Savivartis puspriekabė

SCHWARZMÜLLER K-Serie K202 Kippauflieger Halfep. ca. 24m³

Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: nepatikrintas, bendras aukštis: 6 400 mm, bendras plotis: 4 500 mm, bendras ilgis: 3 800 mm, darbinis greitis: 110 mm/s, atbulinės eigos greitis: 180 mm/s, atstumo lentelė iki stūmoklio: 1 500 mm, We are offering a new build of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Kdedpowlrv Ujfx Af Ijg Technical Specifications: Press Force: 800 T Opening Force: 80 T Motor Power: 55/75 + 55/75 kW Ram Stroke: 1000 mm Rapid Advance Speed: 110 mm/s Working Speed: 6 mm/s Return Speed: 180 mm/s Guide Diameter: 250 mm Maximum Pressure: 250 bar Usable Table Area: 3,500 x 2,000 mm Lower Table Travel: 2,000 mm Between Columns: 2,000 mm Clear Height: 1,500 mm Total Width (Front): 3,800 mm Total Depth (Side): 4,500 mm Overall Height: 6,400 mm Weight: 134,600 kg The MV-800E/NC-SINCRO press has been specifically developed for setting up and testing molds, dies, and punches. The four columns, each with a diameter of 250 mm, are made from C45E steel and designed to withstand heavy-duty use. It is equipped with an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The system meets all essential health and safety requirements according to CE regulations. STRUCTURE AND TABLE • A structure capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic unit with automatic shut-off of rapid advance speed and independent operation, equipped with decompression and proportional pressure pre-fill valves. Includes digital potentiometers on the upper table for displacement control, and an electronic synchronization system for compensation of off-center or unbalanced forces. • The press is fitted with a lateral pressure switch for optimal pressure adjustment according to the working requirements. • Glycerine gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electric system for operating the main cylinder feed at one or two speeds. • The press features both a manual and automatic cycle (activated via a test selector switch): • The manual cycle allows all movements of the press to be executed step-by-step at low speed. • The automatic cycle enables the press to complete a full production cycle independently. • Electrical safety system for the upper table fall-arrest device. • Lower table with hydraulic withdrawal and physical stops. • The machine is operated via a control panel with a touchscreen display for entering operating and calibration data. • Two optical safety curtains (1,000 mm) with safety level IV are installed at the front and rear. • Siemens electrical components are manufactured in accordance with current CE regulations and IP55 protection class. • Electrical and hydraulic functions are redundant and self-monitoring. Includes an additional safety block and self-testing devices for both operation and safety. Includes inspection and certification for correct operation and the safety distance of the light barriers. • Safety is additionally ensured by a laser and area protection with safety light curtains, safety level IV.

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 5 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2089, bendras aukštis: 5 000 mm, stalo aukštis: 1 000 mm, bendras plotis: 3 000 mm, spaudimo jėga: 250 t, bendras svoris: 25 000 kg, HYDRAULIC PRESS BY MIB YEAR: 01/2000 CAPACITY: 250T MACHINE TO BE PUT BACK INTO OPERATION, COMPLETE Ksdpfev Hbh Rjx Af Iedg

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 400 t, stalo plotis: 2 000 mm, stalo ilgis: 1 000 mm, darbinis greitis: 106 mm/s, atbulinės eigos greitis: 125 mm/s, eigos ilgis: 750 mm, presavimo greitis: 12 mm/s, Įranga: apsaugos šviesos užtvara, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS We are offering a new or rebuilt version of this press. The press will be available for sale in the 2nd to 3rd quarter of 2026, as the current project timeline has been extended by the customer. The hydraulic press CF-400E/NC belongs to the CF/NC series and is specifically designed for straightening railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The machine uses an optimized hydraulic system operating at less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements as per CE regulations. TECHNICAL DATA Press force: 400 t Motor power: 22 kW Variable working speed: 4–12 mm/s Approach speed: 106 mm/s Return speed: 125 mm/s Max. pressure: 255 bar Stroke: 750 mm Lower table dimensions: 2,000 x 1,000 mm Ram plate dimensions: 2,000 x 1,000 mm Max. vertical clearance: 1,000 mm Working height: 960 mm Overall height: 3,560 + 600 mm Weight: 39,500 kg STRUCTURE AND TABLE: • The C-frame structure is fully welded from S355JR steel. • After welding, the frame is stress-relieved and machined to ensure perfect parallelism and precision. • The design is calculated and optimized with finite element analysis software. • The upper table is perfectly aligned using four lateral cylindrical guides of 80 mm diameter, each equipped with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: • The main cylinder is single-acting with a sleeved body, hard-chrome plated piston, and maintenance-free, wear-resistant guides. Kjdpfxowkv A Nj Af Iedg • Two lateral double-acting cylinders with hard-chrome plated pistons and wear-resistant guides allow for rapid approach and return movement. • Includes two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for approach and return operations. The pump provides constant power and variable flow rate. • Equipped with directional valve, pressure relief valve, decompression valve, and air-oil cooling system. • Glycerin-filled pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY: • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 COMFORT, housed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. Features a memory capacity for 300 recipes, with each recipe fully programmable for all parameters. • Electrical and hydraulic controls are redundant and self-monitoring. Includes an additional safety block and self-diagnosis devices for controls and safety. Encompasses verification and certification of correct operation and safety clearances for light curtains. • Controlled via an electric low-voltage foot pedal. • For safety, category IV laser and work area protection with safety light curtains are integrated.

Sąlyga: naujas, galia: 294 kW (399,73 AG), kuro tipas: dyzelinas, bendras svoris: 41 000 kg, ašių konfigūracija: 3 ašys, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: euro2, krovinio erdvės tūris: 20 m³, Gamybos metai: 2024, Įranga: ABS, oro kondicionavimas,

Sąlyga: naujas, galia: 294 kW (399,73 AG), kuro tipas: dyzelinas, bendras svoris: 41 000 kg, ašių konfigūracija: 3 ašys, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: euro2, krovinio erdvės tūris: 20 m³, Gamybos metai: 2024, Įranga: ABS, oro kondicionavimas,

Sąlyga: naudotas, didžiausias leistinas svoris: 33 780 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/2013, kita apžiūra (TÜV): 01/2027, krovinio erdvės tūris: 24 m³, Įranga: ABS,

Sąlyga: naudotas, mašinos/transporto priemonės numeris: WDB9642301039xxxx, rida: 140 000 km, Gamybos metai: 2020, Susisiekite su ATS Norway dėl daugiau informacijos. Prašome užklausoje nurodyti nuorodos numerį: 20586 Specifikacijos: Pagaminimo metai: 2020 Rida: apie 140 000 km Pavarų dėžė: automatinė Pakaba: visos plieninės Padangos (žr. nuotraukas) Kdodpfswph U Iex Af Iog Euro emisijų standartas: Euro 6 Ilgis: 872 cm Plotis: 255 cm Ratų bazė: 175 cm Savas svoris: 16 100 kg Varančiųjų ašių formulė: 8x4 Variklio galia: 578 AG Papildomi žibintai Oro ragas Priekabos vilkimo kablys Gal. vaizdo kamera Šaldytuvas Miegamoji kabina Radijas/CD Oro kondicionierius (AC) Aprašymas: Mercedes Arocs 3258 8x4 savivartis, pagamintas 2020 m., su maža rida ir visiškai plienine pakaba. Transporto priemonė su ES registracija iki 2025 m. liepos mėn. ir paruošta eksploatacijai. Priekyje yra smulkių kosmetinių pažeidimų – aiškiai matoma nuotraukose. Km: 140000 AG: 577 Tuv: Ne ES patvirtinimas iki: 2025-07-08 Savas svoris: 16100 Bendras svoris: 36000 Naudingoji apkrova: 19825 Plotis: 255 Ilgis: 872,5 Euro: 6 Modelis: 2020 Mercedes Arocs 3258 8x4 savivartis – maža rida! Pavarų dėžė: automatinė

Sąlyga: naudotas, mašinos/transporto priemonės numeris: WDB9642301035xxxx, rida: 135 000 km, Gamybos metai: 2019, Contact ATS Norway for more information. Please provide the reference number when inquiring: 20584 Specifications: - Year of manufacture: 2019 - Mileage: approx. 125,000 km - Transmission: Automatic - Suspension: Steel suspension - Tyres in good condition (see photos) - Length: 865 cm - Width: 255 cm - Wheelbase: 175 / 280 cm - Unladen weight: 15,450 kg - Emission standard: Euro 6 - Engine output: 578 hp Kodpfxowph Ibs Af Iodg - Tipper body with heating - Drive configuration: 8x4 - Additional headlights - Air horn - Toolbox - Trailer hitch - Reversing camera - Sleeper cab - Radio/CD - Air conditioning - Maintenance history: Partly serviced at Bertel O. Steen (Mercedes dealer), partly in private workshop Description: Well-maintained and robust 2019 Mercedes Arocs 3258 8x4 tipper with low mileage. The vehicle will be fitted with a new front mudguard before sale, and minor defects will be addressed. Maintenance has been carried out both at an authorised Mercedes-Benz dealer (Bertel O. Steen) and in a private workshop. Fast delivery available. Mileage: 135,000 Horsepower: 577 MOT: No EU approval valid until: 25.05.2025 Unladen weight: 15,450 kg Total weight: 36,000 kg Payload: 20,475 kg Width: 255 cm Length: 865.7 cm Euro Standard: 6 Model: Mercedes Arocs 3258 8x4 Tipper – Low Mileage! Transmission: Automatic

Sąlyga: naudotas, tuščias svoris: 5 800 kg, didžiausias leistinas svoris: 30 200 kg, pirmoji registracija: 08/2012, kita apžiūra (TÜV): 09/2025, bendras ilgis: 7 950 mm, bendras plotis: 25 500 mm, bendras aukštis: 30 000 mm, pakaba: oras, padangos dydis: 385 / 55 R 22.5 / 5mm, priekinės padangos dydis: 385 / 55 R 22.5 / 5mm, darbinė masė: 36 000 kg,