Kraštų apklijavimo mašina su sujungimu
Stefani Solution XD

Name: Stefani Solution XD
Brand: Stefani
Availability: InStock

Gamybos metai

2016

Sąlyga

Naudotas

Vieta

Nattheim

Kraštų apklijavimo mašina su sujungimu Stefani Solution XD

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Kraštų apklijavimo mašina su sujungimu

Gamintojas:: Stefani

Modelis:: Solution XD

Gamybos metai:: 2016

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: Daimlerstr. 21, 89564 Nattheim, DE

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A20609370

Nuorodos Nr.:: KA-P-24017

Naujinta paskutinį kartą:: Data 2026.01.16

Aprašymas

Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimal panel guidance Edgebanding of rolls, strip edges and solid wood edges GENERAL FEATURES: Single-sided edge banding machine in left-hand version for edgebanding of rolls and strip edges with all conventional hot-melt adhesives. The base frame consists of a stable welded steel stand with high rigidity, providing optimal support for the processing units. The upper pressure section consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned to match the panel thickness. Height adjustment with display on the upper pressure and operator interface. Manual panel feed system with large-sized working line and enlarged support area facilitates the introduction of large workpieces. Adjustable infeed fence in two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically linked to ensure automatic adjustment when changing panel thickness. Lower working units are fixed either to the machine base or the longitudinal rail for precise referencing to the panel. All high-frequency motors are controlled by frequency inverters; each working unit is equipped with its own inverter for optimal flexibility and improved production times. Hood for all units located after the glue station; polycarbonate windows provide good visibility during processing. Internal lighting of the hood with sound-absorbing material for lower noise emissions during operation. Spacers on the infeed fence enable proper spacing of the panels; the distance is automatically adjusted to the selected feed speed. Swiveling control panel, located at the panel infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations, electrical components housed in a metal enclosure fixed to the machine frame with doors for easy access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral). Material feed by feed chain with 80 mm wide chain plates made from rubber-coated nylon, for optimal guidance and high durability. The chain runs on two rails made from hardened and ground steel, one round and one flat, to guarantee straight movement and prevent lateral displacement. Pneumatic chain lubrication; lubrication oil quantity is controlled via the PLC, adjusted according to the processed panels. External roller conveyor runs along the entire machine length; extendable up to 650 mm opening system (for panels up to a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of main functions, including: program processing in Just in Time mode, option for management via material lists, and management functions by reference.
Hfodjxy Tm Iopfx Af Ieb

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2010

135 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 7321 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Nattheim

1 177 km

Kampinė sistema
OkomaUF 3 S

Skambinti

Mažas skelbimas

Vakuuminis membraninis presas, tipas VARIOPRESS Wemhöner Basic 1000 S

Bad Oeynhausen

1 044 km

Vakuuminis membraninis presas, tipas VARIOPRESS
WemhönerBasic 1000 S

Skambinti

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Data: Heated platen size (mm): 2850 x 1550 Heating plate configuration: Upper electrical heating plate in aluminium Total pressing force (kN): 2400 Hjdpev Np H Hefx Af Iefb Maximum chamber pressure (bar): 6 Maximum operating temperature: 180 degrees Celsius Maximum batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film on rolls: film width approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connections: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Peržiūrėti detales

Mažas skelbimas

Vienpusės kraštų apklijavimo mašinos BRANDT HIGHFLEX 1440

Italija

1 694 km

Vienpusės kraštų apklijavimo mašinos
BRANDTHIGHFLEX 1440

Skambinti

Mažas skelbimas

Keturpusis oblius medienai Weinig Powermat 1000

Zielona Góra

660 km

Keturpusis oblius medienai
WeinigPowermat 1000

39 400 €

Pradinė kaina neįskaitant PVM

Skambinti

Mažas skelbimas

Kraštų juostavimo mašina su detalės grąžinimo funkcija BIESSE Stream A 5.0 + Winner

Scerne

1 566 km

Kraštų juostavimo mašina su detalės grąžinimo funkcija
BIESSEStream A 5.0 + Winner

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood thickness: 22 mm PVC/ABS thickness: 3 mm Feed speed up to 25 m/min Electrically adjustable working height via CNC Motorized panel support guide, electronically adjustable via CNC Anti-adhesive unit Prefeeder unit with 2 motors, adjustable electronically via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors and dynamic extraction system following the blades at every movement Offset trimming/chamfering unit with 2 motors, electronically adjustable via CNC Non-stick unit Multifunction corner rounding unit with 2 motors (chamfering + corner rounding) Electronic edge scraper unit, adjustable via CNC Glue scraper unit Brush group “SP-501” Hfjdpfx Aowlbxlef Ieb Automatic return system with overhead discharge Winner 4A

Peržiūrėti detales

Mažas skelbimas

Membraninė presas Wemhöner KT-MB-28/15-240

Verl

1 081 km

Membraninė presas
WemhönerKT-MB-28/15-240

Skambinti

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, * Wemhöner Basic 1000 Plus - pagaminta 2008 m. - labai gera būklė, mažai naudota * Tipas KT-MB-28/15-240 * su automatine kaiščių sistema ir Inline tipo apverčiamuoju įrenginiu * 2 stalai su automatine Vario-kaiščių sistema * su teflonine danga, skirta iš anksto klijuotai plėvelei * plėvelės klojimo sistema stalui (iš anksto klijuota plėvelė) * Kaitinimo plokštės dydis: 2800 x 1500 mm * Maksimalus ruošinio dydis: 2 540 x 1 250 mm * Membrana: yra * Pjovimo stotelė * Plėvelių sandėliavimo paternosteris, 3,2 m aukščio su 14 pakabinamų strypų * PLC valdymas Siemens S7 * Valdymo pultas SIEMENS TP 270 (liečiamas ekranas) SPS valdymui * Automatinis membranos įtempimas * Įdiegta elektros galia 38,5 kW * Didžiausias kameros slėgis 6 bar * Didžiausias presavimo angos atsidarymas 150 mm * 6 cilindrai, Ø 125 mm * Darbinė įtampa 400V 50/60Hz * Presavimo kameros aukštis 40/60 mm * Maksimalus presavimo slėgis 2 400 kN Hsdpexbcudjfx Af Iofb * Hidraulinės sistemos darbinis slėgis 320 bar

Peržiūrėti detales

Mažas skelbimas

Vienpusės kraštų apklijavimo mašinos BIESSE STREAM A

Italija

1 694 km

Vienpusės kraštų apklijavimo mašinos
BIESSESTREAM A

Skambinti

Mažas skelbimas

Vienpusės kraštų apklijavimo mašinos BIESSE + FORMETAL AKRON1445 B AIRTEC

Italija

1 694 km

Vienpusės kraštų apklijavimo mašinos
BIESSE + FORMETALAKRON1445 B AIRTEC

Skambinti

Mažas skelbimas

Vokietija

999 km

Langų sistema
GUBISCHCW 2

Skambinti

Sąlyga: naudotas, Gamybos metai: 1998, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 GUBISCH – CENTROMAT CW 2 For sale on behalf of customer, ex-site Manufacturer’s description: For the production of windows and doors, with a 50 mm spindle diameter for longitudinal profiling. Equipped with the following machining stations and features: - Single-sided slotting automatic for straight and angled joints - Milling unit for longitudinal profiling - Rebating operation with climb milling unit and automatic plunge mechanism - Swiveling frame support up to 650 mm - Central control system 1.0 Crosscut Saw - Automatic plunge from above - Motor power incl. brake: 3.0 kW - Spindle speed: 2,800 rpm - Cutting circle diameter: 350 mm - Spindle diameter: 30 mm - Clamping flange, 1 driving pin 6 mm Ø, TK 42, 120 mm Ø - Pneumatic vertical stroke: 100 mm - Pneumatic horizontal stroke: 160 mm - Against 2 manually adjustable 6-position turret stops - Chip extraction hood with 100 mm diameter extraction port 2.0 Slotting Unit - Motor power incl. brake: 9.2 kW - Spindle speed: 3,800 rpm - Cutting circle diameter: 320 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Fixed pneumatic vertical stroke: 2 x 100 mm - Suitable for 3 tool sets of 100 mm each - Zero height: 10 mm - Chip extraction hood with 160 mm diameter extraction port 3.0 Slotting Table - Table height above floor: 920 mm - Feed with 4 speeds freely adjustable: 1. Milling, angled window and tip speed adjustable via control panel (approx. 7 m/min) 2. Sawing speed approx. 7 m/min (adjustable at the machine) 3. Transfer speed approx. 10 m/min (adjustable at the machine) 4. Return speed / idle mode approx. 25 m/min (adjustable at the machine) - Motor power incl. brake: 0.37 kW - Pneumatic workpiece clamping via oscillating pressure shoes - Pneumatic workpiece clamping - 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter timber device - Counter timber changer with 2-way automatic exchange, and after manual rotation by 180 degrees, 2 more countering positions possible, also automatically counterable 3.2 Length stop - Stop system with 3 scales for: a) Frame outer dimension b) Sash vertical outer dimension c) Sash horizontal outer dimension, manual adjustment - Length with attachable extension: 3000 mm - Swiveling for angled windows +/- 60 degrees Hsdjw I Eawjpfx Af Iofb 3.3 Angle transfer — automatic via vertically timed feed roller in milling feed 4.0 Milling unit - For longitudinal profiling and rebating of windows/doors with the following units: 4.1 First profile milling unit - Contra-rotation - Climb cut with automatic plunge for rebating - Motor power incl. brake: 9.2 kW - Spindle speed: 6000 rpm - Cutting circle diameter: max. 240 mm - Spindles adjustable for min. tool diameter 112 mm, max. 140 mm - Zero height: 10 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Fixed pneumatic vertical stroke - Suitable for 4 sets of tools, 80 mm each (3 x 80 mm) - Pneumatic horizontal stroke: 80 mm - Chip extraction with extraction connection...

Peržiūrėti detales

Mažas skelbimas

Kraštų apipjaustymo mašina BRANDT KDF 120 C Optimat

Italia

1 694 km

Kraštų apipjaustymo mašina
BRANDTKDF 120 C Optimat

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Šlifavimo (priešfrezavimo) įrenginys plokštėms. Dvigubo variklio galinis frezavimas. Briaunų frezavimo įrenginys. Briaunų grandiklis (spindulio/plokščias). Šepečiai. Valdymas: Liečiamas ekranas. Hedpfx Ajx I Izlof Isfb

Peržiūrėti detales

Reklamuokite čia