Ūkio degalinė Įmonės degalinė

Schneider Tankbau Dieseltankstelle Tankanlage

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 500 h, Funkcionalumas: visiškai funkcionalus, pjovimo jėga: 630 t, galia: 90 kW (122,37 AG), tuščias svoris: 36 500 kg, bendras plotis: 2 400 mm, bendras ilgis: 9 500 mm, bendras svoris: 40 000 kg, pjovimo ilgis (maks.): 1 600 mm, paskutinio kapitalinio remonto metai: 2024, įvesties srovės tipas: trifazis, darbinis slėgis: 220 juosta, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. A 250kW diesel generator can be offered separately. Iaodpfjuu Upgex Aaujr Model: MS-6300e Shearing force: 630 t Cutting length: 1,600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3,850 mm x 2,600 mm x 1,500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Due to the horizontal feed section and the weight of the scrap, it falls down into the loading chamber and into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool carrier through the blades on the end wall. As the tool carriage moves horizontally, the processed material is pushed out through the blades at the front of the chamber. When returning to the rear position, the loaded scrap shifts by its own weight into the interior of the shear. Scrap shears are available in various configurations to suit customer requirements, and the output size can be selected (for new orders). Inspection and test operation are possible.

Būklė: naujas, tuščias svoris: 17 500 kg, didžiausias leistinas svoris: 43 500 kg, bendras svoris: 61 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 7 550 mm, krovinių skyriaus plotis: 2 750 mm, krovos erdvės aukštis: 400 mm, padangos dydis: 245/70 R 17.5, spalva: pilkas, Įranga: ABS,

Būklė: naujas, tuščias svoris: 17 250 kg, didžiausias leistinas svoris: 48 700 kg, bendras svoris: 66 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 7 550 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 375 mm, padangos dydis: 245/70 R 17.5, spalva: pilkas, darbinė masė: 17 250 kg, Įranga: ABS,

Gamybos metai: 2023, būklė: naujas, Tank & Environmental Protection Wozniack - Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We are offering a 10,000-liter double-walled storage tank for the storage of heating oil, compliant with EN 12285-2 standard. Nominal capacity: 10 cbm, new, EN 12285-2 standard Paint finish: RAL 7035 Iajdpfx Ajk Dpv Asausr Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / type plate Includes: 1 piece dipstick 1 piece vent connection 1 piece fill connection 1 new overfill prevention device 1 new leak monitoring device 1 piece ladder 1 piece suction line Tank dimensions: approx. 5,300 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Above-ground installation Delivery time: September Best regards from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 2004, būklė: naudotas, Tank & Environmental Protection Wozniack Dear Sir or Madam, We are offering a 25,000-Liter Double-Walled Storage Tank / Diesel Tank ===== Nominal volume: 25 m³ Quantity: 1 Used, but fully refurbished. This means the tank has been cleaned, sandblasted, primed, and painted. Color: Standard RAL paint finish. However, you are welcome to specify your desired color requirements. Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate/inspection certificate according to DIN 6616 D/2 and type plate Item: 1 dipstick Item: 1 vent connection Item: 1 fill connection Item: 1 new overfill prevention device Item: 1 new leak detection device complete with filled leak indicator fluid Item: 1 ladder Item: 1 suction line Shape: Cylindrical storage tank with feet/consoles Tank dimensions: Length approx. 8,390 mm Diameter approx. 2,000 mm Isdpec Nkr Nsfx Aausar Weight approx. 4,500 kg Installation: Above ground Compact diesel dispenser Piusi 70 L/min. Pump: 230 Volt, max. 55 L/min. (70 L/min option available on request) You can, of course, customize your tank system! We are happy to accommodate your color and equipment preferences wherever possible. All our systems are thoroughly inspected and checked by selected staff at our company. We also offer cost-effective delivery on request. You are welcome to view our tanks at any time. Further storage tanks for above-ground and underground installation are available in all sizes and are on display for sale on our premises. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Kind regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Isdpevf E Avsfx Aauear The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Iasdpfx Aaedy Hm Djuer Maksimalus įrankio eigos ilgis – 250 mm. 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings comprising: - 3" fill pipe with TW cap - 1" dip tube with dipstick - Euroflex 3 suction unit (max. 150 l/h) - 1 vent connection 2" with vent cap The tank is factory-fitted with the aforementioned fittings and is internally cleaned. Capacity: 80,000 litres Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg Ijdpfx Aehvidgeaujar The tank can optionally be supplied with a new paint finish in your desired RAL colour and equipped with a ladder including an operating platform. Cost-effective delivery by our own truck is possible. Simply let us know your delivery location, and you will promptly receive the exact shipping costs. If you require further information, please feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible—just give us a call to discuss this. Delivery time by arrangement! We also always have similar tanks in the following sizes available from stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, and 100,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Būklė: naujas, Supply voltage: 230 V Battery: 24V / 100Ah Brush diameter: 510 mm Brush speed: 175 rpm Vacuum airflow: 24 L/s Tank capacity: 50 / 50 liters Weight: 160 kg Dimensions (L x W x H): 1.1 x 0.52 x 1.0 m KREMER Floor Cleaning Machine: Supplied with battery and charger Theoretical area performance: Capacity: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area gradient: 2% Iedpovu Hccjfx Aauear Fresh/dirty water tank capacity: 50 / 50 L

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 20 000 l, Diesel Filling Station – Home Fuel Station – Tank System – Small-Scale Tank Station Consisting of: 1 x 20m³ Storage Tank – factory new 1 x Dispenser Type eco 75 – factory new Description of Steel Tank: 20,000 litres capacity according to EN 12285-2 – Class B (Replaces DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in Seismic Zone 0. The tank is equipped with two saddle feet, a manhole with dome cover and comes with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip pipe - 1 gauge pipe with dipstick and dipstick cap - 1 vent pipe with vent hood - 1 factory-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for withdrawal purposes - 1 optical leak detector with type approval and leak detection fluid The tank is externally sandblasted, primed, and coated in RAL7011 iron grey. (Other RAL colours available at extra cost.) Length = approx. 6.90 m + approx. 0.70 m (bracket) – diameter = 2.00 m – weight approx. 4.2 tons – ex works, loaded free of charge Description of Dispenser: Type eco 75 – not calibratable Flow rate up to approx. 75 l/min. Suitable for diesel fuel, including: - Tank management system with connection to myTecalemit cloud - Incl. web-based tank data management software – Basic module - 2 identification systems driver/vehicle for max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase AC motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m dispensing hose DN 25 with type-approved automatic nozzle, incl. swivel joint and hose holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line, illuminated monochrome display, character height 8 and 19 mm - Data storage for up to 10,000 dispensing records - Menu navigation in German, English and French Iaodpfx Asi Artlsauer Magnetic keys / transponders are required in addition: General Information: The price for the filling station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at low cost for an additional charge.) You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Further tank systems (new and used), as well as rental units, are also available! Additionally, we buy back existing tank systems and can professionally empty, clean, dismantle and transport them with certified specialist contractor qualification according to the German Water Resources Act (§ 62 WHG).