H-rėmo presai

Soenen 400 Ton + 160 ton

Sąlyga: naudotas, Gamybos metai: 1991, Pressure: 650 t Clear width: 920 mm Stroke: 1750 mm Approx. machine weight: approx. 47 t Table size: 2000 x 1500 mm Ram size: 2000 x 1500 mm Installation height: 2100 mm Hydraulics: 203 bar Closing speed: 500 mm/min Pressing speed: 0.5 - 10.4 mm/sec Opening speed: 250 mm/sec Hjdpfx Agefhmuvjiji Release speed: 0.5 - 66.4 mm/sec Return force: 150 t Total power requirement: 75 kW Space requirement approx.: 4.4 x 2.5 x 7.5 m

Sąlyga: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 500 t, Hydraulic 500 T Portal Straightening Press with tooling – clamping device and parallel guidance for bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000x850 mm d) Open height 1500 mm e) Overall dimensions approx. LxWxH 1500 x 3000 x 4300 mm f) Oil temperature indicator on tank g) Lubrication via grease nipples h) Table in grid/raster construction i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary knob k) Table moves outward hydraulically by 700 mm for loading l) Cylinder moves left and right via rack and pinion drive m) Machine body powder-coated, or double-painted n) T-slots according to customer specification o) Cylinder induction-hardened p) Assembly, commissioning, and operator training available at extra cost Press design: GANTRY PRESS Thermally neutral: 80–120°C Number of operating sides: 3 sides Forces Max. pressing force: 5,000 kN Max. free lifting force: 800 kN Pressure build-up time (closed tool, steel on steel): max. 3 sec. Dimensions Max. opening width: 1500 mm Stroke and min. opening: 1300 mm/200 mm Table height above floor approx.: 850 mm Height above floor (overall height): approx. 4,300 mm Minimum hall height: 5,000 mm Deflection Determined at max. clamping force with 70% occupancy ≤ 1.2 mm/m Weight Total weight of press without operating fluids and table plate: approx. 25 T Speeds Hsdpfx Agjwgakvjisi Rapid closing: 17 mm/sec Pressing speed at F max.

Sąlyga: naudotas, Gamybos metai: 1991, Pressure: 500 t Column clearance: 3200 mm Stroke: 1250 mm Distance table/ram, max. stroke up, upper adjustment: 1810 mm Table size: 3000 x 1900 mm Cushion pressure in the ram: 150 t Cushion stroke in the ram: 200 mm Cushion area in the ram: 2400 x 1200 mm Hsdpfxovuk Txe Agioi Ram area: 3160 x 1900 mm Downward speed: from 400 mm/s Upward speed: 250 mm/s Working speed: 18 - 58 mm/s Height above floor: 6.5 m Drive power: 90.0 + 36.5 kW Weight: 110 t Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in the ram, ram locking mechanism Year of construction: 1976 - modernized in 1991 As is, where is, WITHOUT commissioning, partly disassembled and stored

Sąlyga: naudotas, Gamybos metai: 2010, Spaudimas 315 t Stulpų tarpas 1800 mm Hodpevuubmjfx Agisi Eiga 400 mm Atstumas stalas–stumtuvas, maks. eiga, viršuje reguliuojama 650 mm Stalo plotas 1800 x 1000 mm Stalo aukštis virš grindų 900 mm Ištraukimo pagalvės spaudimas stale 80 t Ištraukimo pagalvės eiga stale 100 mm Ištraukimo pagalvės plotas stale 1300 x 600 mm Šoninis stulpų pravažiavimas 600 mm Stumtuvio plotas 1800 x 1000 mm Nuleidimo greitis nuo 400 mm/s Pakėlimo greitis iki 300 mm/s Darbinis greitis 15–80 mm/s Alyvos tūris 1700 l Variklio galia 55,0 kW Svoris 27,5 t Užimamas plotas (PxGxA) 3,1 x 2,2 x 4,6 m Pagaminimo metai 1980 – modernizuota 2010 Leidžiama rankiniam įkrovimui pagal vokiečių darbo saugos taisykles (UVV) su alyvos hidrauline pavara, stalo hidrauline ištraukimo pagalve nereikalauja pamato duobės nereikalauja pamato duobės Galima pasiūlyti nenaudojant (BE ekrano / valdymo pulto) arba su nauja Siemens S 7-1500 F valdymo sistema, nauju valdymo pultu ir nauja vartotojo sąsaja.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 100 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its H-frame structure with 8 slideways, maximum rigidity is assured during pressing, while parallelism and perpendicularity tolerances remain stable throughout the long stroke. The CHSP 300/100 model is designed for deep drawing and forming operations that require high tonnage, featuring a 300-ton main ram and a 100-ton cushion ram (blank holder). The frame construction undergoes stress relief by vibration to ensure durability and reliable operation over its lifetime. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slideway bushings - WPQR and WPS welding procedures approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system statuses on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 300 tons - Capacity (Cushion): 100 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/meter - Perpendicularity Tolerance: 60 microns/meter - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS accredited by TURK-AK - EN ISO 15614-1/2017 - Welding operations are overseen by “welding coordination engineers” certified according to EN ISO 14731 - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Forming Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 Hsdpfxox N Uhbe Agioi - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 4400 mm - Approximate Width: 3250 mm - Approximate Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 21 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, tarpas tarp stulpų: 1 000 mm, atitraukimo jėga: 80 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 250 / 80 TON FOUR-POST HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-post hydraulic drawing press is a high-rigidity, four-post hydraulic press solution designed for metal forming, deep drawing, and precision press applications. The ST52 quality steel welded frame undergoes stress relief through a vibration method, ensuring excellent parallelism and perpendicularity tolerances are maintained during prolonged operation. The ram and cushion systems operate independently, with stroke and pressure settings precisely adjustable via the touch panel interface. Utilizing REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled architecture, this press offers high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton capacity, this model is the ideal industrial press solution for medium to heavy-duty metal forming, deep drawing, and die applications. Key Benefits - High-rigidity four-post press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Durable design with low maintenance requirements Areas of Application Hedpfex N Um Rsx Agiei - Metal forming operations - Deep drawing processes - Die trial and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-post FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 250 Tons CAPACITY (CUSHION): 80 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING: 100 mm MAX. OPENING: 900 mm WELD STRESS RELIEF: By vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER INNER DIAMETER: Ø 360 mm – Ck45 CUSHION CYLINDER INNER DIAMETER: Ø 200 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm DIE TABLE HEIGHT FROM FLOOR: 1300 mm MAIN FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Technical Specifications Tonnage: 300 T Clear distance between uprights: 2,100 mm Stroke of the cylinder: 600 mm Max. opening between heating plates: 800 mm Heating plate dimensions: 1,800 x 1,100 mm Table height from floor, incl. damping plates and heating plate: 800 mm Overall height approx.: 3,600 mm Width approx.: 3,800 mm Depth approx.: 1,870 mm Weight approx.: 22,000 kg Hydraulic power unit by BOSCH REXROTH Hydraulic pump by BOSCH REXROTH: 105 L/min, 22 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Alternative: Hydraulic power unit by DUPLOMATIC Hydraulic pump DAIKIN HYBRID SERVO: 130 L/min, 15 kW Approach speed: 150 mm/sec Hsdpfxjx Ap Itj Agiji Working speed: 15 mm/sec Return speed: 150 mm/sec Two-hand operation Ram return by pressing the blue button Stroke limitation via Leuze measuring rod and monitor Lower fixed table with T-slots, as X: 2,100 x 1,100 mm Ram with T-slots, as X, size: 1,900 x 1,100 mm CE certificate and user manual: Included in delivery