Robotas valdiklis CS7MB RX60

Stäubli RX 60

Sąlyga: geras (naudotas), Stäubli Model: RX 60B EX Robot: Lifting capacity (rated load - kg): 2.5 kg Weight: 44 kg Type: RX 60B EX Control unit: 3X400V-50/60 Hz-3000VA Weight: 170 kg Nsdobwz Icspfx Abajdd Type: CS8 EX RX60B EX Robot is offered without any guarantee of functionality! Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Robotas Gamintojas: Staeubli Tipas: RX170 251125ä Ndedpsbrhtdjfx Abaod

Sąlyga: naudotas, TECHNICAL DATA RX60CR from 1998 with its CS7B cabinet RX60B from 2002 Ndsdpoug U Avofx Abaed

Sąlyga: geras (naudotas), Stäubli Model: RX60 L Stäubli Robot RX 60 L with control unit and handheld control panel Control unit RX60 Payload (nominal load - kg): 1.5 kg Ndjdpfx Abecgfgqjajd Suitable for assembly cell / robot cell! Total weight: 44 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) For further questions, we will be happy to assist you by phone.

Sąlyga: geras (naudotas), Oil Diffusion Pump Manufacturer: Leybold Model: DIP 50,000 Condition: Used Technical Data Product: DIP 50000 Catalog No.: 22240 Inlet Flange: DN 1000 ISO-F Outlet Flange: DN 160 ISO-K Pumping Speed for Air Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50,000 l/s Operating Range: 1.0 x 10-2 - 5.0 x 10-7 mbar / 7.5 x 10-3 - 3.8 x 10-7 Torr Ultimate Pressure: < 5.0 x 10-7 mbar / < 3.8 x 10-7 Torr Max. Permissible Fore-vacuum Pressure: 6.0 x 10-2 mbar / 4.5 x 10-2 Torr Operating Fluid: Pump is supplied without operating fluid Operating Fluid Volume min.: 12.0 l / 12.7 qt max.: 25.0 l / 26.4 qt Power Supply: 3-phase Y, 400 V, 50/60 Hz Heating Power: 24 kW Number of Heating Cartridges: 24 Heat-up Time: < 30 min Number of Cooling Water Circuits: 3 Minimum Cooling Water Requirement Pump: 1500 l/h / 6.6 gal/min Jet Cap Steam Barrier: 150 l/h / 0.66 gal/min Max. Cooling Water Pressure: 6 bar / 87 psi Cooling Water Connections: Pump: 1/2", female thread Jet Cap Steam Barrier: 3/8", female thread Ndedpfx Asdnv A Usbaed Dimensions: see dimensioned drawing Weight: 560 kg / 1235 lbs

Sąlyga: naudotas, Rotary vane vacuum pump – oil-lubricated Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Nodpfjcnyy Hex Abaodd Condition: Fully overhauled Warranty: 12 months Includes: Initial oil fill (mineral oil), operating manual with spare parts list Voltage: 50/60Hz 230–400/460V Motor rating: 4 kW Nominal pumping speed: approx. 200 m³/h Ultimate pressure without gas ballast: approx. 0.08 mbar Availability: Ex stock

Sąlyga: geras (naudotas), Gamybos metai: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year of manufacture: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry newly set. Travels: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Controller: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 Machine equipped as follows: - 60-position tool changer - ICS (internal coolant supply, 20 bar) with band filter system - Air through the spindle - Kessler rotary table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating sight glass - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction unit - Heidenhain linear measuring systems X, Y, Z - Sealing air for all linear measuring systems - Active electrical cabinet cooler (air-to-air) - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Regulated spindle chiller - Heidenhain rotary measurement system Nsdjwz I Acspfx Abaodd - Contour protection POSkontur - Exterior hinge-belt chip conveyor - Coolant supply pump at head controlled via M functions - Pump for chip flushing device - Chip flushing device - Machine status beacon - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - Triple media interface in table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W: 4,800 / D: 4,600 / H: 3,000 mm + ICS unit (LxWxH): 2,200 x 1,300 x 1,400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry set (guides repaired and adjusted). Since then, the machine has seen only limited production usage.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Kuka KR10 R1100 Sixx KRC4 including control panel, cables, and control cabinet. 15,700 operating hours Nsdpfomdrpvox Abajdd We can also offer you the robot fully refurbished upon request! 2 additional units available with: 16,500 operating hours 16,000 operating hours

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel path X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER Ndodpfx Aeup Hw Eobasd - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive capacity: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 48,894 hrs. ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Sąlyga: naudotas, Tool presetting device EZSET EZ400 Nsdjuhb Stjpfx Abaedd