Pjaustymo ir apdorojimo centras

Schirmer BAZ 1000-G6NU Tandem

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, 1600 mm vertical open-top glass washing and drying machine Glass thickness: 3–19 mm Inlet conveyor: 2 m Outlet conveyor: 2 m Total length: 6 m Total power: 9 kW The machine is fully functional and in very good condition. Gjdowwivpopfx Abdjil

Sąlyga: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 200300381, bendras ilgis: 5 220 mm, ruošinio svoris (maks.): 3 000 kg, Baveloni LV1604-20 Glass Washing Machine Working direction from right to left. Illuminated outfeed zone for quality control. 3 washing zones, each with its own water tank: - The first tank supplies brush pair no. 1, is electrically heated, and is filled with a water/detergent mixture. Gijdsvkxzpjpfx Abdol - The second tank supplies brush pair no. 2, with cold water used for rinsing. - The third tank serves washing zone 3, equipped with spray nozzles for final rinsing with pure water. Subsequently, the glass passes through a drying zone using air jets powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top to allow processing of taller glass sheets. Maximum glass thickness: 20mm. Infeed section length: 1400mm; main machine body length: 1820mm; outfeed section length: 2000mm. Automatic stop for the feed rollers when the glass reaches the end of the outfeed zone. Operating manual, spare parts list, and wiring diagram are included. The machine has been regularly maintained and is ready for operation. It will be dismantled in calendar weeks 31/32 of 2025. For more details and precise dimensions, please refer to the photos or contact us directly. Demonstration and on-site inspection available upon arrangement. Dismantling, loading, and transport should preferably be organized by the buyer, but can be arranged by us upon request. Forklift and various auxiliary tools can be provided as required. All data and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given regarding completeness or accuracy. Sale subject to prior sale. Sold as seen, without warranty or guarantee.

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), A Forel multi-pane insulating glass production line with fixed spacer and Swiggle is available. Glass production options: double/triple glazing, assembly: coated/uncoated, insulating glass unit dimensions X/Y min./max.: 400mm x 200mm / 2500mm x 2000mm, glass thickness range: 12mm-50mm, total line length: 30,200mm. Line components: 1) Infeed to washing machine, 2) Washing machine, 3) Outfeed from washing machine, 4) Infeed for spacer placement, 5) Spacer placement, 6) Outfeed spacer placement, 7) Infeed assembly station, 8) Assembly station, 9) Outfeed assembly station, 10) Infeed to roller press (non-gas-filling press), 11) Outfeed roller press, 12) Tilting roller table for unloading. Documentation available. On-site inspection possible. Godeugv R Iopfx Abdeil

Sąlyga: naujas, Mitre Saw Automatic UK-450 - Saw blade diameter: 450 mm - Processing length as per customer requirements - Automatic positioning - Automatic mitre angle adjustment (up to +/- 60°) Gsdpfxjd A Ttxo Abdoil - Suitable for processing wood, plastics, and aluminium - Infeed table as smooth feed track (optionally available as roller conveyor) Further technical details and specifications available upon request.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Deilman S, Dipping tank measuring 6.5 m in length, 1.4 m in width, and 1.5 m in height, equipped with a 6 m loading platform. We also offer other dipping tanks with lengths up to 12.5 m. Gijdoudwdwjpfx Abdsl

Sąlyga: naujas, Gamybos metai: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Gisdpfoizkhvjx Abdsl Weight:

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Gjdpfx Abeiuznuodoil Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 302827, Federhenn Profilbearbeitungszentrum (Bohren und Fräsen) SBZ 100G – Gedpfx Abownpa Nodjil ZUM VERKAUF IM VERBUND MIT 1 SCHIRMER NC-SÄGE 1000-G4 BAUJAHR 2014 (KOMPLETTE LINIE), SIEHE SCHIRMER-ANZEIGE...!! NC-Zuführeinheit mit Greifer, max. 200 m/min – max. Profilänge 3.500 mm. Der Greifer ist pneumatisch in 2 Achsen verstellbar, zur Anpassung an unterschiedliche Profilgeometrien. Bearbeitungsstation als G-Modul gestaltet, mit 2 Servoachsen in Y- und Z-Richtung. Ausgelegt für die Aufnahme von bis zu 14 Bearbeitungseinheiten zur Komplettbearbeitung von PVC-, Rahmen-, Pfosten- und Flügelprofilen – Ausförderer mit Tisch 2.500 x 1.500 mm. PC-Steuerung C 6140, Display, Software SBZ 100G, SPS+NC. Modem-Ferndiagnose. Belademagazin mit 9 Plätzen (9 Profile à 3.500 mm), geeignet für Rahmenprofile mit max. 127 mm Breite. Barcodescanner – Horizontalförderband mit 9 frei einstellbaren Transportbalken. 18 m/min – 3.000 x 2.400 mm – Bearbeitungseinheiten: Schraubeinheit, 2 x Bohreinheit für Dübel- oder Pfostenlöcher, 2 x Bohreinheit für Befestigungslöcher mit 16.750 U/min, 2 x Zusatzbearbeitungen (Markierung des Schließteils), Bohreinheit für Haustürbeschläge (nach innen öffnend), Bohreinheit für Olivenlochbohrung (3-sp.) Fräseinheit Schlosskasten. 2 Stk. Fräseinheit zum Fräsen und Bohren von Entwässerungs- und Lüftungsschlitzen, 1 davon schräg angeordnet. 1 Schwenkvorrichtung (MD- und AD-Fenstersysteme). Fräseinheit für PZ- und Grifflochmusterfräsung.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner Gedpfxom Ak R Us Abdsil SPS, NC control User-friendly visualization

Gamybos metai: 2019, Sąlyga: naujas, Preparation of a written quotation / cost estimate for a powder coating plant from Romer. Giodpsc Sd D Sefx Abdol