Frezavimo staklės su lova - Universal

LAGUN FBF 4300

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BBT 30 (Big-Plus) - Spindle drive power: 12 kW - Spindle speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700/400/330 mm - Rapid traverse speed (X/Y/Z): 54 m/min - Feed rate (X/Y/Z): 1-30,000 mm/min TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 TABLE - Table size: 850 x 410 mm - Max. table load: 300 kg - Distance from table to spindle nose: 250-580 mm ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 2165 x 2087 mm - Machine height: 2345 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 3,207 hrs ACCESSORIES - Control unit: Fanuc 31i model B5 - 3-color status signal lamp ROTARY TABLE * Manufacturer: Häberle * Model: DTTiB * 4th axis travel: 360° * 4th axis minimum increment: 0.001° * 5th axis travel: -7/+100° * 5th axis minimum increment: 0.001° * Clamping type: Pneumatic - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant (IKZ) - Rear chip conveyor Nsdpfx Asx Tvizocpjcr - Tool probe system: Renishaw - Workpiece probe system: Renishaw - Electrical transformer - Machine vise - Tool holders

Būklė: geras (naudotas), Gamybos metai: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide travel: 850 mm Drilling method: single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse speed (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max travel: 200 mm Njdpfsvca Rcjx Acpecr Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and timeliness of the information provided.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, We offer you the following: Manufacturer: DMG Mori Model: CLX 350 V6 Year of manufacture: 2022 Ncjdpjyzbl Rofx Acpor Control unit: DMG Mori SLIMline Siemens Operate Technical Data: Max. turning diameter: 320 mm Distance between centers: 780 mm Bar capacity: max. 65 mm Travel axes: x-axis travel: 185 mm y-axis travel: +/- 40 mm z-axis travel: 465 mm Main spindle: Spindle speed: 5,000 rpm Drive power: 11/16.5 kW Counter spindle: Spindle speed: 5,000 rpm Drive power: 12.6/16.2 kW Number of tool stations: 12 positions Tool holder: VDI 30 Operating hours: approx. 1,760 h Spindle hours: approx. 1,130 h Technical Features & Accessories: - Direct measuring system for x and y axes - External electronic handwheel - Bar package & interface, includes: - Workpiece removal device for parts up to D65 x 200 mm, max. workpiece weight 3 kg - Connection for bar feeder - Chip conveyor with right-side discharge - 4-color signal lamp - Collet chuck, make: Hainbuch SPANNTOP nova combi - Differential pressure actuation for the counter spindle - External chuck flushing for counter spindle - Automatic workpiece ejector, counter spindle with internal coolant supply for chuck flushing - Hydraulic 3-jaw chuck, make: SMW BB-D 175 for counter spindle - Coolant system 5 – 20 bar, includes: - High-pressure pump - Dual cartridge filter for coolant/lubricant - Coolant spray gun, 5 bar - Prepared for oil mist separator - Manual tool measurement device - Automatic bar loader, make: IEMCA KID80/16 - Partial belt conveyor - Technology cycle "Alternating Speed" - Technology cycle "y-Axis parting" - Technology cycle "Easy Tool Monitoring 2.0" Accessories, illustrated tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, ašių skaičius: 9, Šis 9 ašių NAKAMURA-TOME WY150 buvo pagamintas 2023 m., jame yra tekinimo frezavimo centras su išsamiu įrankių laikiklių komplektu, įskaitant 6 išorinius, 4 vidinius, 3 radialiai besisukančius ir 12 ašinių besisukančių laikiklių, taip pat įvorinį laikiklį ir 3 žandikaulių laikiklį. Apsvarstykite galimybę įsigyti šį NAKAMURA-TOME WY150 tekinimo frezavimo centrą. Susisiekite su mumis dėl išsamesnės informacijos. Papildoma įranga • 6 išoriniai įrankių laikikliai • 4 vidiniai įrankių laikikliai • 3 radialiai besisukantys (varomieji) įrankių laikikliai • 12 ašinių besisukančių (varomųjų) įrankių laikiklių • 1 spaustuvinis griebtuvas Njdpfx Aceyb Sakepscr • 1 trijų žandikaulių griebtuvas

Būklė: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Njdpfou Rqynsx Acpecr Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Vertical digital readout Mounting for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Būklė: geras (naudotas), Gamybos metai: 2009, Elumatec SBZ 140 Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F fitting, 8-position tool changer Max. milling diameter: 80 mm Max. saw diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Ncjdpjx E Ahzofx Acpsr It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotary A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system with PC operation, color display, USB & network. Software: eluCam. Automatic material clamps; automatic positioning via locating pins Pendulum/shuttle processing (two working zones) to improve production throughput time. In addition to milling and drilling, also tapping, sawing, and profile processing—all with stationary clamped profiles. Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend verifying all relevant details. Financial information VAT/Margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Parduodame šią šlifavimo staklę, pajungta, galima išbandyti. Staklių parametrai: sukimba rotacinių detalių šlifavimas tarp centrų su 0,001 mm tikslumu. Maks. tekinimo skersmuo: 0-1 450 mm Njdpsxxrzzofx Acpjcr Maks. tekinimo ilgis: 6 000 mm Maks. ruošinio svoris: 20 000 kg (25 000 kg su laikikliais) Šlifavimo disko skersmuo: 915 mm Disco plotis: 100 mm Nekontaktinis matmenų, leistinų nuokrypių ir geometrijos matavimas su matavimo protokolo spausdinimu. Galimybė 100% ultragarsinio matavimo. CNC valdymas su galimybe šlifuoti formų paviršius (kūgis, įgaubtas ir išgaubtas, CVC). Keraminių ir metalinių dangų šlifavimas naudojant deimantinius ir keraminius šlifavimo diskus. Ant staklių šiuo metu pabaigiama užsakymas.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Nsdpewhp Dnjfx Acpocr Centre taper: MT5 Maximum travel of grinding spindle headstock: 100 mm Maximum swiveling of grinding spindle headstock: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Būklė: naudotas, Gamybos metai: 1984, x-axis travel: 2500 mm y-axis travel: 750 mm z-axis travel: 1000 mm Table clamping surface: 2550 x 800 mm Spindle taper: SK 50 Control: HEIDENHAIN TNC 150 B Ncodpfstqqnwox Acpjr Machine weight approx. 16 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo aukštis: 3 000 mm, ruošinio svoris (maks.): 30 000 kg, tekėjimo skersmuo: 3 500 mm, galia: 100 kW (135,96 AG),