Keturių pusių obliavimo staklės SCM Sintex NT 2008

SCM Sintex NT

Sąlyga: naudotas, Planer and profiling moulder WEINIG Profimat 26 Super Ijdpfxjwqda Nj Af Iotb Working width: 20 – 230 mm (260 mm) Working height: 8 – 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle 4 kW / Left & right 7.5 kW / Top 5.5 kW / Bottom finishing 5.5 kW Pneumatic pressure for feed rollers Stepless cardan feed 5 – 24 m/min Feed roller before jointer Control via push button panel Automatic lubrication pump Mechanical digital readouts Machine in CE-compliant version Year of manufacture: 2001 Without machining tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration in the exhibition center Ex stock Lieboch

Gamybos metai: 1980, Sąlyga: geras (naudotas), Gubisch Planing and Moulding Machine 172/7 S/N 3425 80 Year of manufacture: 1980 Length of jointer table: 1950 mm Itedpfxogrmymj Af Iob Maximum planing width: 170 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 7 planing spindles: 1. Bottom surfacing spindle 7.5 kW 2. Right side jointing spindle 3.0 kW 3. Left side spindle 4.0 kW 4. Right side spindle 4.0 kW 5. Top thicknessing spindle 4.0 kW 6. Top thicknessing spindle 5.5 kW 6. Universal spindle top/bottom 3.0 kW Voltage: 380 V, 50 Hz Power consumption: 33.6 kW Feed motor: 1.5 kW Feed speed infinitely variable: 5 – 30 m/min Weight: 3,300 kg Dimensions (L x W x H): 4,800 mm x 1,400 mm x 1,850 mm Technical data subject to change.

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Ijdpfx Afewgwmno Istb Siemens IE3 motor with f...

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 180 mm, pjovimo plotis (maks.): 150 mm, pjūklo disko skersmuo: 550 mm, galia: 7,5 kW (10,20 AG), We are selling 1 x JRIMAC under-table crosscut saw UKS 450 Cross-section capacities: 40x440 - 100x340mm - 160x120mm Ijdorfudnopfx Af Ietb Maximum cutting height: 170mm Saw blade: 550mm Working height: 850mm Extraction ports above and below: 160mm - Continuously adjustable pneumatic feed - Hydraulic brake cylinder for consistent feed speed - Pneumatically operated workpiece clamping device - Two-hand control for cut initiation, with safety guard - Roller conveyors and stop systems available on request

Sąlyga: naudotas, Number of spindles: 5 pcs. Working width: 20 - 230 mm Planing height: 8 - 120 mm Length of jointer table: 2000 mm Feed motor: 1.1 kW Feed speed steplessly adjustable: 2 - 12 m/min 1 WEINIG Planing and Moulding Machine VARIOMAT incl. multifunction/slotting table ----- Machine will be cleaned and functionally tested before delivery Technical Manufacturer's Description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125 - 145 mm Axial adjustment: 5 mm Isdpowugpbefx Af Ietb Rabbetting device incl. rebate cutter MarathonCoating for table insert before and after 1st bottom spindle 2nd spindle vertical right ----- Motor with brake: 11 kW Shared motor with left vertical spindle Diameter: 40 mm Speed electronically adjustable: 3000 - 6000 rpm (for 11 kW/15 HP) Tool circle for longitudinal machining: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profile depth: 45 mm Axial adjustment: 30 mm Insert segment incl. additional fence lip 125 mm Insert segment incl. additional fence lip 150 mm 3rd spindle vertical left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holding system Shared speed with right vertical spindle Tool circle for longitudinal machining: 93-232 mm Maximum profile depth: 45 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment under table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 30 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment: 30 mm Glazing bead discharge after top spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 15 mm Axial adjustment: 10 mm Machine operation ----- Both axes of all spindles—except the 1st lower spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital readout of feed, together with pressure ahead of the top spindle. Pressure after the top spindle adjustable separately. Memory function ----- For storing the setting values of profiles Tool holding axes and pressure elements before and after the top tool holder with electronic dual displays: Function: - Saves the setting values of the machined profile at the touch of a button under a profile number - Upon reselecting the profile number, the electronic dual displays indicate the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory slots 3 axially CNC-controlled adjustment and positioning of the spindles in combination with memory function. For spindles no. 2, 3, 4 3 radially CNC-controlled adjustment and posit...

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, TECHNICAL SPECIFICATIONS: - Cutting width: 250 mm - Cutting height: 120 mm - Capacity: up to 8,150 linear meters / 8 hours - Sorting table with 4 ejectors - Electronics: Controller with color touch display “MITSUBISHI” - Functions: full optimization for 30 dimensions in two quality classes - Creation of cutting programs for various customers - Cutting at marking point (fluorescent chalk marking) - Trim cutting (beginning and end of incoming material) - Batch cutting (multiple elements at once) - Counters: meters, total, shift, operator, monthly - Cutting accuracy: ±0.2 mm - Motor: 5.5 kW (saw Ø500 – 140 teeth) - Input material width range: 12 - 250 mm, max width/height (250 / 50 mm) - Input material height range: 12 - 120 mm, max height/width (120 / 130 mm) - Input material length: up to 4,200 mm - Lubrication: Oil-based central lubrication system - Output automation: Connection for angled conveyor and sorting table Iodjwp Az Aspfx Af Ietb

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, ACTION M Rahmenpresse Iodpfxswh T Dlo Af Ietb Presse für alle Arten von Fenstersystemen: Fenster, Klappläden, Fensterläden und Massivholztüren. Maximale Arbeitsmaße L x H: 3500 x 2500 mm Minimale Arbeitsmaße L x H: 250 x 375 mm Max. Vertikal-/Horizontalpresskraft: 7,4/2 t Arbeitshöhe: 480/1050 mm Leistung der Hydraulikpumpe: 2,1 kW MASCHINENZUSAMMENSETZUNG: ACTION M Rahmenpresse: Stück 1 109831 CE-Norm gemäß SM: 1 R00494 action m 35-25: 1 930731 Spannung 400 V, EU: 1 931201 Frequenz 50 Hz: 1 530074 Arbeitsflächen aus PVC-beschichteten Trägern: 1 530075 Manuell verstellbarer Zwischenbalken komplett mit Kolben und Gegenanschlag: 1 530076 Hydraulikanlage für Niederdruckbetrieb: 1 530077 Ausrüstung für trapezförmige Werkstücke mit schwenkbarem Kopf zur Anpassung an unterschiedliche Ecken des Fenstersystems: 1

Sąlyga: geras (naudotas), Codice: 0424 Marca: DMC - ITALIA Modello: EUROPA 120 Calibratrice levigatrice automatica a 2 nastri per legno, mobili, arredamento, telai in legno, porte, pannelli, materiali compositi e vari. Dati tecnici: Struttura robusta Larghezza massima di lavoro mm 1200 Altezza massima di lavoro mm 170 Dimensioni nastro abrasivo mm 2200 x 1250 Iedpfx Afov A Ta Dj Istb 1° Gruppo: Rullo di calibrazione in gomma - Diametro mm 220 - Staffe pressapezzo regolabili - Motore Hp 20 2° Gruppo: Tampone di finitura con pressione regolabile - Motore Hp 10 Soffiatori per la pulizia del nastro abrasivo Variatore di velocità avanzamento nastro da 3,5 a 17,5 mt/min Tavola a vuoto - Motore Hp 7,5 Sollevamento tavola automatico Posizionamento tavola automatico N° 2 bocche di aspirazione diametro mm 200 Pressione di lavoro 7 bar Dimensioni di ingombro mm 1900 x 1800 x 2100 h Peso kg 2500

Sąlyga: geras (naudotas), Gamybos metai: 2007, hydraulic frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Delivery Terms Self-collection Shipping Cost Negotiable Commissioning Type Negotiable Description Notes Working area 3500 x 2300 mm, pressure 1000 kg (daN), hydraulic unit motor 2.2 kW, length 3500 mm, height 2300 mm, weight 2000 kg, hydraulic unit Itedpfx Asdntc Nef Iob

Sąlyga: geras (naudotas), Gamybos metai: 1982, WEINIG Four-Sided Planer, PM 17, 5 Spindles Itodpfx Asicbhvef Ijb Machine No.: 1329-2356 Year of manufacture: 1982 Working width: 170 mm Planing height: 120 mm 5 spindles: Max. tool length: 180 mm, 130 mm Infeed table length: 2000 mm with cutter heads 6 spindle arrangement: 1. bottom – 4 kW 2. right – 3 kW 3. left – 5.5 kW 4. top – 5.5 kW 5. bottom – 4 kW / universal Spindle diameter: approx. 35 mm Feed speed: 6.5 – 49 m/min Manual lubrication pump Including 5 tools for all heads Dimensions: 4500 mm x 1300 mm x H 1500 mm Weight: approx. 3800 kg Technical specifications subject to confirmation