Plieninė virvė tempimo įrenginiui 1,6 t

Stahl Ø 11 mm 20 m

Būklė: geras (naudotas), Daugiafunkcinis tempimo įtaisas, Greifzug, kėlimo įrenginys, montavimo tempiklis, lyno užtrauktukas, universalus lyno tempiklis, lyno įrenginys, plieninis lynas tempiklio -Plieninis lynas: daugiatikslui tempiklio -Lyno skersmuo: 11 mm -Ilgis: 20 m -Transportavimo matmenys: 360/90/A400 mm Gjdpjxbyaqefx Af Doua -Svoris: 12,4 kg

Būklė: naudotas, Gearbox, bevel gearbox, worm gearbox -Gearbox: Worm gearbox, gear ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm Gjdpot Snwxefx Af Djua -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Būklė: naudotas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Guodpfevc Awxox Af Doa Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Būklė: naujas, Cutting capacity at 90 degrees: round 500 mm Gsdpjupxupefx Af Doua Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600x400 mm Saw blade length: 5320x34x1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirements: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre left & right 60° • Frequency-controlled saw drive • 34 mm band height • Wear-free, ball-bearing material support turntable • Saw blade guides can be positioned on extra-wide linear guides • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable swarf tray (for cleaning) • Free-standing, safe and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast clamping (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range (round) from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering to material start, or in series cuts, begin cutting immediately 4. Stop saw blade 5. Raise frame just above material 6. Open vice

Būklė: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 120 mm, pjovimo plotis (maks.): 350 mm, Mehrblattkreissäge mit Besäumer CML Modell J 350 RT, CE, 37 kW Guodpfxevlxbxj Af Doa

Būklė: geras (naudotas), Robland planer thicknesser 3 Tersa knives 1 feed speed for thicknessing Gedpfxsvyhmgo Af Djua Thicknessing height: 230 mm Worktable sound-dampening combs Table length: 140 cm The machine is in good working condition and ready for operation.

Būklė: geras (naudotas), Tyres, tractor tyres, soil cultivation, seed drill Gedpfjb A Rtrox Af Dsua - Quantity: 2x tyres - Tyre size: 180/90-16 IMP - Dimensions: Ø 700 mm - Total price: for 2 tyres - Weight: 40 kg each

Būklė: geras (naudotas), Amplifier controller, servo motor controller, power controller, thyristor power controller, thyristor controller, power regulator Guedpfx Afoubfyhj Doa -Manufacturer: Gefran, power controller, power regulator -Type: GTF-25-480 -Quantity: 5x power controllers available -Price: per unit -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/unit

Būklė: naujas, Description Work table made of heavily ribbed cast iron and base frame constructed from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: sliding table made from anodized aluminum for maximum cutting precision. Cutting plane directly at the saw blade. Tilting saw blade from 90° to 45°. Crosscut fence with aluminum length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling tasks. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Net weight approx. 190 kg Extraction Connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated operating mode of drive motor S6 Duty cycle drive motor 40 % Power of drive motor 2 x 1.8 kW Sliding Table and Work Table Sliding table length 1,140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1,040 mm Table width 224 mm Spindle Moulder Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speeds 5,000 / 7,500 rpm Max. Cutter Diameter Max. tool diameter 160 mm Max. tool diameter tenoning 200 mm Circular Saw Unit Crosscut length 1,200 mm Cutting width with rip fence 700 mm Max. crosscut width left of the saw blade 1,200 mm Saw blade tilt 90 – 45° Max. cutting height 90°: 75 mm Max. cutting height 45°: 60 mm Max. saw blade projection 90°: 67 mm Max. saw blade projection 45°: 40 mm (Main) saw blade diameter 250 mm (Main) saw blade speed 4,000 rpm Equipment Anodized aluminum sliding table Squaring frame with angle-adjustable length stop, one folding stop, and degree scale Saw rip fence Eccentric clamp Table extension Guodpfsvwfqwox Af Dja Spindle moulder fence with wooden pressure jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Būklė: naujas, Gamybos metai: 2024, galia: 1,2 kW (1,63 AG), SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG CAPACITY 5M LIFT HEIGHT RR15HH450E FREE-LIFT Powerful professional equipment with a load capacity of up to 1,500 kg ✅ Achieves a lift height of 5m ✅ Free-lift: Mast only extends after reaching the height of the lifting frame – ideal for low ceiling heights ✅ Robust triplex mast & heavy-duty chassis ✅ Charger included ✅ Equipped with powerful 24V 200Ah lead-acid batteries ✅ Digital battery level indicator & hour meter ✅ Small turning radius of just 1,575mm – ideal for confined working areas FEATURES & SPECIFICATIONS Robust and premium design Thanks to its sturdy and durable construction, the high-lift stacker offers excellent stability and longevity. With a lifting capacity of 1,500kg, this stacker is a true powerhouse, providing the strength needed to effortlessly raise heavy loads up to 5m high. Free-lift function: Thanks to its free-lift, the stacker is especially suitable for warehouses and rooms with low ceilings or restricted entry heights. The triplex mast only extends above the lifting frame height (1,570mm), enabling safe and effective operation in tight spaces. Combined with a lift height of 5m, this unit is a genuine all-rounder. Gusdpfjqwdltox Af Dsa Charger included: The built-in 24V lead-acid battery with a 200Ah capacity ensures long run times. For recharging, simply plug the electric stacker into a standard 230V outlet using the included charger. Easy operation: The high-lift stacker is simple to operate and features a high-quality, waterproof control unit, allowing temporary use in damp or cool areas. The control instruments – such as the battery charge indicator, emergency stop switch, and key – are centrally located and always within the operator’s line of sight. Thanks to its compact turning radius of just 1,575mm, this electric stacker is especially agile and suitable for versatile applications. Multiple drive modes: With several driving modes, the SCHORR high-lift stacker offers maximum flexibility and perfectly adapts to the user’s needs. In addition to the standard travel speed of approx. 5.8 km/h, there is a “creep mode” for slow and precise maneuvering, making it ideal for navigating narrow aisles and racks. Technical Data Manufacturer (Abbreviation): SCHORR Model Designation: RR15HHE Free-lift Load capacity: 1.5t Model: 500E Own weight incl. batteries: 1,155kg Drive: Electric Tyres: Polyurethane Basic Dimensions Total length: 1,975mm Total width: 820mm Length including fork back: 905mm Lift: 5,000mm Free-lift: 1,740mm Mast height retracted: 2,214mm Mast height extended: 5,510mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1,150mm Fork outside distance: 570mm Aisle width with pallet (800x1200 lengthwise): 2,450mm Turning radius: 1,575mm Speeds Travel speed with/without load: 5.8km/h / 6.0km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. gradeability with/without load: 6% / 15% Would you prefer to finance or lease this machine? No problem! We offer attractive options for both. Just get in touch, and we will advise you on the various possibilities. We look forward to your inquiry!