Keturių pusių obliavimo staklės SCM Superset NT 2009

SCM Superset NT

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 40 m/min, darbinis plotis: 240 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 40 mm, bendras svoris: 4 000 kg, padavimo variklio galia: 4 000 W, Siūlome šį labai gerai išlaikytą SCM superset nt obliavimo ir profiliavimo automatą, pagamintą 2022 metais. Ksdpfx Asyapi Hjf Isll

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 Ksdpsw Nbacofx Af Ijll - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Kledpfx Afewwl Nls Iol Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Sąlyga: paruoštas naudoti (naudotas), working width: 240 mm Kljdpfx Aew Afguef Ijl working height: 120 mm 6 heads head arrangement: bottom/right/left/top/top/bottom spindle speed: 6000 rpm – last two 8300 rpm two-axis spindle adjustment spindle diameter: 40 mm electric planing height adjustment variable feed speed control pneumatic feed roller pressure

Sąlyga: geras (naudotas), Gamybos metai: 2019, Weinig Conturex Greenline Plus CNC Fensterfertigungsmaschine Beschreibung: Baujahr: 2019 Werkstücklänge (Bearbeitung): 4500 mm Automatische Teilekontrolle im Einlaufbereich Spannbackeneinstellung in Verbindung mit Falzspannern Hauptmotor 30 kW, indirekter Antrieb Unispindel für Schlitz-, Bohr- und Sonderbearbeitungen Werkzeugwechsler mit 35 und 17 Plätzen HSK 63F Werkzeugaufnahme Spezielle Software zur Maschinen- und Betriebsdatenerfassung Pufferlänge Zu-/Ablauf: 2000 / 2500 mm Optionaler Werkzeugsatz/Plan verfügbar Kledow N Nixjpfx Af Ijl Vollständige Beschreibung auf Anfrage (Trotz größter Sorgfalt bleiben technische Änderungen, Irrtümer sowie Preis- und Angabenänderungen vorbehalten. Für Druckfehler wird keine Haftung übernommen! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise zzgl. Inserierungskosten Machineseeker / Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden Holland

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AA2/004283, darbinis plotis: 240 mm, TECHNICAL DETAILS Klsdpfjwkq Ndox Af Isl Max. planing width: 240 mm Cutterhead diameter: 120 mm Number of knives: 4 Electrical Data Voltage: 400 V Connected load: 10 kVA General Information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available - CE marking present

Sąlyga: paruoštas naudoti (naudotas), working width: 240 mm working height: 150 mm number of heads: 5 head arrangement: bottom/right/left/top/bottom spindle speed: 6000 rpm spindle diameter: 40 mm minimum head size: 100 mm maximum head size: 200 mm motor power: 3x 5.5 kW; 2x 4 kW; 2.2 kW pneumatically pressed rollers year of manufacture: 2010 Klsdpfx Ajw Aflqjf Iol

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Profimat 23 E Darbinis plotis: 260 mm, Darbinis aukštis: 170 mm, 5 velenai, Veleno skersmuo: 40 mm, Velenų išdėstymas: Klsdpfsvgnb Rox Af Iol 1- Apačia – 5,5 kW 2- Dešinė + 3- Kairė – 11 kW 4- Viršus – 5,5 kW 5- Apačia – 11 kW Padavimo greitis: 6 – 24 m/min - 4 kW Oro pagalvė stalo viduje Viena varoma ritinėlis išėjimo stalo dalyje. Su įrankiais.

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Klodoxl Ha Sepfx Af Iol Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Sąlyga: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Klodot Hw Iiopfx Af Isl Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice