Kraunamoji talpykla Konteineris Metalinė talpykla

SSI Schäfer / Feuerverzinkt / 3 Stück / Abm.: 850x550x670mm (BxTxH) / 4 Kranösen

Gamybos metai: 1993, Sąlyga: naudotas, Offer: DC motor, 90 kW. For further technical data, please refer to the nameplate. Kdjdocdt S Sjpfx Ah Usw

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) Kjdpfeh Ek Dajx Ah Uodw - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: geras (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 80 kg, bendras plotis: 990 mm, bendras aukštis: 870 mm, bendras ilgis: 1 180 mm, krovimo aukštis: 800 mm, bakelio talpa: 900 l, tuščias svoris: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers, made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for segregated construction waste. They were emptied into larger transfer containers via forklift with rotator attachment. Therefore, these stacking containers were manufactured with extra heavy-duty walls. The sale is subject to prior sale, excluding any warranty or guarantee, to commercial customers only. Kdsdpfxjvtckmo Ah Usw We would be pleased if these steel stacking containers are of interest to you. Best regards, Your Service Team, Mertens & Frowein GmbH

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. Kdjdemhhypspfx Ah Uew When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Ksdpemkixwjfx Ah Usdw Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Sąlyga: naujas, Solid round material 30 / 900 mm Solid square material 30 / 900 mm Angle steel 35x35x5 / 600 mm T-section steel – web facing outwards 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roller diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Electric profile bending machine - Option for horizontal or vertical operation - 1 set of hardened standard rollers - Bottom 2 rollers are powered - 1 set of plastic rollers for diameter 33.7 mm / 1" Kdodpfx Asq Adtqeh Usw - Operating manual - Foot switch for left/right and emergency stop

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. Kedpfxemhhyae Ah Uedw The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard Kdodpfx Ahsmhh Dzo Uew - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Sąlyga: naujas, mašinos/transporto priemonės numeris: 85162, System: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel CM-G-C262 ID No.: 85162-3 Flow rate: 10 m³/h Motor power: 5.5 kW Motor speed: 1450 rpm Kedsd E S Sfjpfx Ah Usdw Piston diameter: 130 mm Suction side connection flange: DN 80 PN 16 DIN 2633 Discharge side connection flange: DN 80 PN 40 DIN 2635 Application: filter press feeding Suction flow stabilizer: made of steel Suction crossbeam: 262, made of steel Other accessories: such as drain valve, pressure gauge, etc. Photo: similar construction The Abel hydraulic diaphragm simplex piston pump, in horizontal design, is double-acting, slow-running, self-priming, and safe for dry running. The pump flow is regulated in an energy-efficient manner by a frequency converter, with the drive speed controlled based on the discharge pressure. We also offer our piston diaphragm high-pressure pumps in specialized tunnel construction versions. Do you have specific requirements? Contact us for more information.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X387L00867, Gamybos metai: 2022, veikimo valandos: 1 108 h, keliamoji galia: 2 300 kg, kėlimo aukštis: 4 400 mm, laisvas kėlimas: 1 320 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 090 mm, šakių laikiklio plotis: 1 150 mm, šakių ilgis: 1 100 mm, tuščias svoris: 3 702 kg, bendras ilgis: 2 350 mm, pavaros tipas: Elektro, statybos plotis: 1 150 mm, Electric 4-wheel forklift Kdodpfx Ahjwz S Dwo Ujw Chassis number: H2X387L00867 Load centre: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 23x9-10 Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres size: 200/50-10 Rear tyres condition: 60 - 80% Battery voltage: 80V Battery capacity: 460Ah Battery manufacturer: Linde Battery type: PzS Battery year: 2022 Battery condition: 60 - 80% Description: The machine is fully functional and compliant with the latest safety inspection (UVV). A charger is integrated into the forklift. Slight reddish discolorations due to previous use in metal fabrication. Sideshifter, 3rd valve, 4th valve, rear working lights, front working lights, full cabin, full free lift, interior mirror, beacon,