoji apkrova: 4 000 kg Dodpsw Afp Nefx Ab Ssul Leidžiama bendroji masė: 10 850 kg Matmenys (I x P x A): 627 x 242 x 250 cm

Sąlyga: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Duedpfxsu Ix D Ao Ab Ssl Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 16,92 kW (23,00 AG), kuro tipas: benzinas, pavaros tipas: hidrostatinis, Gamybos metai: 2024, veikimo valandos: 75 h, Agria 5900 Taifun Professional Hydrostatic Implement Carrier Technical Specifications: - Kawasaki 2-cylinder, four-stroke petrol engine with 23 HP and electric start - Transmission: infinitely variable hydrostatic drive with single-plate dry clutch - Speeds: Forward: 0–7 km/h, Reverse: 0–3.6 km/h - Handlebar: rubber-mounted, height and side adjustable without tools - Steering: power steering (active handlebar-steering system) - Tyres: 23 x 8.50 - 12 agricultural tread - Standard equipment: tyres, service and parking brake, hour meter, manual start, electric starter, power socket - Fuel: unleaded petrol - Weight: approx. 221.00 kg Special Features: - Intuitive steering with minimal effort thanks to active handlebar-steering system - Patented easy-control panel for intuitive operation - Powerful professional engines ensure sufficient output for all attachments - Portal axle for shifting the centre of gravity depending on location and attachment - Excellent visibility even in poor lighting conditions due to LED safety lighting - Standard support leg for comfortable parking without attachments - Hydraulic safety valve for secure positioning even on steep slopes - Optimised air intake reduces suction of dirt and dust - Central parking brake - Infinitely variable hydrostatic drive for optimal adjustment of working speed - Robust, low-maintenance design for continuous operation under the toughest conditions - Hour meter as standard - Agria quick-attach flange for a positive, secure connection between base unit and attachment - Powerful engines ensure fast operation with professional attachments - Easy to maneuver even without engine running thanks to wheel release Possible Attachments: - Green area maintenance: mowing, mulching, baling, and band raking - Soil cultivation: reverse tillers, harrows - Property and path maintenance: weed removal, snow clearing, snow blowers, grit spreading, sweeping - Woody plant maintenance: brushwood choppers This Agria 5900 Cyclone Hydro implement carrier is from model year 2024, has approximately 75 operating hours, and has only been used as a demonstration machine so far. The Cyclone is in excellent, as-new overall condition, with minimal signs of use, and is immediately ready for work. Sale is as a used machine, with return, warranty, and guarantee excluded. Net price: €18,479 // Gross price: €21,990 - Viewing and test drive welcome - Nationwide shipping by freight carrier for €180! - Financing and leasing available on request! Dsdpsv Ecdkjfx Ab Soul

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002,

Sąlyga: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Dsdpfx Abefv Awao Sjul Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and reduced air consumption

Sąlyga: naudotas, Gamybos metai: 2002, veikimo valandos: 37 000 h, mašinos/transporto priemonės numeris: 1651, rankos pasiekiamumas: 15 200 mm, keliamoji galia: 1 900 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Dedpov Hwk Uofx Ab Seul Grab: included Crane position: behind the cab Cab position: center !! Sale on behalf of a customer !!

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, plotis centre: 390 mm, centro aukštis: 310 mm, bendras svoris: 61 kg, įėjimo įtampa: 230 V, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 3 500 aps./min, veleno tvirtinimas: MK 2, galia: 0,75 kW (1,02 AG), • Solid cast iron construction of headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast iron tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Tool rest edge made of hardened steel. • 24-position indexing for locking the workpiece. • Convenient storage tray keeps centers within easy reach. • Knock-out bar and chuck key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Easy accessory installation: stand, extension, lighting, and mobile base. • Bed width: 160 mm! The medium-sized LAGUNA 1216 wood lathe stands out especially due to its robust components: cast iron headstock, tailstock, precision-ground bed, and tool rest with durable, hardened steel edge. Another highlight: ergonomic control panel made of anodized aluminum with Duraluminum speed control. Working speeds: 50–525, 325–1750, 650–3500 RPM. Infinitely variable speed control with Duraluminum dial and switching between three gear ratios using a simple lever mechanism. The motor technology guarantees high torque even at low speeds. Tailstock lock lever at the rear: does not interfere with operation yet remains easily accessible. Ergonomic handles with eccentric locking for a secure hold. Dujdpfx Abjtuuv Nj Sjl • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed ranges: 50–525, 325–1750, 650–3500 RPM • Max. turning diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest shank size: 25.4 mm (1") • L × W × H: 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Weight incl. packaging: 61 kg • Packaging dimensions: 920 × 380 × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Brass-tipped knockout bar • Spindle lock key