Žirklinis keltuvas

SkyJack SJ4626 ELECTRIC, 10M WORKING HEIGHT, 454KG CAPACIT

Būklė: naujas, Ostas 3-Roller Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special Equipment Included in the Price: - Motorized adjustment of lower rollers - Hardened rollers - Motorized adjustment of rear rollers - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending sheet thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Nwodpfjg Nz T Iox Aqxsg Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor power: 4 kW Equipment: - Electrically driven upper and lower rollers - Swing-out upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark

Būklė: paruoštas naudoti (naudotas), Approx. 120 units = 480 linear meters of safety conductor rails Number of conductors/poles: 5 In standard lengths of: 4 m Busbar cross section: 10 mm² Nwjdpfx Aqed Hurbjxsg For mains voltage up to: 500 V Continuous current capacity (100% duty cycle): 60 A Weight per meter: 2.1 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (su dujų kolektoriumi) - Galia: 100-1100 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2020 2. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2015 (1 vnt.), 2013 (yra 2 vnt.) 3. WEISHAUPT WM-G10/2-A Modifikacija: ZM-LN Galia: 75-630 kW Pagaminimo metai: 2021 4. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 125-900 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2011 5. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2011 6. Nwodpfswgyrtex Aqxjg WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2009

Būklė: geras (naudotas), Riello RL50 oil burner Capacity: approx. 15 kg/h Viewing by prior telephone arrangement only! Preferential sale to dealers, businesses, or for export. All information provided without guarantee; errors and prior sale excepted. Nwodpfspiqipex Aqxeg The seller accepts no liability for typographical or data transmission errors. We can, of course, handle all necessary formalities. Loading available.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, keliamoji galia: 450 kg, kėlimo aukštis: 9 900 mm, tuščias svoris: 2 300 kg, kuro tipas: elektrinis, padang padangų: 70 procentas, pavaros būklė: 75 procentas, didžiausias leistinas svoris: 454 kg, SKYJACK SJ III 4632 scissor lift for sale in excellent condition. Personnel lift, workstation with extendable platform. Manufacturer: Skyjack Year of manufacture: 2011 Load capacity: 454 kg Working height: 11.7 m Platform height (raised): 9.7 m Overall width: 1.9 m Overall length: 2.3 m Gross weight: 2300 kg Non-marking tires Operating hours: 374 Nwjdpsugtliefx Aqxjg TROJAN MOTIVE batteries in good condition. Built-in battery charger.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Įranga: avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, grūdinti volai, kojinis nuotolinio valdymo pultas, kūginio lenkimo įrenginys, pasukamas viršutinis volas, DAVI lakštų lankstymo staklės Nedpfx Aqoy Emtnsxowg Volelių skersmuo: 180 mm Valcavimo ilgis iki 3 m Storis iki 15 mm

Būklė: geras (naudotas), rida: 347 000 km, galia: 265 kW (360,30 AG), pirmoji registracija: 03/2004, kuro tipas: dyzelinas, ašių konfigūracija: 6x4, kuras: dyzelinas, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 3, pakaba: oras, krovimo vietos ilgis: 6 300 mm, Gamybos metai: 2004, Įranga: kranas,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1993, valdymo tipas: vadovas, automatizacijos lygis: vadovas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 300 mm, šoninio volelio skersmuo: 280 mm, volelio skersmuo: 400 mm, vėjo ilgis: 4 050 mm, darbinis plotis: 4 000 mm, darbinio aukščio: 1 100 mm, maks. lakšto storis: 8 mm, plieno lakšto storis (maks.): 8 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, bendras svoris: 11 000 kg, bendras ilgis: 6 000 mm, bendras plotis: 1 450 mm, bendras aukštis: 1 510 mm, galia: 11,03 kW (15,00 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, 3 ritinėlių 4000x8 mm plokščių lankstymo staklės su pirminiu prilaikymu Modelis: Famar CPI4/6 TECHNINIAI DUOMENYS Plokštės plotis: 4000 mm Plokštės storis: 8 mm Pirminis lankstymas: 6 mm --- Naudinga ritinėlių darbinė zona: 4050 mm Viršutinio ritinėlio skersmuo: 300 mm Šoninių ritinėlių skersmuo: 280 mm 3 ritinėlių paviršius grūdintas Lankstymo ritinėlių padėties indikacija Priekinis hidraulinis segmento atidarymas — uždarytos kiauto iškrovimui Pailgintos ašys, skirtos papildomiems profilio lankstymo ritinėliams montuoti Kintamas valcavimo greitis iki 5 m/min Elektrinis variklis: 15 AG hidraulinei sistemai Galia: 15AG, 380V/50Hz Apsaugos įrenginiai su avariniu stabdžiu Nwedpfxsxnmb Is Aqxjg Matmenys: 6000x1450 x H1510 mm Svoris: 11 tonų

Gamybos metai: 2020, būklė: naudotas, New: Yes Unladen weight: 412 kg Working width: 175 cm Nedpfx Aqox I Hfcexswg

Būklė: labai geros būklės (naudotas), Epson G10-854SR Robot Assembly and Dispensing Station The assembly station is divided into the following subsections: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heat sink, SW = front wall angle) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards enters the dispensing area via the transfer belt. - The WT is stopped at the lift-positioning unit (HuPo), lifted off the conveyor, and fixed in place. - The x-y-z handling system moves the dispensing head to the preset location and starts the dispensing process. - After successful dispensing, the handling returns to the rest position, and the WT is placed back onto the conveyor. - The WT is then transported to the KK+SW assembly area (provided no WT is in the assembly position). St.3.2: Assembly Area KK+SW - A WT is transported from the dispensing area into the KK+SW assembly area via the transfer belt. - The WT is stopped at the lift-positioning unit (HuPo), lifted and fixed in place. The chassis side walls of the partially assembled unit are aligned. - Simultaneously, the KK tray and SW tray are positioned. - A KK tray stack (12 units) as well as an SW tray stack (12 units) are manually placed on the respective infeed belts outside the safety enclosure. - The two safety shutters are opened and the loaded tray stacks move to the gripping position of each stacker. - The two safety shutters are closed. - The respective grippers pick up the corresponding tray. - Using the z-axis, the trays are singularized and transported upwards (above the actual removal height). - For centering and tray stabilization, a centering support is positioned under each tray using the x-handling. Nedpfjibx S Nox Aqxewg - The stacker z-axis places each tray on the corresponding centering support. - The trays are now ready for component removal. - The SCARA robot’s multi-gripper picks and places the KK from the tray in an intermediate position for alignment (to ensure an exact gripping position for assembly, correcting inaccuracies from the pickup). - The KK is scanned. If the scanner result is OK, the KK is regripped and mounted on the WT. If not OK, it is placed in an NG (not good) box. - The SCARA’s multi-gripper then picks the SW from the tray and places it in the alignment position. - SW is regripped and mounted on the WT. - Process continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. working range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Installation type: Ceiling mount IP protection rating: IP20 Power and signal cable: 3m Financing through our bank is also possible. complete-concept.leasingo.de