Briaunų apklijavimo mašina

SCM Olimpic K 800

Sąlyga: geras (naudotas), Gamybos metai: 2016, veikimo valandos: 16 977 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 140 mm, padavimo eiga Y ašimi: 50 mm, X ašies padavimo greitis: 18 m/min, briaunos storis (maks.): 3 mm, bendras ilgis: 6 000 mm, ruošinio aukštis (maks.): 60 mm, bendras svoris: 3 000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 Djdpfx Ajxxy Rkjdmjwf Nsc Texxy Rkofm N Rvjdd 2 glue tanks + 1 glue tank for spare parts

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007134, Taikomo krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: EVA, karštas oras Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Viršutinis frezavimo agregatas: taip Dwjdpfx Adet Hmtzjmof Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbo agregatų skaičius: 10 vnt.

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Dwsdpfxoxlqntj Admof Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63

Sąlyga: geras (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 12 mm, Industrial range edge bander OLIMPIC (SCM Group) with comprehensive equipment suitable for both custom and series production. The machine is fitted with servo-driven units (ABS R1+R2mm + thin edge + edging strip). Model: Olimpic K800 TERL Manufacturer: SCM Group Year of manufacture: 2015 Machine condition: good Total edge-banding meters: 238,800 m Main technical specifications: - Feed speed: 12/18 m/min (including corner rounding) - Workpiece thickness: 10–60 mm (including corner rounding) Equipment and machine configuration: - Control panel with STARTOUCH touchscreen - Internal lighting of working zone - Automatic lubrication of feed belt - Electronic positioning of top pressure beam - Quick-change glue pot system Working units: - Anti-adhesive spray - Pre-milling unit (2x DIA cutters, dia. 100 mm) - Glue pot "VC/1000" (quick-change system) - Pressure rollers (4 pcs) with timed engagement - 2-motor end cutting unit "K/SEL" with pneumatic disc tilting - Radius trimming units "RI/800" R1mm + thin edge + edging strip (max. 12 mm) (including 3-position pneumatic kit) - 2-motor corner rounding "ROUND K MULTI-EDGE" R2mm + thin edge (each motor features 1 electronic axis with servo motor) - Radius scrapers "RAS/S 2P" MULTI-EDGE R1+R2mm (each scraper equipped with 2 electronic axes and servo motors) Dwjdpfjwxt Tbex Admef - Cleaning spray - Flat scrapers "RCA/2C" - Brushes "SP"

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 Djdpfx Adjd Nuu Hsmowf End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Variklis 7,35 kW 5 apsukų dažniai 3500-10000 min–1 Frezavimo veleno pakreipimas 0-45° Stumdomo stalo ilgis 1300 mm Elektrinis aukščio ir pokrypio reguliavimas Elektriškai reguliuojamas frezavimo tvorelės Frezavimo tvorelė visiškai atlenkiama Maks. įrankio skersmuo 250 mm Atraminiai žioteliai aliuminis 550 mm Dodpfx Adjxbq Ulsmewf Centrex frezavimo apsauga Svoris apie 700 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008018, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA, PUR Sujungimo frezavimas: taip Dwsdpfxjwv Dfcs Admef Multifunkcinis agregatas: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt.

Sąlyga: naujas, Gamybos metai: 2025, Įvairūs klijų bakai kraštų juostoms ir kraštų juostavimo mašinų keturkampiams apdirbimui. Tiekiame naujus klijų bakus arba remontuojame jūsų naudotus. Taip pat parduodame atskiras atsargines dalis. Dwsdjf Tc Rqjpfx Admef SCM, Stefani, IDM, IMA, Biesse

Sąlyga: naudotas, Holz Her STREAMER 1054 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for precise trimming before gluing station Fully automatic edge magazine for rolls and strips Glue application station GLU-JET for cartridges and PUR bonding Glue application via nozzle technology Workpiece height: 6 - 60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1 roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness With pneumatic adjustment of end saw angle from 0-10° Dedpfx Adexu E Nwjmjwf Pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic control via operator panel Scraper unit for chamfers and radii with 2 scraper holders Pneumatic infeed and outfeed Flat scraper unit - finish Spraying device - PUR Machine is FULLY WORKSHOP OVERHAULED and in EXCELLENT CONDITION.

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service Djdpfx Aevvkfdedmjwf - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height