Schiepe automatinis krovimo įrenginys

Schiepe Stapelautomat SA6V-12/3 RGM

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Giedpfxjr Iig Do Abdsl

Gamybos metai: 1988, Sąlyga: reikia remonto (naudotas), Mechanizacija prieš obliavimo stakles, skirta KVH/BSH – ilgiams iki maždaug 13 m. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis atskyrimas – vienetinis išskirstymas. 4 vnt. reguliuojamų šoninių diskinio pjūklo skersinio pjovimo staklių. Pjovimo skerspjūviai: 180 x 220 mm, 150 x 300 mm. Pakanka vieno operatoriaus. Gsdpfx Aevbtpobdeil

Sąlyga: labai geros būklės (naudotas), Planer 9 Köpfe Arbeitsbreite: 20 cm Arbeitshöhe: 22 cm 5 Ziehwalzen im Tisch Köpfe: 1 unten – 7,5 kW 2 rechts – 11 kW 3 oben – 11 kW 4 rechts – 11 kW 5 oben – 11 kW 6 unten – 11 kW 7 oben – 11 kW 8 unten – 11 kW 9 universal – 11 kW Gijdpfx Abetrdwtedel PERFEKTER ZUSTAND!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007,

Gamybos metai: 2023, Sąlyga: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Giedpfx Aencd Azjbdsl Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Sąlyga: naudotas, Gamybos metai: 2004, WEINIG GRECON FINGER JOINT LINE DOUBLE END MODEL PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scoring unit: 5.5 kW Gjdpfswry I Eex Abdjil - Year: 2004 CE

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 24 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 6 000 mm, laisvas kėlimas: 1 718 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 643 mm, šakių laikiklio plotis: 1 750 mm, šakių ilgis: 1 200 mm, tuščias svoris: 5 814 kg, bendras ilgis: 1 600 mm, pavaros tipas: Elektro, statybos plotis: 1 540 mm, Keturkryptis šoninis krautuvas Krovos centras: 600 mm Šakių plotis: 125 mm Šakių storis: 50 mm ISO klasė: ISO 3 klasė = 2 500 - 4 999 kg Stiebo tipas: Triplex Techninė būklė: labai gera Priekinės padangos tipas: pilnos gumos Priekinės padangos dydis: 406 x 176 mm Priekinės padangos būklė: 80–100% Galinės padangos tipas: pilnos gumos Galinės padangos dydis: 559 x 254 mm Galinės padangos būklė: 80–100% Baterijos įtampa: 48V Baterijos talpa: 930Ah Baterijos metai: 2025 Baterijos būklė: nauja Integruotas šoninis poslinkis (+/- 100 mm), hidraulinis šakių padėties nustatytojas (uždaryta padėtis 290 mm, didžiausias atstumas 1750 mm (išorėje nuo šakių iki išorės)), 3-iasis vožtuvas, 4-asis vožtuvas, darbinis žibintas gale, darbinis žibintas priekyje, šildymas, pilna kabina, pilnas laisvas kėlimas, CE sertifikatas, saugos šviesa, LED darbiniai žibintai (2 į priekį, 2 į šoną), posūkio švyturys, atbulinės eigos įspėjamasis signalas. Spalva: Combilift Hi-Vis žalia (RAL 6018) ir pilka. Pagalbinis hidraulinis valdymo vožtuvas su 2 žarnomis, baigiančiomis šakių laikiklyje. Giedpsv Tf Arefx Abdol

Sąlyga: naudotas, No. 3176 Gijdeu Agh Sopfx Abdjl WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2013, Sąlyga: naudotas, Drying chamber with intermediate ceiling ventilation and front-end loading by trolley for production and conditioning of 3 mm oak lamellae, with initial moisture 12 to max. 15% / final moisture 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of manufacture: 2013 Rated power: 7 kW / 15A Frequency: 50 Hz Control voltage: 24VDC / 230VAC Gedpfx Ajvwfhiebdeil Protection class: IP54 Capacity: The chamber holds: - 2 packs widthwise at 1.10 m each – with 0.20 m spacing between - 1 pack in height at 1.80 m – with 0.10 m thick base timbers and 0.10 m free space - 2 packs in length at 2.20 m each – plus 0.60 m free space The chamber contains 4 stack packs and has a gross total volume of 17.4 m² The net capacity is 4 m³ of wood – based on a wood thickness of 3 mm and stacking batten thickness of 10 mm, as well as 90% width utilization for trimmed wood. Usable dimensions per chamber: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-leaf swing gate - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heater register, 50 kW, flow temperature 80°C, return temperature 73°C - Servo-controlled supply and exhaust air dampers - Cold water spraying system - Chambers run fully automatically - Computer control system K5 Dismantling: at customer’s site Handover in as-seen/where-is condition without warranty or guarantee

Sąlyga: naudotas, Stenner VH105 dvojitá pásová pila se dvěma pohyblivými bloky pil, které umožňují umístit jeden z nich za podávací systém a řezat pouze jednou pilou nebo posunovat dřevo pílou bez řezání, a to vše bez nutnosti demontáže pilového pásu. - Výrobce: Stenner Giedpfx Ajtp E Uzsbdjl - Model: VHET105 - Průměr řemenice pásu: 1050 mm - Šířka pilového pásu: 130 mm - Podávací rychlost: 10 – 80 m/min - Vzdálenost mezi pilami: 5 mm - Maximální vzdálenost mezi pilami: 400 mm