Radialinio gręžimo staklės

STANKOIMPORT 2A576

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. Pgsdpjxgnz Tofx Af Njg The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: paruoštas naudoti (naudotas), Technische Details: Geschwindigkeit - 130 m/min, Baujahr - 2006, Auslauftisch - 6 m, Drahtdurchmesserbereich 4-12 mm. Podpstndgpofx Af Njgg

Gamybos metai: 1972, Sąlyga: geras (naudotas), Power generator, emergency generator, generator set, genset, electricity generator, power generator, backup generator, power generation unit - Manufacturer: PILLER/MWM - Output: 730 kVA 50 Hz - Engine: MWM type TbRHS 518V16, output 850 HP, speed 1500 rpm Pgodpfxjivql Ie Af Neg - Generator: PILLER NKTB 4-1158 - Note: without control unit - Individual components: see photos - Transport dimensions: 6 loading meters - Total weight: 8600 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Hours on current milling spindle: approx. 900 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Pjdpfewywciox Af Nsgg Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives for linear axes Feed rate X/Y/Z-axes: up to 60 m/min Axis acceleration X/Y/Z-axes: up to 5 m/s² Electrical connection data Connected load: 190 kVA Primary fuse: approx. 315 A Dimensions, weights Machine footprint with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area cover - Chip conveyor - LTA emulsion mist extraction unit Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition, and can still be inspected under power! Images shown are exemplary and are from a new machine of this type. Original images will be provided shortly!

Sąlyga: naudotas, Gamybos metai: 2007, Swing diameter: 300 mm Turning length: 600 mm Control: FANUC 18i-TB Swing diameter over cross-slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel Y: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle motor: 22 kW Spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle motor: 22 kW Spindle torque: 208 Nm Turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Pgsdpsxn Amtofx Af Neg Torque (driven tools): 47 Nm Driven tool motor: 5.5 kW C-axis resolution: 0.001° Rapid traverse (X + Z axes): 20 / 40 m/min Rapid traverse (Y axis): 7.5 m/min Total power requirement: 68.4 kVA Machine weight approx.: 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA, BB208, 210 mm dia., on sub-spindle, various tool holders for turret, short bar loader, HYDRAFEED type MULTIFEED MX-1B for bar diameter 3 – 80 mm and bar length up to 1650 mm; chip conveyor, coolant system with belt filter unit

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Psdjvuuaiepfx Af Nsgg Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Pjdpfx Asu Dxb Tsf Nsgg Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: naudotas, Technical Details: Grinding length: 12,000 mm Grinding width: 2,800 mm Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table surface: 11,990 x 2,500 mm Passage between columns: 2,820 mm Crossrail adjustment: 2,510 mm Table feed rate: 1 – 40 m/min Total power requirement: 110 kW Machine weight approx.: 151 t Space requirements approx.: 32.5 x 9 x 6.73 m The machine is in very good condition for high-precision grinding! In 2022, mechanical components were overhauled by WALDRICH COBURG at a cost of approx. EUR 600,000. Equipped with CNC control SIEMENS 840 D Pjdpfowc A Snjx Af Negg 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimensions: dia. 700 x 130 mm Vertical adjustment: 1,000 mm With dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimensions: dia. 600 x 150 mm Vertical adjustment: 230 mm With dressing device Coolant and filtration unit Various grinding wheel mounts

Sąlyga: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Pgsdpfju Tq U Iox Af Neg Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Grinding wheel: 508x254 (305) mm, regulating wheel: 330x254 (305) mm, regulating wheel speed: 0–115 rpm, grinding wheel peripheral speed: 45 m/s, grinding diameter: 2–150 mm, grinding wheel drive: 45 kW, machine weight: 6.5 t, required installation space: approx. 3.0x1.5 m. The machine will be fitted with a new Siemens S7 control system including new operator panel before sale. The dressing spindle (SS) is electrically actuated via a servomotor. The machine will be thoroughly inspected, with defective parts repaired or replaced. Pgsdpfx Afeuy Ifge Nog Various options available (coolant system, infeed/outfeed, workpiece guides, etc.).