Diesel Forklift

Still RC 42-40

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2482758, Gamybos metai: 2021, keliamoji galia: 5 000 kg, kėlimo aukštis: 3 000 mm, laisvas kėlimas: 150 mm, apkrovos centras: 500 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 940 mm, galia: 54,4 kW (73,96 AG), variklių gamintojas: Kohler, pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 380 mm, šakių ilgis: 1 200 mm, šakės plotis: 150 mm, šakės storis: 55 mm, posūkio spindulys (vidinis): 2 830 mm, priekinės padangos dydis: 300x15, galinės padangos dydis: 700-12, bendras svoris: 7 150 kg, bendras aukštis: 2 940 mm, bendras ilgis: 3 000 mm, bendras plotis: 1 480 mm, spalva: oranžinė, Įranga: kabina, padėklų šakės, Technical Data - Year of manufacture: 2021 - Speed with/without load: 24 km/h - Cabin roof made of plastic, heater - Number of valves: 3 - Rated load capacity: 5,000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load, laden (kg): 10,780 / 1,360 - Axle load, unladen (kg): 3,300 / 4,060 - Track width (mm): 1,180 - Track width (mm): 1,190 - Mast/Fork carriage tilt angle α/β (°): 6 / 12 - Seat height relative to SIP/stand height (mm): 1,315 - Coupling height (mm): 380 - Aisle width for pallets 1000 x 1200 crosswise Ast (mm): 4,597 - Aisle width for pallets 800 x 1200 lengthwise Ast (mm): 4,797 - Turning radius (mm): 2,830 - Lift height: 3.00 m - Minimum turning point distance (mm): 900 - Travel speed loaded/unloaded (km/h): 22 / 24 - Lifting speed loaded/unloaded (m/s): 0.45 / 0.49 - Lowering speed loaded/unloaded (m/s): 0.38 / 0.26 - Tractive force loaded/unloaded (kN): 28 / 21 - Gradeability loaded/unloaded (%): 20 / 20 - Service brake: Mechanical/Hydraulic - Rated speed (l/min): 2,200 - Number of cylinders: 4 - Displacement (cm³): 2,482 - Emission category according to EU Regulation 2016/1628 Stage III a - On-board voltage (V): 12 Bedjyqzlnspfx Ai Eslp - Drive unit type: Torque converter - Operating pressure for attachments (bar): 200 - Hydraulic flow for attachments (L/min): 101 - Fuel tank capacity: 90 - Towing hitch type: DIN 15170 pin

Gamybos metai: 2009, būklė: geras (naudotas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table Bodpfxopu Anmo Ai Eelp • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Būklė: naudotas, Gamybos metai: 2021, keliamoji galia: 4 000 kg, kėlimo aukštis: 4 000 mm, bendras ilgis: 4 000 mm, - Speed with/without load: 24 km/h - Plastic cab roof, heating - Number of valves: 3 - Rated load capacity: 5000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load (laden): 10,780/1,360 kg - Axle load (unladen): 3,300/4,060 kg - Track width: 1180 mm - Track width: 1190 mm - Mast/Carriage tilt α/β: 6°/12° - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 sideways: 4,597 mm - Aisle width for pallets 800 x 1200 lengthwise: 4,797 mm - Turning radius: 2,830 mm - Minimum pivot distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s - Traction force loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20/20 % - Service brake: Mechanical/Hydraulic - Nominal speed: 2,200 rpm - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission standard according to EU regulation 2016/1628 Stage III a - On-board voltage: 12 V - Drive unit type: Torque converter - Operating pressure for attachments: 200 bar Bljdpfxey S Ep Us Ai Esp - Hydraulic flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Trailer coupling type: DIN 15170 pin

Būklė: naudotas, Gamybos metai: 2021, keliamoji galia: 4 000 kg, kėlimo aukštis: 4 000 mm, bendras ilgis: 4 000 mm, - Speed with/without load: 24 km/h - Plastic cab roof, heating - Number of valves: 3 - Rated load capacity: 5000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load (laden): 10,780/1,360 kg - Axle load (unladen): 3,300/4,060 kg - Track width: 1180 mm Bledpoztgfqsfx Ai Ejp - Track width: 1190 mm - Mast/Carriage tilt α/β: 6°/12° - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 sideways: 4,597 mm - Aisle width for pallets 800 x 1200 lengthwise: 4,797 mm - Turning radius: 2,830 mm - Minimum pivot distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s - Traction force loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20/20 % - Service brake: Mechanical/Hydraulic - Nominal speed: 2,200 rpm - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission standard according to EU regulation 2016/1628 Stage III a - On-board voltage: 12 V - Drive unit type: Torque converter - Operating pressure for attachments: 200 bar - Hydraulic flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Trailer coupling type: DIN 15170 pin

Gamybos metai: 1998, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12254 B521 860, bridge crane ±10,500 mm x 12,500 kg Bljdpfxjv Ip Ego Ai Eop

Būklė: naudotas, Gamybos metai: 2021, keliamoji galia: 4 000 kg, kėlimo aukštis: 4 000 mm, bendras ilgis: 4 000 mm, - Speed with/without load: 24 km/h - Plastic cab roof, heating - Number of valves: 3 - Rated load capacity: 5000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load (laden): 10,780/1,360 kg - Axle load (unladen): 3,300/4,060 kg - Track width: 1180 mm - Track width: 1190 mm - Mast/Carriage tilt α/β: 6°/12° - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 sideways: 4,597 mm - Aisle width for pallets 800 x 1200 lengthwise: 4,797 mm - Turning radius: 2,830 mm - Minimum pivot distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s - Traction force loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20/20 % - Service brake: Mechanical/Hydraulic - Nominal speed: 2,200 rpm - Number of cylinders: 4 Bjdpfjy E Uapjx Ai Eslp - Displacement: 2,482 cm³ - Emission standard according to EU regulation 2016/1628 Stage III a - On-board voltage: 12 V - Drive unit type: Torque converter - Operating pressure for attachments: 200 bar - Hydraulic flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Trailer coupling type: DIN 15170 pin

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2482768, Gamybos metai: 2021, keliamoji galia: 4 000 kg, kėlimo aukštis: 3 000 mm, laisvas kėlimas: 150 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 940 mm, galia: 54,4 kW (73,96 AG), variklių gamintojas: Kohler, pavaros tipas: hidrostatinis, šakių ilgis: 1 200 mm, priekinės padangos dydis: 300 x 15, galinės padangos dydis: 7.00-12, bendras svoris: 7 150 kg, bendras aukštis: 2 940 mm, bendras ilgis: 3 000 mm, bendras plotis: 1 480 mm, spalva: oranžinė, Įranga: kabina, padėklų šakės, papildomi žibintai, priekinė apsauga, šoninis poslinkis, Technical Data - Year of manufacture: 2021 - Travel speed laden/unladen: 24 km/h - Cabin roof made of plastic, with heater - Number of valves: 3 - Rated capacity/rated load: 5,000 kg - Load center distance: 500 mm Bodeyqyrmepfx Ai Eolp - Load distance: 567 mm - Axle load with load (front/rear): 10,780 / 1,360 kg - Axle load without load (front/rear): 3,300 / 4,060 kg - Track width (front): 1,180 mm - Track width (rear): 1,190 mm - Mast/carriage tilt (α/β °): 6 / 12 - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 perpendicular: 4,597 mm - Aisle width for pallets 800 x 1200 lengthwise: 4,797 mm - Turning radius: 2,830 mm - Lift height: 3.00 m - Minimum turning circle: 900 mm - Travel speed laden/unladen: 22 / 24 km/h - Lifting speed laden/unladen: 0.45 / 0.49 m/s - Lowering speed laden/unladen: 0.38 / 0.26 m/s - Drawbar pull laden/unladen: 28 / 21 kN - Gradeability laden/unladen: 20 / 20 % - Service brake: Mechanical/hydraulic - Rated speed: 2,200 rpm - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emissions standard: according to EU regulation 2016/1628 Stage IIIa - On-board voltage: 12 V - Type of drive unit: Torque converter - Operating pressure for attachments: 200 bar - Oil flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Tow coupling type: DIN 15170 pin - Fully functional, general signs of use

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 873 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 3 300 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 450 mm, šakių laikiklio plotis: 1 200 mm, šakių ilgis: 2 400 mm, tuščias svoris: 7 850 kg, pavaros tipas: Diesel, statybos plotis: 1 450 mm, Dyzelinis krautuvas Krovos centras: 600 Stiebo tipas: dupleksas Techninė būklė: gera Priekinės padangos dydis: 300-15/8.00 Galinės padangos dydis: 7.00-12/5.00 Bsdpfx Aovgh U Roi Ejlp Šoninis stūmiklis, 3-iasis vožtuvas, 4-asis vožtuvas, priekiniai darbo žibintai, šildymas, uždara kabina, CE sertifikatas, saugos šviesa,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Capacity: 144 m³/h, operating pressure: 25.5 bar, speed: 1500 rpm, weight: 132 kg. Bodpstpct Nsfx Ai Eslp

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The CIDAN folding machine MEGAPRO is the most powerful member of the product family. Thanks to its solid and robust construction, it enables bending of 6 mm steel (5 mm at 4100 mm) or 4 mm stainless steel (3.2 mm at 4100 mm) across the entire working length (with a working length of 3,100 mm). The MEGAPRO comes standard with many intelligent features such as automatic adjustment of sheet thickness, automatic bending angle adjustment and CNC-controlled crowning in the table. It is also equipped with a pneumatic tool clamping system. Additionally, we offer you various backgauge lengths. Key advantages: - For high speed and precision, the upper beam and bending beam are equipped with dual-driven servo motors. - CNC-controlled sheet thickness adjustment, bending center, and crowning. - Choice of pointed or gooseneck rail (up to 150 mm) can be used. - The upper beam achieves a clamping force of up to 60 tons. Bodpfxjtvl Sgj Ai Eelp Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100 mm) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100 mm) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100 mm)