Termomechaninis analizatorius

TA Instruments TMA Q400

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Gtodpfeiryyajx Ab Ssw Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Machines for the production of medical masks type IIR, FFP2. Price per unit. Gjdpfsr Iydysx Ab Sotw

Būklė: naujas, *Technical Standard Specification: Device Type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data based on 80°C supply temperature, 15°C cooling water temperature, and a minimum pressure differential of 2 bar between cooling water inlet and outlet) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling with cooling water - Level monitoring by magnetic float switch - Dirt filter in return line and cooling water inlet - Changeover function for leak stop operation (usable up to system shut-off temperature) - Ball valve in supply and return line - Automatic system shut-off dependent on temperature - Fill time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: interface cable - Control and regulation unit SBCmini, with relay for collective alarm, 230V, terminal at rear of controller - Heating control SSR - Control panel IP54 - Interface 20mA TTY; Arburg pin configuration - 16A Cekon plug - Corrosion-resistant components (stainless steel, brass) Godpfjfnvwqsx Ab Sstw - Unit mounted on castors, two of which are swivel type with brake - Additional temperature safety device for safe heating shutdown on auxiliary relay - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max): 27 l/min Delivery pressure (max): 4.5 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weight/Colors: Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding fittings) Weight: approx. 43 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: G1/2" female thread Cooling water: G3/8" female thread *This device is compliant with European directives. Other directives and standards are only considered fulfilled if confirmed in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard are specified in offers and order confirmations.

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Prieinamas Nabertherm cirkuliacinis kamerų krosnis. Prisijungimo galia: 30 kW, maksimali temperatūra: 650°C, tūris: 500 l, įkaitimo laikas: apie 60 min, vidiniai išmatavimai X/Y/Z: 750 mm/1000 mm/750 mm. Įrenginio išmatavimai: apie 1300 mm/1900 mm/1850 mm, svoris: apie 750 kg. Dokumentacija yra. Galima apžiūra vietoje. Gsdpfoxrf Iusx Ab Sjtw

Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), An original, unused Tanabe rotary kiln in its original packaging, complete with all necessary accessories, is available. 1) Rotary kiln: Length: 17m, Height: 2400mm (+400mm/600mm extension), Width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating power: 200kW, max. temperature: 500°C-550°C (up to 900°C possible with retort replacement and heating upgrade), feed: screw feeder, rotary drum speed control: 0.5-2 rpm, weight: approx. 23,500kg, including separate combustion air preheater. 2) Rotary cooler: Length: 10,600mm, Height: 1600mm (+400mm/600mm extension), Width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with circulation, speed control: 1.1-4.3 rpm, discharge: rotary valve, weight: approx. 8,200kg. 3) Exhaust air filter, including exhaust fan, HEPA filter, and dust collection bin with a temperature tolerance of 250°C. Control: Siemens plant control system for local operation, 3x HMIs, several operator panels and control cabinets. Includes various accessories such as spare parts, transport aids, and associated smaller devices. The entire plant is brand new and still in its original packaging. The photos were taken at the manufacturing site. Documentation is available. An on-site inspection is possible. Gtjdjulkumepfx Ab Ssw

Būklė: labai geros būklės (naudotas), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: "Touch Panel" All control and operating commands can be executed by simply touching the functional icons on the "Touch Panel" control unit. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: Right (R1): nominal width 125 mm Left (L1): nominal width 85 mm Gtodpfxsv Sr Hzj Ab Ssw Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.H. Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% r.H. Operating Data: Test chamber lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse (on-site): 16 A slow-blow Refrigerants: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional verification and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Modifications and errors in technical data are subject to change!) We will be happy to answer further questions by phone.

Būklė: naudotas, Micro balance, laboratory balance, precision balance, analytical balance, scale, micro balance METTLER TOLEDO Model XS3DU Serial No.: 1129453969 Article No.: 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, statistics, formulation, density, percentage weighing, piece counting Maximum capacity: 3.1 g Readability: 0.01 mg Tare range (from ... to): 0 … 3.1 g Maximum capacity fine range: 800 mg Readability in fine range: 0.001 mg Repeatability (at nominal load): 6 µg (3 g) Repeatability in fine range (at nominal load): 0.8 µg (0.2 g) Linearity deviation: 10 µg (0.5 g) Corner load deviation (test load): 4 µg (1 g) Sensitivity deviation (test weight): 45 µg (3 g) Sensitivity temperature drift: 0.0001 %/°C Sensitivity stability: 0.0001 %/a Gedewrtbxepfx Ab Setw Repeatability (at low load): 3 µg (0.2 g) Repeatability, fine range (at low load): 0.2 g (0.5 µg) Linearity deviation: 3 µg (3 g) Corner load deviation (test load): 1.2 µg Sensitivity deviation (test weight): 9 µg (3 g) Minimum sample weight (according to USP): 6 mg Minimum sample weight (according to USP) in fine range: 1 mg Minimum sample weight (U = 1 %, k = 2): 0.6 mg Minimum sample weight (U = 1 %, k = 2) in fine range: 0.1 mg Stabilization time: 6 s Stabilization time in fine range: 10 s Interface update rate: 23 1/s Draft shield diameter: 68 mm Draft shield usable height: 55 mm Pan diameter: 25 mm - LCD touchscreen - RS232C interface - Printer type RS-P42 - Tare function Power adapter: Primary: 100 - 240 V AC, 50/60 Hz; Secondary: 12 V DC, 2.5 A Terminal/Display unit dimensions (L x W x H): 285 x 195 x 80 mm Weighing cell dimensions (L x W x H): 288 x 128 x 114 mm Printer dimensions (L x W x H): 210 x 150 x 90 mm Total weight: approx. 7 kg Good condition

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Olympus IX70-S8F Invertiertes Fluoreszenz-Phasenkontrastmikroskop. Dieses Olympus IX70 Mikroskop ermöglicht Phasenkontrast, DIC (Differential Interference Contrast) sowie Fluoreszenz. Es ist mit einem ergonomischen, neigbaren Binokularkopf und 10x Okularen ausgestattet. Das Mikroskop verfügt über einen Front- und Seiten-Phototubus für den Anschluss einer Kamera. Der 0,5 N.A. Kondensor ist mit DP10- und DP20-DIC-Prismen sowie Ph1- und PhC-Phasenringen versehen und enthält den IX-LWPO Polarisator. Der Fluoreszenz-Revolver mit 5 Positionen ist mit WIBA- und NU-Fluoreszenzfiltern bestückt. Ebenfalls enthalten sind der IX-AN Analysator und das U-DICT-DIC-Prisma. Im Mikroskop ist ein integrierter 1,0x / 1,5x Vergrößerungswechsler verbaut. Das Gerät befindet sich in gutem Zustand. Bitte beachten Sie auch unsere weiteren Angebote. Gtodpfouax T Sjx Ab Sew

Būklė: naudotas, Turbomolecular Pump Godpfx Ajdcpbkjb Setw Manufacturer: Pfeiffer Model: TPU 2000S Condition: Used Serial No.: PMP01141/9007 A 12-month warranty is available.

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), A complete Hosokawa mill for the processing of polyester resin lumps is available. System overview: Input material: Polyester resin, maximum input material size (dry): 800mm/600mm/20mm-30mm, Fineness: below 1.5mm, round hole diameter: 15mm, system capacity: approx. 3,000kg/h, analysis method: Alpine air jet sieve 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2,030mm/1,440mm, feed hopper volume: 2.5m³, working width: 1,500mm, cutter circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions (L/W/H): approx. 2,100mm/2,200mm/2,300mm, weight: approx. 3,500kg. 2) Automatic de-dusting filter AE 48 L, filter area: 42m², filter bags: needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. screen hole size: 3mm, required power: 55kW. Including extraction system, conveyor system, and accessories/peripheral equipment. Documentation available. On-site inspection possible. Gtodpfx Aevdu N Ajb Sjw