8,5 m² nerūdijančio plieno korpuso ir vamzdžio šilumokaitis

Schell Apparate 7880

Sąlyga: naudotas, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servomotor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60mm - Bending tools and bending dies interchangeable - Drive of the bending tool via AC servomotor and Alpha helical gearbox, planetary gearbox - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, Art. 014445 for hydraulic tool opening Ncedsd E A I Ijpfx Af Isl - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servomotor SIEMENS Type: 1FK6061-7AF71-1EG0 Nominal torque = M0: 6.4 Nm Nominal current = Io: 6.1 A Speed = max. n: 5500 rpm - Brushless permanent magnet servomotor SIEMENS ----- 5 pcs in right-hand version available. 5 pcs in left-hand version available. The quoted price refers to 1 unit of bending unit with servomotor. Individual components of the bending unit can be supplied on request. We also offer the electrical components for servomotor control. Hydraulic power units are also available.

Sąlyga: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Ncedpfx Aodzqblof Iol Folding machine for pre-bending sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Sąlyga: labai geros būklės (naudotas), Offered is a used solids pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Ncjdpfx Aehwnfcjf Iel

Sąlyga: naudotas, X ašies eiga: 6 000 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 4 500 aps./min, Įranga: sūkių greitis be galo kintamas, X-AXIS TRAVEL 6000 MM Y-AXIS TRAVEL 1800 MM Z-AXIS TRAVEL 1000 MM WORKTABLE DIMENSIONS 7300 X 1090 X H 900 MM SPINDLE NOSE MOUNT ISO 50 SPINDLE SPEED 0 - 4500 RPM AUTOMATIC INDEXING HEAD 2.5° X 2.5° CNC CONTROLLER SELCA 3045 PD EXTERNAL AND INTERNAL HIGH-PRESSURE COOLING TOOL CHANGER WITH 60 POSITIONS Ncedsv H D Exopfx Af Iel NO. 01 CNC-CONTROLLED DIVIDING HEAD

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Nedpjr Sxq Rjfx Af Iocl Model: GP250 Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 - Front bending aid (disassembled for transport) - DNC 900PS control unit All machine documentation is available.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2008, X ašies eiga: 4 000 mm, Y ašies eiga: 1 700 mm, Z ašies eigos atstumas: 1 500 mm, veleno greitis (min.): 6 000 aps./min, stalo plotis: 1 100 mm, stalo ilgis: 4 200 mm, sukimosi greitis (maks.): 6 000 aps./min, Heidenhain iTNC 530 valdymas Įrankių keitiklis 60 įrankių Automatinė universali galva, 0,02 laipsnio abiejose ašyse Įrenginys bus atnaujintas 2025 metais Njdpfxsw Ngd Ts Af Ijcl

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Ncedpfeu Ibvhex Af Iel Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Ncjdpfx Afepugwij Iol The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Decoiler MHR 250/4: Max. coil diameter: 1400 mm Nedpfsfn Aqmsx Af Iscl Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Sąlyga: labai geros būklės (naudotas), CAMU LTC 150 Sheet Straightener/Leveller Technical specifications: - Lateral feed guides - Max sheet width: 1,590 mm - Max sheet thickness: 5 mm - Rubber-coated entry rollers - 8-roller straightening unit - Shears with rotary disc blades: 4 upper and 4 lower - Control panel - Main motor: 5.5 kW Includes 4 sheet metal rollers/carts Dimensions: - Length: 1,900 mm Nodovkg Idjpfx Af Iscl - Height: 2,200 mm - Width: 1,400 mm Suitable for carbon steel, copper, small batch sizes, and frequent production changes.