Ekscentrinis presas - viena kolona

SMERAL LEN 63 C

Sąlyga: naudotas, Technical Details: Pressure: 63 t Throat depth: 315 mm Slide adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Strokes per minute: 71 - 140 spm Strokes per minute (single stroke): 45 / 50 spm Clearance between side frames: 355 mm Installation height: 335 mm Table: WxD: 800 x 630 mm Dodpfxovt Nvpo Admjwf Pass-through opening in table: 400 x 130 mm Clamping plate: WxD: 616 x 85 mm Ram clamping area: WxD: 450 x 280 mm Pin hole in the ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Weight of machine approx.: 5.9 t Control cabinet dimensions LxWxH: 0.86 x 0.30 x 1.3 m Machine dimensions approx. LxWxH: Press: 1.42 x 1.8 x 2.6 m High-Performance Press with Roller Feeder/Strip Line and Straightening Machine Application: suitable for series production Equipped with servo roller feeder MINI: tested until 01/2021 - Manufacturer: P/A GmbH, Type: SRF 220 - for strip width 220 mm - Feed rate: 150 m/min - Operation with hand-held unit Straightening System: - Manufacturer: Wanzke, Type KS 150 - Infeed width max. 200 mm - 2 powered infeed rollers - 4 driven straightening rollers (top), adjustable vertically approx. 30 mm - 5 driven straightening rollers (bottom), fixed, not adjustable Decoiler = Special design: - mechanical/manual - External diameter max. Ø 1,500 mm - Internal diameter max. Ø 300 mm - Width max. 200 mm Roller table: - Roller conveyor system with 9 roller rails, total 53 rollers (Ø 25x25 mm)

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t Dwodpfx Ajt Ii Rrsdmsf High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: geras (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 63 t, Press LEN63C Djdpeu Nkfuofx Admswf

Sąlyga: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 25 500 mm, stalo plotis: 800 mm, stalo ilgis: 630 mm, eigos reguliavimas: 105 mm, bendras plotis: 14 250 mm, bendras ilgis: 17 900 mm, bendras svoris: 5 850 kg, spaudimo jėga: 63 t, aukščio reguliavimo tipas: mechaninis, galia: 7,5 kW (10,20 AG), Eccentric Press LEN 63C. Year of manufacture: 1989 (SMERAL TRNAVA, Czech Republic). Technical specifications: - Pressing force: 63 tons - Number of strokes in automatic mode: 65/130 per min - Number of strokes in manual mode: 45/50 per min - Slide stroke adjustment: 10-105 mm - Slide stroke: 70 mm - Table surface: 800 x 630 mm - Slide surface: 450 x 280 mm Dwsdpfxstzxdzo Admof - Throat depth: 315 mm - Distance between table and slide: 335 mm - Clearance between uprights: 355 mm - Number of speeds: 2 - Motor speed: 730/1440 rpm - Motor power: 4/7.5 kW - Machine dimensions: 1425 x 1790 x 2550 mm - Weight: 5850 kg Technical condition: good. Inspection and test run of the machine are possible.

Sąlyga: naujas, Gamybos metai: 2024, 10-ton container rotator Djdsifk Rbepfx Admowf Dual synchronized drive Continuously adjustable axle spacing via threaded spindle Continuously variable speed control With foot remote control Suitable for diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed range: 200 - 1,200 mm/min.

Sąlyga: naudotas, Gamybos metai: 1986, Technical details: Pressure: 63 t Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Dedpou N Dafsfx Admjwf Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Approx. machine weight: 5.9 t Approx. machine dimensions LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with a tilting frame (25°) and combined single and stroke safeguard (overload protection). Available operating modes: Single stroke by foot pedal (slow/positioning mode) and/or by hand control (slow) Continuous stroke by foot pedal (slow and fast) and/or by hand control (slow and fast)

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts Dedpfx Ajd Nl E Ujdmswf exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: naudotas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] Dwodpfx Adsuhcbcemef - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Axis travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide diameter: Ø 0.25 [mm] - Tank capacity: 260 [l] - Machine dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control unit - Cooling unit - Lubrication tank with pump - Automatic wire threading

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2852, Gamybos metai: 2006, keliamoji galia: 8 000 kg, kėlimo aukštis: 5 000 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 150 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 120 mm, bendras plotis: 2 220 mm, papildomos įrangos savybės: Dual tread, Weight system, Fire extinguisher, Įranga: apšvietimas, TCM FD80 iš Uniktruck Dwodpsrk Rd Njfx Admof

Sąlyga: naudotas, Gamybos metai: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range max.: 4,000 rpm Main spindle drive power: 35 / 45 kW Maximum torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Maximum usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool positions: 12 stations Number of driven tool stations: 12 stations Speed range - driven tool stations max.: 4,000 rpm Drive power (driven tool stations): 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec. Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Dodsvzhiwspfx Admewf y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirements: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Connection for bar feeder / bar loading magazine