Ekscentrinis presas
SMERAL LEN-63C

Name: SMERAL LEN-63C
Brand: SMERAL
Price: 10000 EUR
Availability: InStock

fiksuota kaina neįskaitant PVM

10 000 €

Gamybos metai

1989

Sąlyga

Naudotas

Vieta

Krobia

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Ekscentrinis presas

Gamintojas:: SMERAL

Modelis:: LEN-63C

Gamybos metai:: 1989

Sąlyga:: geras (naudotas)

funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

fiksuota kaina neįskaitant PVM

10 000 €

Vieta:: Dolina Drwęcy 39A, 87-162 Krobia, PL

Skambinti

Techniniai duomenys

Bendras aukštis:: 25 500 mm

Stalo plotis:: 800 mm

Stalo ilgis:: 630 mm

Eigos reguliavimas:: 105 mm

Bendras plotis:: 14 250 mm

Bendras ilgis:: 17 900 mm

Bendras svoris:: 5 850 kg

Spaudimo jėga:: 63 t

Aukščio reguliavimo tipas:: mechaninis

Galia:: 7,5 kW (10,20 AG)

Pasiūlymo informacija

Sąrašo ID:: A16436341

Naujinta paskutinį kartą:: Data 2024.09.24

Aprašymas

Eccentric Press LEN 63C.
Year of manufacture: 1989 (SMERAL TRNAVA, Czech Republic).
Technical specifications:
Hjdpjtzxdzefx Acusnu
- Pressing force: 63 tons
- Number of strokes in automatic mode: 65/130 per min
- Number of strokes in manual mode: 45/50 per min
- Slide stroke adjustment: 10-105 mm
- Slide stroke: 70 mm
- Table surface: 800 x 630 mm
- Slide surface: 450 x 280 mm
- Throat depth: 315 mm
- Distance between table and slide: 335 mm
- Clearance between uprights: 355 mm
- Number of speeds: 2
- Motor speed: 730/1440 rpm
- Motor power: 4/7.5 kW
- Machine dimensions: 1425 x 1790 x 2550 mm
- Weight: 5850 kg
Technical condition: good.
Inspection and test run of the machine are possible.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Paskutinį kartą prisijungęs: Šiandien

Registruota nuo: 2016

25 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+48 509 7... skelbimai

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Vienos kolonos ekscentrinis presas SMERAL LEN 63C

Vokietija

6 514 km

Vienos kolonos ekscentrinis presas
SMERALLEN 63C

Skambinti

Sąlyga: naudotas, Gamybos metai: 1986, Technical details: Pressure: 63 t Hedpju N Dafofx Acusnu Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Approx. machine weight: 5.9 t Approx. machine dimensions LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with a tilting frame (25°) and combined single and stroke safeguard (overload protection). Available operating modes: Single stroke by foot pedal (slow/positioning mode) and/or by hand control (slow) Continuous stroke by foot pedal (slow and fast) and/or by hand control (slow and fast)

Peržiūrėti detales

mažas skelbimas

261 01, Česko

904 km

Ekscentrinis presas
SMERALLEN 63C

Skambinti

mažas skelbimas

Dvigubos kolonos ekscentrinis presas SMERAL LEN 63C

Vokietija

6 514 km

Dvigubos kolonos ekscentrinis presas
SMERALLEN 63C

Skambinti

Sąlyga: naudotas, Technical Details: Pressure: 63 t Throat depth: 315 mm Slide adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Strokes per minute: 71 - 140 spm Strokes per minute (single stroke): 45 / 50 spm Clearance between side frames: 355 mm Installation height: 335 mm Table: WxD: 800 x 630 mm Pass-through opening in table: 400 x 130 mm Clamping plate: WxD: 616 x 85 mm Ram clamping area: WxD: 450 x 280 mm Pin hole in the ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Weight of machine approx.: 5.9 t Control cabinet dimensions LxWxH: 0.86 x 0.30 x 1.3 m Machine dimensions approx. LxWxH: Press: 1.42 x 1.8 x 2.6 m High-Performance Press with Roller Feeder/Strip Line and Straightening Machine Application: suitable for series production Equipped with servo roller feeder MINI: tested until 01/2021 - Manufacturer: P/A GmbH, Type: SRF 220 - for strip width 220 mm - Feed rate: 150 m/min - Operation with hand-held unit Straightening System: - Manufacturer: Wanzke, Type KS 150 - Infeed width max. 200 mm - 2 powered infeed rollers - 4 driven straightening rollers (top), adjustable vertically approx. 30 mm - 5 driven straightening rollers (bottom), fixed, not adjustable Decoiler = Special design: - mechanical/manual Hnedpfxovt Nvpj Acuju - External diameter max. Ø 1,500 mm - Internal diameter max. Ø 300 mm - Width max. 200 mm Roller table: - Roller conveyor system with 9 roller rails, total 53 rollers (Ø 25x25 mm)

Peržiūrėti detales

Reklamuokite čia