Padėklų gamybos mašina

STAKMA PALLETSTAR

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Parduodamos automatizuotos staklės padėklų gamybai Parduodamas pilnai veikiantis ir patikimas įrenginių komplektas, skirtas efektyviai padėklų gamybai. Sistema su robotizuota ranka, pasukama platforma ir apsaugine zona užtikrina tikslų bei greitą darbą. Hedpex E Nw Asfx Agiji Maksimalus sukalamo padėklo dydis: 1800 × 1200 mm.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,39 kW (25,00 AG), spalva: raudona, bendras svoris: 4 500 kg, tuščias svoris: 3 000 kg, didžiausias leistinas svoris: 1 500 kg, Gamybos metai: 2025, FARMER 815T The modern FARMER 815T telescopic loader – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, as well as service providers in similar industries. We also guarantee after-sales service, even after the warranty period has expired. The loaders are manufactured under the supervision of European technicians based on European technology. The machine is built on a sturdy frame and can operate reliably under all conditions. The comfortable, glazed cabin enables safe and pleasant operation. TECHNICAL DATA: Model: FARMER 815T Operating weight: 3,000 kg Dimensions (L×W×H): 4,100×1,520×2,450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1,500 kg Dumping height: 2,200–3,000 mm Hsdpfx Aoxp Ibxegiei Lifting height: 3,450 mm Discharge reach: 700 mm Wheelbase: 2,100 mm Track width: 1,405 mm Rear frame oscillation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 hp Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated power: 18.8 kW Rated speed: 2,400 rpm Minimum fuel consumption: ≤180 g/kW·h HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom lift/lowering time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling function: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Rigid axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot operated, drum brake (mechanical) Parking brake: Hand operated, disc brake (mechanical) TIRES: Standard tires: 31×15.5-15 Optional tires: 19.0/45-17/MP Front tire pressure: 320 kPa Rear tire pressure: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the only brick-and-mortar distributor of the Kingway brand in Germany. Only here can you see and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway head office in Germany. We have a huge selection of machines in stock, with around 100 machines available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also provide our customers with access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Hjdpfjihpn Njx Agiji Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Hsdpfx Agjd H Sc Eoisi Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Vollautomatische Inline-Maschine für das stabile und präzise Stapeln von Paletten. Die PSR ist benutzerfreundlich und lässt sich einfach auf verschiedene Palettengrößen einstellen. Die Maschine stapelt Paletten sicher und exakt in Lagen, die bereit zum Verladen oder zur Lagerung sind. Die PSR wird am Ende einer Produktionslinie eingesetzt. Funktionsweise: Die PSR hebt den Stapel mit zwei Hubarmen an, während ein Kettenförderer eine neue Palette oder ein Deck unter den Stapel befördert. Die Einstellungen für unterschiedliche Palettengrößen lassen sich ganz einfach per Knopfdruck anpassen. Mychrome bietet verschiedene Zusatzmaschinen an, die unkompliziert an bestehende Anlagen angedockt werden können. So lässt sich die Linie beliebig verlängern und weitere Prozessschritte automatisieren. Anpassungen an Design und Größe der Paletten sind auch mit der Zusatztechnik weiterhin möglich. Deck-/Palettenmaße: Min./Max. Länge: 600 mm – 1.600 mm Min./Max. Breite: 600 mm – 1.600 mm Technische Daten: Bedienpersonal | 0 Länge | 3,3 m Breite | 2,5 m (ohne Plattformleiter) Höhe | 2,3 m Hedpfjwduv Ijx Agisi Leistung | 3 kW, 3x400 V+N Pneumatik | 7 bar, getrocknete Druckluft: 200 l/min Maschinenleistung | 4 Paletten oder Decks/Minute Standardausstattung | Motorisierte Verstellungen

Sąlyga: naudotas, Gamybos metai: 2000, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 4 kW Padavimo greitis: 5–24 m/min. Weinig Unimat 23E keturpusio obliavimo ir profiliavimo automatas, skirtas medienai obliuoti ir profiliuoti iš visų keturių pusių, turintis mobilų veleną automatiniam reguliavimui bei griovelių stalą (pasirinktinai be griovelių stalo) trumpiems ir lenktiems ruošiniams bei ilgą lyginimo stalą. Papildomai: Pakeitimas į įprastą lygų stalą pagal užklausą. Velenas 1: Apačioje / 40 mm / 5,5 kW Velenas 2: Dešinėje / 40 mm / 7,5 kW Velenas 3: Kairėje / 40 mm / Bendras variklis su 2-uoju velenu Velenas 4: Viršuje / 40 mm / 7,5 kW Hedpfswztw Sox Agiei Velenas 5: Apačioje / 40 mm / 5,5 kW

Sąlyga: geras (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 80 kg, bendras plotis: 990 mm, bendras aukštis: 870 mm, bendras ilgis: 1 180 mm, krovimo aukštis: 800 mm, bakelio talpa: 900 l, tuščias svoris: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers, made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Hedpovtckmjfx Agiei Stacking height: 800 mm Internal height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for segregated construction waste. They were emptied into larger transfer containers via forklift with rotator attachment. Therefore, these stacking containers were manufactured with extra heavy-duty walls. The sale is subject to prior sale, excluding any warranty or guarantee, to commercial customers only. We would be pleased if these steel stacking containers are of interest to you. Best regards, Your Service Team, Mertens & Frowein GmbH

Sąlyga: naujas, Gamybos metai: 2024, ♻ Universalus pritaikymas (mediena, padėklai, įskaitant vinis ir smeiges, medienos plaušo plokštės ir likučiai, fanera, MDF plokštės, plastikas ir kt.) ✔ Variklio galia: 18,5 kW ✔ Rotoriaus ilgis: 870 mm ✔ Rotoriaus skersmuo: 270 mm ✔ Rotoriaus apsisukimų dažnis: 80–120 aps./min ✔ Pjaustymo peilių skaičius: 2x19 ✔ Granuliavimo dydis: 10–50 mm ✔ Našumas: iki 7 m³/val.* ✔ Nusiurbimo jungtis: 200 mm ✔ Užpildymo anga: 1446 x 1565 mm ✔ Matmenys (I/P/A): 2,15/1,97/2,04 m ✔ Svoris: 2050 kg 2 metų garantija arba 2000 darbo valandų Hedpshzlr Iofx Agiei

Sąlyga: naujas, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 metres in length without the need for pre-cutting or sawing. At the core are rotors with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is inserted into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator further processes the material into directly re-usable regrind. Hsdpeghgd Iefx Agioi The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, avoidance of power peaks, and minimised risk of accidents during pre-shredding.

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Hjdpfxsw Sy T Hs Agiei Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim