Dviejų stulpelių spauda

SCHULER EBS4-800-3,5-700

Sąlyga: naudotas, Gamybos metai: 2004, Pressure 630 t Stroke 800 mm Upright distance 2600 mm Distance table/ram, max. stroke up, adj. up 1500 mm Table surface 2500 x 1300 mm Cushion pressure in table 300 t Cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side frame opening 1040 mm Speed down 600 mm/s Speed up 360 mm/s Working speed 14 - 42 mm/s Drive power 145.0 kW Weight 85.0 t Space requirement (W x D x H) 4.2 x 4.0 x 7.8 m Height above ground 6.80 m Height below ground 1.0 m Nksdov Svaropfx Agiju Demonstration machine from technical university with approx. 920 operating hours! As-new condition! Certified for manual loading operations according to CE standard. Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, upper and lower stroke limitation, front and rear light curtain (Sick), hydraulic cushion in the table incl. ejector function, hydraulic shock absorption for cutting, mechanical depth stop via 4 motorized adjustable spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulically operated ball roll rails in the table, 4 vibration isolators.

Sąlyga: naudotas, Gamybos metai: 1988, Pressing force 400 t Distance between uprights 1100 mm Stroke 250 mm Nksdjvuuknjpfx Agieu Stroke rate 25–75 /min Distance table/ram, max stroke up, adj. up 900 mm Table surface 1100 x 965 mm Table ejector force 30 t Table ejector stroke 80 mm Ram ejector force 3 t Ram ejector stroke 60 / 70 mm Ram surface 980 x 800 mm Side frame passage 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (WxDxH) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Control cabinet dimensions (WxDxH) 4.9 x 0.5 x 2.6 m Multi-stage cold forming press with linkage drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motor-driven ram adjustment, pneumatic compensation cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in the ram (3 t, 60 mm), automatic central lubrication Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Sąlyga: naudotas, Gamybos metai: 1988, Spaudimas: 300 t Stovo atstumas: 1800 mm Eiga: 1000 mm Atstumas tarp stalo ir stūmoklio, didžiausia eiga viršuje, reguliuojamas viršuje: 1300 mm Nedpfx Aevut Hnjgijku Stalo matmenys: 1600 x 1200 mm Stalo aukštis virš grindų: 1080 mm Stūmoklio paviršius: 1600 x 1200 mm Svoris: 24,0 t Užimamas plotas (PxGxA): 2,8 x 2,1 x 6,0 m Leidžiama darbui rankiniu įdėjimu pagal Vokietijos nelaimingų atsitikimų prevencijos reikalavimus (UVV §20) Su alyvos hidraulinė pavara, valdymas priklauso nuo slėgio/laiko ir eigos, dviejų rankų valdymas Gali būti siūloma be paleidimo arba su nauja Siemens S 7-1500 F valdymo sistema Prieš išmontavimą tiekėjo vietoje galima peržiūrėti vaizdo įrašą

Sąlyga: naudotas, Gamybos metai: 2003, Pressing force: 400 t Column gap: 1060 mm Stroke: 450 mm Strokes per minute: 15 - 30 Distance table/ram, max. stroke up, adjustment up: 1160 mm Table area: 1000 x 700 mm Ejector force in table: 2 x 16 t Ejector stroke in table: 125 mm Cushion force in table: 120 t Cushion stroke in table: 2 mm Nkedpfx Aevzxpusgisu Ejector force in ram: 2 x 4 t Ejector stroke in ram: 100 mm Ram area: 1000 x 700 mm Side frame opening: 630 mm Drive power: 55.0 kW Weight: 50.0 t Year of manufacture: 1986 - Overhauled in 2003 Multi-stage press with automatic part feeding, transfer system, drawing cushion in table (2nd stage) as is and as stored, WITHOUT commissioning, dismantled and in storage

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally configured as an automatic transfer press, it was converted to manual operation in 2012, but can be retrofitted for automatic operation again. The press is still assembled, powered, and in very good condition. Pressing force (tons): 200 Nodpfohtaaqjx Agijku Oil volume (liters): 1100 Stroke (mm): 300 Table size (L x W, mm): 600 x 600 Installation space (mm): 1000 Upper ejector stroke (mm): 25 Upper ejector force (tons): 10 Total weight (kg): 12,000 Operating pressure (bar): 6 Rapid approach lowering speed (mm/sec): 375 Working speed (mm/sec): 18 - 40

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: MURARO Modelis: ID500/250 Metai: 2001 Būklė: Naudotas Sandėlio numeris: Cod. 0114 Didžiausias viršutinio stumoklio slėgis: 500 t Stumoklio eiga: 900 mm Maksimalus vertikalus tarpas: 1 500 mm Stalo matmenys: 2 700 x 1 600 mm Stumoklio matmenys: 2 700 x 1 600 mm Nsdpex R U R Esfx Agieku Lakšto spaudimo stalo matmenys: 2 450 x 1 250 mm Stumoklio priartėjimo greitis: 650 mm/sek (priartėjimas) Lakšto spaudimo pagalvė – bendra jėga: 250 t Apatinės lakšto spaudimo pagalvės eiga: 400 mm Preso aukštis nuo grindų: 5 600 mm

Sąlyga: naudotas, Gamybos metai: 1979, Pressure: 160 t Column gap: 1,620 mm Stroke: 600 mm Distance table/ram, stroke top: 800 mm Table size: 1,600 x 1,100 mm Table height above floor: 750 mm Drawing cushion force in table: 63 t Drawing cushion stroke in table: 180 mm Drawing cushion area in table: 1,300 x 750 mm Lateral column passage: 600 mm Ram area: 1,600 x 1,100 mm Oil capacity: 1,160 l Drive power: 30.0 + 16.0 kW Weight: 23.6 t Space requirement (W x D x H): 2.9 x 2.3 x 4.65 m Height above floor: 4.26 m Approved for manual feeding operations according to German industrial safety regulations (UVV) with electro-hydraulic drive, hydraulic drawing cushion in table no foundation pit required Can be offered without commissioning, with commissioning in its current condition, or alternatively with new Siemens S7-1500 F control system Video available from seller prior to dismantling Nodjvut Ryepfx Agieku

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 350 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting (ram + cushion) system architecture for heavy-duty metal forming, deep drawing, and stamping applications. Thanks to its 8-guided H-frame structure, high rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and a 350-ton die cushion capacity, is specifically designed for deep drawing operations requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industries. The steel construction frame is stress-relieved by vibration, providing long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body Nedpex N Uilofx Agisku • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning control • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Cushion): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.