LPG krautuvai

Still R70-40 // Hubhöhe 4,97m // Treibgas

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Nwjdpfx Agefg E Hpehep Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Zeppelin diesel generator set, type PPO2000-C32 Year of manufacture: 2007 / Engine year: 2014, fully overhauled 2 units CAT C32 diesel engines 400 Volt, 50 Hz 1600 kW, 2000 kVA 1500 rpm Nwjdpfoizbdasx Aghop Dimensions (L/W/H): 11m / 2.3m / 3.2m Weight: 26 t

Gamybos metai: 1972, Sąlyga: geras (naudotas), Power generator, emergency generator, generator set, genset, electricity generator, power generator, backup generator, power generation unit - Manufacturer: PILLER/MWM - Output: 730 kVA 50 Hz - Engine: MWM type TbRHS 518V16, output 850 HP, speed 1500 rpm - Generator: PILLER NKTB 4-1158 - Note: without control unit - Individual components: see photos - Transport dimensions: 6 loading meters - Total weight: 8600 kg Nsdpfxjivql Io Aghewp

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence Nwodpjvvkfdofx Aghop - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas), Dear customers, Our experience has shown that communication by email usually prolongs the process unnecessarily. We would like to assist you quickly, and a three-minute phone call is often more efficient than exchanging emails over three days. TSWc 30.20 Dry Spray Wall Dimensions: 3000 x 2000 mm (W x H) + Fan mounted at the top Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 mm diameter Depth: 900 mm Njdpfxjfn Ndde Aghswp Double filtration: Paper filter + Paintstop filter mat using clamping rail (+180 EUR net) Options/Additional cost for: Paintstop filter mat and clamping rail: 180 EUR net Side deflector plates with hinges: 590 EUR net Images may differ from the actual product. We also offer complete spray booths with supply air units, heat exchangers, supply air ceilings, ducting, etc. Feel free to contact us.

Sąlyga: naudotas, Gamybos metai: 1988, mašinos/transporto priemonės numeris: 1743, UV-coating machine Billhöfer Gula Speed CGS JKN 112, year 1988 – serial no. 1743 Njdpfx Ageh Axquohswp Minimum format: 300 x 500 mm Maximum format: 820 x 1120 mm Automatic Mabeg feeder Paper weight: 60 up to 500 g/m² cardboard Online video inspection via Skype possible We would be very pleased to welcome you for an on-site visit – more machines available from stock. Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – testing on site possible

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Techniniai duomenys: Darbinis ilgis: 4100 mm Atstumas tarp statramsčių: 3550 mm Presavimo jėga: 300 t CNC valdymas: DELEM EPC-3D Valdomos ašys: Y1/Y2; X; R; Z1/Z2 Viršutinė ir apatinė hidraulinė įrankio apkaba: WILA sistema CNC bombiruotė Eiga: 550 mm Iškyša: 405 mm Įmontavimo aukštis: 620 mm 2 vnt. lenkimo pagalbiniai įrenginiai Kampų matavimo sistema Variklio galia: 30 kW Lazerinis stebėjimas Stalo aukštis: 980 mm Matmenys (ilgis x plotis x aukštis): apytiksliai 5550 x 2950 x 3400 mm Svoris: apie 24,5 tonos Priedai: Nwsdpfx Agexdt Umshsp Rankinis įrankių keitiklis Segmentinis lenkimas su laipsnišku lenkimo pagalbinių įrenginių palaikymu (segmentuotas lankstymas) 1 komplektas įrankių Būklė: Labai gera būklė Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašinos vizualinė, techninė būklė ir nusidėvėjimas atitinka amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Nwsdsv Szt Depfx Aghep Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Automatic motorized position adjustment 3 pressure rollers Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: naudotas, rida: 410 000 km, galia: 309 kW (420,12 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, spalva: balta, bendras svoris: 37 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 02/2010, emisijos klasė: Euro 4, Įranga: oro kondicionavimas, patyrė avariją,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 27 500 h, Darbo valandos: 27 500 val. Lazeris įjungtas: 17 000 val. Resonatorius: 5KW Kaina pagal užklausimą Nwjdpfx Agsxbfvwehsp