Trijų žandikaulių griebtuvas

SCHUNK ROTA TB850-270 LH/4

Būklė: naudotas, Gamybos metai: 2002, Swing diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height above flat bed: 400 mm Swing diameter over cross-slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Nodpjw Dvipofx Afcocp Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose DIN 55027 – size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirements approx.: 6.00 x 3.00 x H2.60 m Control: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction unit, 2 pcs. steady rests. Spindle bearing serviced by OEM in 04.2023 Machine can be inspected under power.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 850 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 550 mm, įrankių magazino lizdų skaičius: 30, valdiklių gamintojas: Siemens, bendras aukštis: 2 560 mm, bendras ilgis: 2 350 mm, bendras plotis: 2 160 mm, bendras svoris: 4 300 kg, stalo ilgis: 1 000 mm, stalo plotis: 550 mm, valdiklio modelis: 828D + Shopmill, aušinimo skysčio tiekimas: 20 juosta, atstumas nuo stalo centro iki veleno galo: 700 mm, greitasis eiga Z ašyje: 36 m/min, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, veleno nosis: SK 40, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 100 aps./min, stalo apkrova: 800 kg, įrankio skersmuo: 76 mm, įrankio ilgis: 300 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Komplekte, be kita ko: Paruošta 4-ajai ir 5-ajai ašiai Tvirtos ritininės kreipiančiosios visose ašyse Verpstės aušinimo sistema (alyvos aušinimas) Greitas dvikrankis įrankių keitiklis su išankstiniu parinkimu ir vertikaliu 30 įrankių žurnalu Grandininė drožlių transporterio juosta Aušinimo skystis per verpstę su 20 bar aukšto slėgio siurbliu Pūstinės oras per verpstę Aušinimo pistoleto pistoletas Judamas elektroninis rankinis valdiklis Pageidaujant galime pasiūlyti šią staklę su tinkamu rotaciniu stalu 4-ajai ir 5-ajai ašiai. Prašome nurodyti tai užklausoje! Nodpfx Afjdkh Tijcjcp

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Sukimosi skersmuo virš lovos: 600 mm Sukimosi skersmuo virš atramos: 400 mm Sukimosi ilgis: 2000 mm Centro aukštis virš atramos: 300 mm Centro atstumas: 1600 mm Sukimosi greičiai: 3 - 2.500 aps./min Grąžto laikiklio kūgis: MK 5 Pagrindinio veleno anga: 62 mm Pinolio eiga: 190 mm Išilginiai padavimai: apie 0,001–10 reguliuojamas mm/aps. Skersiniai padavimai: apie 0,001–5 reguliuojamas mm/aps. Greitasis padavimas X ašyje: iki 5000 m/min. Ncjdpsw Rkt Iofx Afcjp Bendras galios poreikis: 40 KVA Mašinos svoris apie: 5,6 t Mašinos matmenys (IxPxA): apie 4,0 x 2,0 x 1,9 m Įskaitant priedus, žr. nuotrauką *

Būklė: geras (naudotas), Gamybos metai: 2006, Markė: GEMINIS Modelis: GHT4 G2 700x2000 Njdpfx Aexdub Ijfcscp Valdymas: FANUC 21 TB Atstumas tarp centrų: 2000 mm Ø virš lovos: 720 mm Ø virš vežimo: 470 mm Veleno skersmuo: 104 mm Maks. ruošinio svoris tarp centrų: 2 560 kg Veleno galas: DIN 55027-11 Galvos apsukos: 0–1 600 m/min Bendroji galia: 28 kW

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, sukimosi skersmuo virš skersinio stumduko: 570 mm, tekėjimo ilgis: 2 000 mm, veleno skylė: 62 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 3 aps./min, ruošinio svoris (maks.): 2 000 kg, Įranga: sūkių greitis be galo kintamas, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or larger, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom—an on-site inspection is possible! Included in delivery: drawer cabinet with various tools and Multifix toolholders. Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed range: 3 - 2500 rpm Spindle power: 19 kW Ncedpfx Afewv S Rtecop Spindle nose: DIN 55 027 Gr. 8 Tool turret: Multifix Number of turret positions: 2 Tailstock taper: MK5 Controller make/type: Heidenhain Manual Plus 4110

Būklė: naujas, For sale: pipe straightening machine from the German manufacturer SMS MEER. The machine is brand new; it was dismantled from a facility that went bankrupt during the delivery and installation of the equipment. The machine is equipped with two Siemens drive motors, each rated at 200 kW. The straightening rollers have dimensions: length 460 mm, diameter at both ends 400 mm, diameter at the center 300 mm. Machine weight is 44 tons, total weight 55 tons. Additional photos taken before dismantling are available upon request for interested buyers. Njdpfx Afem H Unhocjcp

Būklė: naudotas, Gamybos metai: 1992, X-axis travel 1400 mm Nsdpoftfczsfx Afcocp Y-axis travel 1200 mm Z-axis travel 1000 mm ZM control Total power requirement 0.5 kW Machine weight approx. 2 t Space requirement approx. 2 x 1.5 x 2 m

Būklė: naujas, Gamybos metai: 2023, Extraction capacity at filter unit connection*: 2,600 m³/h (free intake) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your benefits with the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available in simplex (single stage) or duplex (two stage) versions - Wide range of air performances available - Adaptable to pollutant load and required air flow - Large range of installation and connection accessories Nodpfxeh Rdxno Afcjcp - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes with pure oil or for separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filtration units on the market and are in operation worldwide. Our filter units are already available with optional digitalisation and, for example, can be controlled via laptop. The ELBARON® device range includes 18 device variants and can be optimally sized and configured to match your application in terms of capacity and performance. ELBARON® units are characterised by long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiencies, long service lives, and trouble-free operation from an economic perspective.

Būklė: naujas, Gamybos metai: 2026, Technical specifications SWING OVER BED DIAMETER: 360 mm SWING OVER CROSS SLIDE DIAMETER: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100–2000 rpm SPINDLE BORE: 47 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm TAILSTOCK QUILL: MT3 MAX. TAILSTOCK TRAVEL: 100 mm MOTOR POWER: 3.7 kW Nsdpsf Ey Umsfx Afcocp DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available equipment: - SINUMERIK 808D control system in Polish - SIEMENS servo drives - 3-jaw hydraulic chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gearbox and guides - 24V halogen lighting - Technical documentation (DTR) in Polish - CE Declaration The listed price is NET. Transport costs are not included. For further information, please contact us by phone or email. Please visit our website to see our full offer.

Gamybos metai: 2023, būklė: naujas, 3-axis positioner powered by three-phase current Table and arm rotation via hydraulic swivels Arm height adjustment via hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: - welding - cleaning - assembly Increases work efficiency by up to 40% Unlimited rotation on 2 axes, plus additional vertical and horizontal movement, allows flexible positioning of the mounted workpiece (including 'upside down'). The 3-axis positioner offers a significant improvement in work ergonomics compared to traditional rotary-tilting positioners (optimal positioning of the component, easy operation). Advantages and Benefits: For the employer: - increase in work efficiency by up to 40% through optimal positioning of components—which results in a short payback period for the equipment - increased production efficiency without the need for additional production space - improved quality of welds—always possible to weld in the flat position - robust construction ensures long-term, trouble-free operation For the operator: - ensures ergonomic working posture - minimizes the risk of accidents—no need to change the component's clamping position - eliminates downtime caused by waiting for an overhead crane - easy to install and operate Full automation of welding is possible via the use of Kawasaki welding robots. We also offer positioners complete with robot and integrated control system. OPTIONAL FEATURES: - WIRED REMOTE CONTROL FOR OPERATOR - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL Nedjhtq Rbjpfx Afcocp - VARIABLE SPEED CONTROL FOR TABLE AND ARM ROTATION - CONSTANT TABLE ROTATION FUNCTION - CUSTOMIZABLE ARM LENGTH AND SHAPE - CUSTOMIZABLE TABLE SIZE AND SHAPE - ROTATIONAL LOAD CAPACITY We can manufacture positioners according to individual customer specifications.