Konvejerio juosta su atramomis 310x60 cm 2 vnt

SCHUMA PRO-EU

Sąlyga: geras (naudotas), Gamybos metai: 2001, Conveyor belt, belt conveyor, transport belt, conveyor belt system, belt conveyor, flat belt conveyor Lhjdpfx Ahsv Uid No Tsp - Manufacturer: Schuma, belt conveyor with height-adjustable, tiltable frame and 2 swivel castors - Type: PRO-EU 4400/800/GL - Speed: 7 m/min - Belt width: 800 mm - Conveyor length: 4400 mm - Drive: 0.12 kW, see type plate photo - Transport dimensions: 4490/910/H1080 mm - Weight: 143 kg

Sąlyga: naujas, Gamybos metai: 2025, Spray-flood cleaning system – parts cleaning system. Washing (600 liters) + rinsing (430 liters); electrically heated. The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, swivel, or rotate during the cleaning process (selectable via program). Drying by means of hot air and vacuum drying. Basket usable dimensions (LxWxH): 600x400x300 mm Max. loading weight: 150 kg Loading table in front of the system included. Lhedehu Sg Ijpfx Ah Tep Control system: Siemens S7-1200 with 20 programs.

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm Lhedpfotynpxex Ah Tjp • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), 715 NAUDOTAS pusaukštinis, vamzdinis Mondial Forni modelio 53 CS kepimo pečius. Kūrenamas malkomis, granulėmis, dujomis arba alyva. Kepimo plotas: 15 m² Loderf U A Eopfx Ah Tehp Pagaminimo metai: 2014. IŠORINIAI MATMENYS (cm): - Ilgis: 285 - Plotis: 237 - Aukštis: 230 (+ 65 ventiliatorius) KAMEROS MATMENYS (cm): - Gylis: 160 - Plotis: 180 TECHNINIAI DUOMENYS - Kepimo plotas: 15 m² - Kamerų skaičius: 5 Įranga apžiūrai paruošta mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos mokamos paslaugos: remontas / transportavimas / montavimas / paleidimas. Nurodyta kaina – be PVM. Kalbame angliškai, vokiškai ir prancūziškai.

Sąlyga: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Lhodocxxx Hepfx Ah Tjp Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 330 mm, veleno skylė: 78 mm, tekinimo skersmuo virš slankiojančio stalo: 520 mm, centro aukštis: 260 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 670 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 2 135 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Stepless speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the mating surface) of the cross slide and compound slide - Manual central lubrication with a pump for the longitudinal and cross slides - Complete coolant system with rear splash guard and splash protection on the slide - Chuck guard Ledpfx Ahjctutmj Tshp - Control rod with 3 adjustable cams - Machine light - Fixed centre - Set of machine levelling pads

Gamybos metai: 2013, Sąlyga: naudotas, Cutting diameter: 420 mm Saw blade length: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Band speed: 17 - 110 m/min Ljdpsd Izmajfx Ah Tehp Saw motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw including round bar magazine and unloading gripper, designed for sawing round bars from 50 to 420 mm. The magazine features 6 storage compartments, each with a maximum bar weight capacity of 3,400 kg. Cutting lengths range from 20 to 1000 mm. Like-new condition, approximately 1,000 operating hours.

Sąlyga: naujas, Swing diameter: 560 mm Turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Centre height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed: 35 / 0.059 – 1.646 m/min Face feed: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight: approx. 2560 kg Space requirement: approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty lathe distinguished by high flexibility, precision, and cost-effectiveness. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined cross slide - All guideways adjustable via gib strips - Forward/reverse operation on cross slide via shift spindle - Dual-channel safety electronics - Central lubrication in cross slide - Compound rest swivelling range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, with two adjustable precision tapered roller bearings - Switch with life cycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine calibration 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125 on X and Z axes - Gears and shafts hardened and ground, running in oil bath on precision bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-change feed gearbox - Emergency stop punch button, motor protection switch, lockable main switch - Emergency stop foot pedal - Tailstock offset for taper turning ±10 mm - Tailstock quill and handwheel with adjustable fine calibration 0.025 mm; quick, simple, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose guidance - Heavily ribbed, induction-hardened, and precision-ground grey cast iron prism bed - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Adjustable leadscrew dial scale Scope of supply: Ledpfx Aheucgr Io Tohp - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø113 mm / MT 5 - Fixed centre MT 5 - Fixed and revolving centre MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Sąlyga: naujas, Gamybos metai: 2025, For delivery times and up-to-date daily prices, please contact us directly. Condition: New machine Centre height: 200 mm Centre distance: 1,000 mm Spindle speed: 70 – 2,000 rpm (8 steps) Standard equipment includes: - 3-axis digital readout DPA 21 - Machine base - 200 mm three-jaw chuck - LED machine lamp - Reducing sleeve MK 4/MK 6 - Fixed centre MK 4 - Fixed steady rest - Travelling steady rest - QCTP base body E - QCTP tool holder ED Lhedpfx Asq Ui Tdsh Top - Electrically interlocked chuck guard - Oil filling - Operating tools - Operating manual

Sąlyga: paruoštas naudoti (naudotas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Ledpfom Habdox Ah Tehp