Šlifuoklis SCM SANDYA 3S RCS 950

SCM SANDYA 3S RCS 950

Sąlyga: naujas, Technical data: Gjdpfx Abogtm U Asdsbg Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Sąlyga: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Gedpfx Aoxqggcobdobg Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Sąlyga: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, bendras plotis: 400 mm, galia: 26 kW (35,35 AG), TECHNINIAI DUOMENYS Didžiausias darbo plotis: 400 mm Darbo aukštis: 2 - 150 mm Minimalus ruošinio ilgis: 150 mm Gbodpfow Thpfex Abdog Darbo stalo aukštis: 900 mm Elektros varikliai: Plonų lakštų obliavimo variklio galia: 22,0 kW Pavaros variklis: 3,0 kW Kėlimo variklis: 0,50 kW Įrankis: Rotoriaus sūkių skaičius: Su reguliuojamu pavaros greičiu: 2.100–3.000 aps./min Peilių skaičius: 48 vnt.

Sąlyga: naujas, Technical specifications: Gedeg A D Anopfx Abdsbg Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Sąlyga: naudotas, SCM Sandya 600 RCS 110 Plati juostos kalibravimo ir smulkaus šlifavimo automatas Reiklus šlifavimo centras kalibravimui, masyvinės medienos ir faneros smulkiajam šlifavimui Aukščiausia komplektacija 1. Kalibravimo šlifavimo agregatas su RA įstrižai briaunuotu plieniniu kontaktiniu volu 2. Kombinuotas šlifavimo agregatas su kontaktiniu voleliu, 140 mm skersmens, 85 Shore kietumo, elastinga segmentinė šlifavimo bato sistema su elektroniniu sektorių valdymu Darbinis plotis: 1100 mm Pagrindinio variklio galia: 15 kW Vykdymas „B“ RCS modeliui MESAR elastingas segmentinis šlifavimo batas Elektroninė programavimo sistema „LOGIC SC“ su ekrano valdymu Elektrinis darbinio aukščio reguliavimas su automatiniu ruošinių atpažinimu Gedpfx Aboxtan Sodebg Įdėjimo/išėmimo ritininis stalas ilgiems ruošiniams Staklės iš mažo amatininkų verslo / LEASINGO GRĄŽINIMAS Pirmas pristatymas 2017 Sandėlyje Lieboch / Galimas lizingas

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations Gbodpfx Aexnldbsbdsg - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Gbjdpfecnw U Rex Abdeg Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Kompaktiška EDGETEQ serijos briaunų laminavimo mašina, skirta mažoms meistrų dirbtuvėms, su galimybe automatizuoti agregatus. Pagrindinė komplektacija (2020): Valdymas easyTouch Sujungimo frezavimo agregatas Klijų užnešimo agregatas + 1 atsarginė klijų talpa Pjovimo pjūklas, dvigubas variklis, pneumat. reguliuojamas Frezavimo agregatas su rankiniu reguliavimu ties lygiais, pluoštiniais, radiusiniais kampais Forminis frezavimo/briaučių apvalinimo agregatas Profilio gremžtukas, pneumat. reguliuojamas Plokštuminis gremžtukas Poliravimo agregatas Techniniai duomenys (2020): Mašinos ilgis [mm]: 4.153 Ruoninuko plotis Ruoninuko storis 8 - 22 [mm]: 70 Ruoninuko storis 23 - 50 [mm]: 120 Ruoninuko storis 41 - 60 [mm]: 150 Ruoninuko storis [mm]: 8 - 50 (opcija 8 - 60) Briaunos storis [mm]: 0,4 - 3 Padavimo greitis [m/min]: 11 Gbjdpfx Absw Tcpmodeg

Sąlyga: naudotas, Gamybos metai: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt roller, 2nd belt pad - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Sanding pad width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Feed conveyor with infinitely variable speed adjustment: 4–20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation “Eco Gear Patent System” - 1 pcs. drum brake for belt stop - Pivoting roller for belt tension - 3 pcs. pressure rollers with rubber coating - Emergency stop bar at infeed Gedpew E Ty Uofx Abdobg - Electronic workpiece thickness display - 2 pcs. roller conveyors, each with 2 rollers at infeed and outfeed - 1 extraction nozzle Ø 160 mm - Automatic table positioning - New patented belt oscillation system - No valves - No light barriers - Not sensitive to dust - Energy-saving, environmentally friendly system - Since 2008, the machine model with this system has been operating continuously without lateral belt run-off! - Incl. Unitek belt motor 14.7 kW instead of 11 kW (Promoter) - Incl. Unitek pneumatic sanding pad with control synchronized to feed speed Availability: short-term Location: Saxony-Anhalt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, I am selling a wide belt sander SCM Sandya 16 S 110, year of manufacture 2012. Configuration: - 18.5 kW hard rubber sanding roller - 15 kW hard rubber sanding roller - 11 kW combination unit with soft rubber roller and pneumatic shoe - Working width: 1100 mm - Feed rollers for short workpieces - Compressed air cleaning for all units - Total weight: 2750 kg - 3 motors: 18.5 + 15 + 11 kW Godpeihfawefx Abdebg - Complete documentation included Condition: LIKE NEW! The machine has seen very little use. Available immediately.