Dekoileris-tiesintuvas

SCHLEICHER RM-S 300 / H 2

Gamybos metai: 1988, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 11801, Gietz FSA 720 Folie- en stempelpers voor pregen en foliedruk. Formaat 720x520 mm, minimaal velformaat 297x210 mm, dubbele velherkenning, drukkracht 120 ton, maximale snelheid 5.000 vel/uur, aanvoerstapelhoogte 950 mm met maximaal 700 kg, uitvoerstapelhoogte 700 mm, machine-afmetingen 380x280x195 cm. Machinenummer: 11801. Kjdpfownqrgsx Aausdk

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m Kdodpsd Iipmsfx Aausk SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau der Marke URBAN, bestehend aus: *1. Zwei-Kopf-Schweißmaschine; Marke URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, voll funktionsfähig; *2. Nutfräsmaschine; Marke URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, voll funktionsfähig; *3. Doppelgehrungssäge: Marke RAPID, Modell DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird mit Absauggerät mit Filtersäcken verkauft, voll funktionsfähig; *4. MACC Stahltrennsäge, Modell NEW 275, Seriennummer: 88266, Baujahr: 2008, voll funktionsfähig; *5. Pantograph der Marke URBAN, Modell MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, voll funktionsfähig; *6. Vertikalfräsmaschine; Marke URBAN, Modell M7CRH-100149891, Seriennummer 559, Baujahr: 2008, voll funktionsfähig; Kjdpfjucl Dcsx Aauodk *7. Entgratmaschine mit 2 Fräsaggregaten; Marke URBAN, Modell SV 280, Seriennummer: 29342, Baujahr: 2008, voll funktionsfähig; *8. Stabtrennsäge; Marke URBAN, Modell GLS 102, Seriennummer: 102015, Baujahr: 2010, voll funktionsfähig; Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8h (abhängig von der Anzahl der Bedienpersonen). Die Linie war von 2010 bis 2014 nur sehr wenig und nicht unter voller Auslastung im Einsatz. Einzelmaschinen aus der Linie können auf Anfrage verkauft werden. Nettopreis komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Gamybos metai: 1987, būklė: naudotas, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Kdedpfx Aaofn Aqleuok Total power requirement kW Machine weight approx. t Space requirement approx. m motorised decoiler

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Kdedpfefx Hv Hsx Aaujk Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Kjdpfjcdrmmjx Aauedk Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo

Būklė: paruoštas naudoti (naudotas), CAP30 DOZATORIUS 1000 HELICAP23: Pagaminimo metai: 2016 Versija: 300V Darbo valandos: 15 600 Kaina: 150 000 EUR FCA Lenkija Kjdpfxjw Nqn Ns Aauedk Įrenginys buvo naudojamas gamyboje iki rugsėjo 20 d. Puiki būklė Puiki būklė, paruošta išsiuntimui.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D20E/7694, Pasiūlymo numeris: D20E/7694 Mašinos tipas: Daugiavietė sausos vielos tempimo mašina Gamintojas: SKET / MILL Tipas: 8 BLOKAI Pagaminimo metai: Įėjimo skersmuo: 6,5 mm Galutinis skersmuo: 1,6 mm Kdsdpewi S Ixofx Aauok Tempimų skaičius: 8 Diskų skersmuo: 550 mm ir 650 mm Greitis - metrai/sek.: 8-12 Vieta: Europoje

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Expanding Mandrel Decoiler Type: AE-050 Strip Width: 400 - 1,500 mm Strip Thickness: 0.5 - 3 mm Coil Weight: 20 t Coil Ø, outside: max. 1,800 mm Mandrel Ø: 508 mm Year of manufacture: 2009 Kdjdpoupg Scofx Aaujk

Būklė: naujas, SCM Olimpic 500 HT - Automatic Edge Banding Machine Brand new machine with warranty. - Olimpic 500 - Version “HP T-ER2” - "eye-S" control console (control panel) - Human-Machine Interface (HMI) software "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Internal LED lighting for the cabin and edge banding area - "Nesting" tracer rollers - Separating agent spraying unit "AAR" 1 - Edge finishing spray device Kdsdjwkf Ihopfx Aauok - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Special offer: promotional machine at a special price.