SSK200-220kW kondensacinis dujinis katilas

SSK200-220kW SSK200-220kW

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. Dwodovz Hq Tspfx Alxsc - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Djdpfovz Hqtjx Alxjwc Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, - NEW - without side panels and without base frame Kanuk® Original Hot Air Furnace - Firebox opening H x W (cm): 31 x 31 - Flue outlet: top / rear - Efficiency (%): 83.9 - Log length (cm): 48 - Minimum chimney draft (Pa): 16 - Ash drawer: No - BImSchV Stage 2: Yes - Lignite briquettes: No - CE marking: Yes - Total output (kW): 17.7 - Space heating capacity (m³): 540 - Viewing window (cm): 24 x 14 - Weight (kg): 153 - Wood consumption (kg/h): 4.2 - Flue throttle: No - Design type 1 (self-closing door): Optional - Firewood, wood briquettes: Yes - AT §15a B-VG Standard: Yes - External air connection (mm): 80 mm - Dimensions H x W x D (cm): 80 / 58 / 95 - Flue outlet (mm): 160 - Door diameter (cm): 28 - Exhaust gas temperature (°C): 232 Djdpfxsvyd Awo Alxswc - Flue mass flow (g/s): 14.28 - Firebox H x W x D (cm): 40 x 44 x 49.5 - Airwash: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes Ref. 2100108

Būklė: labai geros būklės (naudotas), Hertz energy-saving boiler 50 kW Dwodpfxjq I Nfhe Alxjc

Būklė: geras (naudotas), „Kroll M 150“ – mobilus oro šildytuvas Paskirtis: Pastatų, palapinių ir statybviečių šildymas Dwjdpfx Asxwkw Eelxec Šaltinei atspari aplinka sodininkystės ūkiuose arba bet kokio tipo sandėliuose Greitas naujų pastatų džiovinimas Papildomas šildymas šaltuoju metų laiku Kuras: dyzelinis kuras EL Nominali šiluminė galia: 135 kW Nominali šiluminė apkrova: 150 kW Alyvos srautas: 12,7 kg/val. Oro srautas: 7 300 m³/val. Elektros prijungimas: 220 V / 6,1 A Galia: 1,38 kW Apsaugos klasė: IP 44 Matmenys: Ilgis: 2600 mm Plotis: 900 mm Aukštis: 1300 mm Svoris: 270 kg Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos teiraukitės!