Skydo pjūklas

SCM Gabbiani A3 130

Būklė: naujas, Gamybos metai: 2023, Klijų šukos Danties forma 10 mm Klijų šukos Danties forma 15 mm Klijų šukos Danties forma 20 mm Ljdpfjiacbpox Acperk Pleištinių dantų profilis Klijų padengimo šukos Klijų užnešimo šukos Klijų šukos Klijų šukos (dgs.) >>Pristatymo laikas iš sandėlio

Būklė: naujas, Technical data: Max saw blade diameter: 400 mm Min saw blade diameter: 250 mm Saw blade spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring blade spindle diameter: 20 mm Scoring unit with separate motor Manual saw blade height adjustment Lrjdpfsv S Uz Iox Acpok Tilting saw blade from 0° to 45° Manual saw blade angle adjustment Carriage length: 3200 mm Carriage lock Worktable: 1450 mm x 1030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 007687, Type of attached edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing milling: yes Multi-functional unit: yes Maximum feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs Ljdpfx Acewuz Npopork

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), pjūklo disko skersmuo: 305 mm, bendras ilgis: 3 100 mm, bendras plotis: 3 100 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 100 mm, pjovimo aukštis su įrėžėju (maks.): 70 mm, X ašies padavimo greitis: 40 m/min, padavimo greitis Z ašis: 50 m/min, vietos reikalavimas ilgis: 3 100 mm, reikalingas plotis: 3 100 mm, Įranga: dozatorius, sūkių greitis be galo kintamas, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Technical Main Data & Equipment: Longitudinal saw FM 20-3100 with hardened guides Automatic forward and return stroke of the saw unit (return stroke automatically lowered) Feed drive via three-phase geared motor, frequency inverter-controlled Feed speed: 2 – 40 m/min (infinitely variable) Return speed (rapid traverse): 50 m/min Extraction channels in machine base & pressure beam Score saw adjustable externally (without opening the hood) Protective hood interlock with lamella curtain SZ 5008 3-stage cutting height adjustment LA 4143 6 recesses in the pressure beam for offcuts up to 5 mm Saw motor: 7.0 kW | Scorer motor: 1.1 kW (can be switched off) Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: Angle pressure device WP 5003 with hold-down claw for crosscuts Adjustment range: 2400 mm Fully automatic control via DNC-AT Material infeed table HP 5091 2 top-mounted guides, rack-and-pinion guide Servo drive material pusher Feed speed: 25 m/min (safety limited) Return: 40 m/min 6 clamping fingers, 4 double roller tracks Table length: 3100 mm | Gauge depth: 3150 mm Closed Pertinax surface in the angle stop area Control & Operation: Operating system: Ubuntu Linux Integrated PC with hard drive, parallel & serial interface Network capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) USB print function Multilingual dialog programming 15" flat screen, multifunction keyboard in swiveling control panel Graphical display of cutting patterns and processes Software / Programs: OPTIMAX: Office optimization, offcut calculation, material requirements Lsdpfx Acewrn Efspjrk OPTIMIN: Direct optimization at the machine PC with parts list entry Processing via USB, floppy disk, or online (optional) Manual, automatic, & special operating modes (e.g., grooving, veneered parts) Additional Equipment: Angle stop table HP 5085: 1,720 x 800 mm | Pertinax overlay Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay Air cushion system LK 5030 integrated in both tables Circular saw blade KSB 4005: Ø 305 mm, Z = 60 Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and endurance. Warranty: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine construction and guideways. (Excludes electrical supply parts and wear parts.) 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Gamybos metai: 2002, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Bębnowa suszarnia do trocin i zrębków drzewnych o wydajności do 15 t/h. Lodpfovx S Hnsx Acpjrk Stan - w pełni sprawna.

Būklė: naujas, MAIN FEATURES OF THE MACHINE: Ljdpfxjp Ecdgo Acpork -Single-head drilling machine for drilling within a 0° - 90° range -Pneumatically adjustable head tilt -Cast iron fences -Spindles equipped with quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -Accurate drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium guides (right and left) with two stops -Five quick-release clamps Technical specifications: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic clamps: 2 Distance between spindle centres: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Operating pressure: 6 - 7 bar Speed: 2,800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1,030 mm Width: 1,030 mm Height: 1,285 mm

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Lrodpfx Acoxy Tmnspek Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Naudota kraštų laminavimo staklė SCM - Modelis: Olimpic K360 T-ER1 Lrjdpfx Aceyrr Naspek - Labai gera būklė. - Prieinama iš karto - Vaizdo įrašas pagal užklausą - Pagaminimo metai: 2016 - Aukšta komplektacija (2 papildomi klijų rezervuarai)

Būklė: naujas, Load capacity 500 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Lrodpfx Asq Sc Auocpjk Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 - Packaging suitable for truck transport.

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Lrjdjxlqntopfx Acpek Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63