Kampinis suvirinimo aparatas

Siegelgerät L Siegelgerät (2012)

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Heidelberg Dymatrix 113 CSB Pro – COMPLETELY OVERHAULED Machine type: Embossing and Die-cutting System / Automatic Sheet Die-cutter Machine number: 400018 Year of manufacture: 2004 Technical Data Max. strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Max. width: approx. 2,400 mm Max. height: approx. 3,200 mm Max. height with open window: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Feeder W4 weight: approx. 3,000 kg Internal chase dimensions: 820 x 1,134 mm Max. die-cutting forme size: 816 x 1,130 mm Max. die-cutting area: 800 x 1,120 mm with gripper margin Adjustable gripper margin from: Standard 11–17 mm with 13 mm wood before first knife, Option 8–14 mm with 10 mm wood before first knife Cutting rule height: 23.8 mm Feeder stack height including pallet: max. 2,000 mm Delivery stack height including pallet: max. 1,700 mm Max. feeder stack weight: 1,000 kg Max. delivery stack weight: 1,000 kg Feeder residual stack height: max. 450 mm Feeder residual stack weight: max. 450 kg Delivery auxiliary stack height: max. 200 mm Delivery auxiliary stack weight: 200 kg Pallet Sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Fpodpfxov T T N Hs Ab Sob Delivery: max. 800 x 1,200 mm (EURO pallet) Pallet height: max. 170 mm Drive and Power Supply The machine is driven by a frequency-controlled motor via a flywheel. Between the flywheel and the machine is a pneumatic clutch with spring-loaded brake, used to engage and disengage the machine. The motor runs continuously. The control cabinet located with the machine contains, with few exceptions, all switching devices for the die-cutter and feeder. Command and signal devices are located at the machine, distributed as required across the control panels. Control Cabinet Features: Main supply, main switch, fuses, motor protection device, PLC control Connection values: 3-phase 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories included. Patented chain guide rails from QTM have already been retrofitted. Price: On request

Sąlyga: geras (naudotas), Shrink tunnel from a German manufacturer: Fpsdpsh U A I Rjfx Ab Sjb - Tunnel opening approx. 500 x 200 mm. - Temperature adjustable up to 250°C and conveyor speed adjustable up to 25 m/min. - Option of fixed or rotating middle tunnel rods. - The hot air flow can be adjusted separately at the top and center via deflection plates. - Bottom air flow can be switched on separately. - The machine can be moved or secured in place using lockable castors.

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 700571/99-280108, Max. working width (mm): 660 Fpedpfxoixqb So Ab Sjb

Sąlyga: naujas, Gamybos metai: 2025, Powder Coating Oven Working Dimensions (mm): 1200 (W) x 1500 (D) x 1800 (H) Nwrin Fsdpfx Ashg Ty Isb Sopb Technical Data: • Power Consumption: 20 kW • Maximum Operating Temperature: 230°C Equipment: • Internal trolley • External cart • Convection heating (uniform temperature throughout the oven) • Safe opening and closing locks CHOOSE BUMEX SP. Z O.O. High-quality machines among those available on the market Professional consulting and service Warranty included Warranty and post-warranty service Complete technical documentation 100% customer satisfaction All BUMEX SP. Z O.O. products are CE-certified We offer our own transport—prices are specified individually for each offer. We issue invoices with VAT shown separately. Short delivery times! Option to order machines in various, custom configurations and sizes! Please contact us.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, perforavimo jėga: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for punching out inner waste as well as lateral and rear sheet edges ⦁ for stacking the die-cut and stripped sheets in pile form with the attached gripper edges or ⦁ for separating the gripper edges and then stacking the remaining sheets in piles ⦁ with a patented gripper car registration system for maximum register accuracy ⦁ with a batch stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, which does not require retooling even for the smallest cut sizes (changeover table with comb structure) ⦁ separator sheet magazine with electronic level monitoring, refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device at delivery Specification: Max. sheet size: 760 x 1060 mm Min. sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 gsm Cardboard up to 2000 gsm Corrugated board up to 3 mm (max. sheet curl 4%) Fedpfx Asww E Nreb Sepb Equipment: Optical sheet register (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at delivery incl. operator platform quick-lock frames in all tooling stations

Gamybos metai: 1990, Sąlyga: geras (naudotas),

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Bis zu 400 °C (Leistung 33 kW) Vorheizen / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturenprogrammierung. Abgedeckte Führungsbahnen (DGP) für hohe Langzeitpräzision. Direktantrieb vom Motor zur Hauptspindel für ruhigen Lauf. Umlaufschmiereinheit mit Filterung zur Schmierung des Präzisionshauptspindellagers. Kombinierte Steuereinheit für wirtschaftlich vorteilhafte Programmierung und Maschinenbedienung sowie optimalen Zugang zum Arbeitsbereich. Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg Fsdpouqkwfjfx Ab Sjpb

Gamybos metai: 2020, Sąlyga: naujas, Ovens for the polymerization of powder coatings are designed for heating elements coated with powder paint. Heating is achieved through continuous air circulation forced by the fan assembly. During the heating process, the powder melts and forms a homogeneous coating layer on the object's surface, which adheres well to the substrate. Fedpfxjfy T H Ie Ab Sepb Ventilated ovens – dryers can be used for drying metal items after degreasing or etching. Consistent temperature control and a wide variety of settings during powder fusion make the dryer suitable for any type of powder paint. 7" Touch Panel The large color touch panel is aesthetically pleasing and is comfortable and intuitive to operate. You can set all key parameters directly on it. Memory for 20 programs with 10 events each It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature steps, sequenced within the heating curve. This is especially necessary for more demanding processes. Energy consumption data Consumption is calculated based on the burner settings. This feature allows you to estimate cycle costs, plan energy usage, and monitor staff. Dual-channel USB cycle parameter recorder Each oven is equipped with a recorder that stores all ignition parameters—including two temperature channels—on a USB stick, similar to an aircraft black box. The system also enables the analysis of monthly/daily reports, covering media consumption and performance. Every heating start, even opening the door, is recorded and can be reviewed years later. Such a dedicated option is not offered by any other manufacturer; this system was developed from scratch by our engineers. Automatic oven start at 6 AM How often have you waited after hours for the cycle to finish? If you’ve run a paint shop for a while, you know the struggle. Our solution allows you to leave the cycle unfinished at the end of your shift, so it completes automatically by the time you arrive the next morning. Developed by professionals for professionals. Countdown to cycle completion The cycle has started, but how much time is left? By calculating the heating dynamics, the system computes and displays the remaining time on the screen. Automatic flue gas exhaust The chimney can be programmed to open a few minutes before the end of the firing process to vent the chamber. It can be remotely controlled via the control panel, unlike most systems that require manual mechanical operation. Self-closing door Simply pull the door to open. The lock has an adjustable door pressure. To close, just push it; the lock catches the door and automatically pulls it shut. ThPID Control System The ThPID system is designed to overcome the inertia effect known as hysteresis. The standard solution operates on an on/off principle with constant power. ThPID controls the heating output using voltage regulation: once the set temperature is reached, it delivers only the required heating power to minimize temperature fluctuations. The ThPID system also allows the oven's heating power to be limited to a pre-set percentage value...

Gamybos metai: 2005, Sąlyga: geras (naudotas), Maišyklė maistui Techmar 500 litrų Gamintojas: Techmar Metai: 2005 Talpa: 500 litrų Maitinimas: 1,6 kW Fsdpfx Aeuccyneb Sspb Įrenginio matmenys (I x P x A): 1.500 x 1.250 x 2.100 mm Svoris: 250 kg.

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The universally deployable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is now indispensable in many industries. Fpjdpfx Absu Smd Ej Ssb The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and minimal programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined areas. It is also possible to use a handheld scanner. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also possible. Made in Germany Fiber laser 30 W, 20 W or 50 W • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: autofocus system – system for automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus setting) • Signal light for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard holder • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg