Spaudos presas HMG-ES

SXKH HMG-400ES-3020

Gamybos metai: 1999, Sąlyga: geras (naudotas), Tartomány a szöghosszban: 50–90 mm Gijdpfxedmbp Uo Abdol Sebesség: 100 szög/másodperc (frekvenciaszabályzóval) Vezérlés: Siemens S5 PLC

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51568, Pressure: 100 t Stroke: 0–500 mm Table area: 800 x 650 mm Gsdpfx Abocxxrredsil Ram area: 800 x 600 mm Pass-through opening in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirements (LxWxH): approx. 1.2 x 2.0 x 3.67 m Installation height specified at top stroke. Machine will be retrofitted to meet the latest safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 m/s, Overrun distance: 44 mm.

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm Giodsxddvnspfx Abdol - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: geras (naudotas), Gamybos metai: 2015, Stroji je v dobrem stanju, deli, ki so prikazani ročno, niso vključeni. X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 min⁻¹ HSK 63 Giodpfx Ajwx N Nfjbdel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: 1 važiuoklės įtraukimas dešinėje Gedpfx Abor D N Eqodsil 1 ekscentrinė presė 250 kN 4 standartiniai važiuoklės agregatai 1 siauras važiuoklės agregatas Darbinė sritis: Vielos storio diapazonas: iki 6,0 mm Juostos plotis: iki 80 mm Pritraukimo ilgis: iki 520 mm Galingumas: 10 - 250 vnt./min.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) Gjdefgyicspfx Abdjil · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Sąlyga: geras (naudotas), Gamybos metai: 2009, padavimo ilgis X ašis: 6 000 mm, padavimo eiga Y ašimi: 3 000 mm, padavimo ilgis Z ašis: 1 500 mm, valdiklio modelis: HAIDENNAIN, ruošinio ilgis (maks.): 6 000 mm, ruošinio plotis (maks.): 2 500 mm, stalo plotis: 6 000 mm, stalo ilgis: 2 500 mm, Gantry milling machine with 5-axis head Giedpfsvcqybjx Abdjl

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Giedpfxjcxxyce Abdol High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Wire diameter range: 1.8 - 5.0 mm Ring diameter: 80 - 600 mm Wire feed length: 0 - 10,000 mm Output: up to 30 rings/min Gijdpfxsf Tymbo Abdel Welding transformer: 10 kVA

Sąlyga: naujas, Working length: 3000 mm Working width: 360 mm Roller width: 360 mm Roller diameter: 60 mm Load capacity: 900 kg Height adjustment: 650 - 1100 mm Gjdpefv Attefx Abdjil Machine weight: approx. 0.050 t Dimensions (L x W x H): 3.1 x 0.45 x 0.6 m 3 m roller conveyor with manual length stop.