Lakštinio metalo tiesintuvas

Prościarka-prostownica blach CAMU LTC 15 Prościarka-prostownica blach CAMU LTC 15

Sąlyga: labai geros būklės (naudotas), Swing diameter over bed: 1000 mm Distance between centers: 2000 mm Center height: 500 mm Swing diameter over cross slide: 700 mm Spindle bore: 128 mm Spindle speeds: 6.4–1,600 rpm Ffsdpfxjwhkdco Ab Sst SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 7 000 mm, bendras plotis: 4 000 mm, bendras aukštis: 3 130 mm, vidinis aukštis: 2 700 mm, vidinis ilgis: 6 900 mm, vidinis plotis: 3 900 mm, Įranga: kabina, An automotive spray booth is a fundamental piece of equipment in paint repair technology, enabling painting operations to be carried out in safe and comfortable conditions while minimizing their negative impact on the immediate surroundings and the environment. Specifications: - External dimensions: 7000x4000x3130 mm - Internal dimensions: 6900x3900x2700 mm - Entrance gate: 3000x2600 mm (three-leaf) - Service door: 640x1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7kW - Installation: indoor Spray booth wall design: - Thickness: 50 mm - Core: EPS polystyrene - Colour: white Spray booth base: - The booth is installed directly on the floor/screed - Installation strictly for indoor use only Double roof: - Upper external layer: - Corrugated sheet panels - Inner structure: - Partially latticed Air exchange system (supply air system): - Jet turbine 5.5kW – 1 unit - Capacity: 20,000 m³/h - Belt-driven - No air recirculation control Lighting (side lights): - 20 side lamps - No option for ceiling lighting installation Air heating system: Single-stage oil burner Riello G10, 54-120 kW - Manual burner control - warm-up time: 20 minutes Cabin access: Main door - Dimensions: 3200x2600 mm - 3-leaf main door system Service door - Booth equipped with a service door - Pressure locks Spray booth filtration: - Intake/inlet: Prefilter Ceiling filter: Main, high-throughput filter. Filter specifications: - Weight: 600 g/m³ - Thickness: 50 mm Ffedjxnbf Ujpfx Ab Sjt - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust retention: 650 g/m³ - Max. temp.: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Sąlyga: naudotas, Gamybos metai: 1995, Technical details: Sheet width: 1500 mm Sheet thickness: 1 mm Control system: Ducter 1500 Total power requirement: 2.0 kW CROSS-CUTTING LINE consisting of: decoiler, straightening machine, and shear Shear: - Cutting length: 1500 mm - Sheet thickness: approx. 1.0 mm - Operation via control panel and foot switch - Manual / automatic operation - Table size: 1530 x 400 mm - Rear gauge: adjustable travel 1300 mm - Dimensions (LxWxH): 1600 x 2000 x 1350 mm Straightening unit: Fsdpfx Aju Tp N Djb Sjft - Frame width: 1585 mm - Table size: 1700 x 700 mm with 1 fixed and 1 manually adjustable side stop - 2 feeder rolls, driven, Ø 50 x 1670 mm - Straightening rolls: 2 pairs of opposed draw rollers (2 top / 2 bottom), all driven, vertical adjustment travel 10 mm - Pass-through rollers: 3 top free-running (manual vertical adjustment 8 mm), 4 bottom driven, fixed - Dimensions (LxWxH): 1580 x 2050 x 1260 mm Decoiler: - Manual operation/handling - Expansion: max. Ø 520 mm - Dimensions (LxWxH): 550 x 800 x 1550 mm The machine is equipped with a manual counter. Accessories: - 1 spare blade (requires regrinding)

Sąlyga: naudotas, Gamybos metai: 2000, Techninės detalės: x eiga: 500 mm y eiga: 400 mm z eiga: 400 mm b ašis: rankiniu būdu nustatoma ° c ašis: rankiniu būdu nustatoma Valdymas: Heidenhain TNC 124 Įrankių magazinas: nėra tūtos tipas: SK40 Ffsdpsu Idffofx Ab Set Sukimosi greitis: 4500 aps./min. Bepakopis padavimo greitis X/Y/Z: maks. 14000 mm/min Greičio eiga: 5,0 m/min Stalo dydis: 700 x 500 mm Bendra galingumo poreikis: 17 kVA Staklių svoris apie: 2,91 t Staklių matmenys (IxPxA): apie 2,0 x 2,0 x 2,5 m CNC universalioji vertikali frezavimo staklės Staklės turi 5 ašis. B ir C ašys nustatomos rankiniu būdu su matavimo sistema. B ašis – stalas svyruoja nuo -10° iki +95°, C ašis – stalas sukasi 360° (neinterpoliuojama, galima pasirinkti rankiniu būdu per valdiklį) Aušinimo sistema (be siurblio) Valdymas per pasukamą ištraukiamą svirtį i.D.

Sąlyga: geras (naudotas), Lenkimo presas Gamintojas: AMADA Modelis: HFT 80/25 Galia: 2500 x 80T 4 ašys Atstumas tarp statramsčių: 1800 mm Matmenys: 3500 x 1500 x 2100 mm Svoris: 6 500 kg Įrengta naujais ir naudotais įrankiais Ffedpfewivddjx Ab Sst

Sąlyga: labai geros būklės (naudotas), Engel Victory 1350/220 Tech\nClamping Force: 220 tons\nYear of manufacture: 2004\nPlaten size (W x H): 860 x 830 mm\nScrew diameter: 55 mm\nInjection volume: 618 cm³\nControl system: CC 200\nMinimum mold installation height: 250 mm\nMaximum mold installation height: 730 mm Fodpfjpdrpzex Ab Seft

Sąlyga: naudotas, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servomotor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60mm - Bending tools and bending dies interchangeable - Drive of the bending tool via AC servomotor and Alpha helical gearbox, planetary gearbox Ffsdpjd E A I Iefx Ab Set - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, Art. 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servomotor SIEMENS Type: 1FK6061-7AF71-1EG0 Nominal torque = M0: 6.4 Nm Nominal current = Io: 6.1 A Speed = max. n: 5500 rpm - Brushless permanent magnet servomotor SIEMENS ----- 5 pcs in right-hand version available. 5 pcs in left-hand version available. The quoted price refers to 1 unit of bending unit with servomotor. Individual components of the bending unit can be supplied on request. We also offer the electrical components for servomotor control. Hydraulic power units are also available.

Sąlyga: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C4652, šlifavimo ilgis: 5 100 mm, šlifavimo plotis: 250 mm, bendras svoris: 9 100 kg, reikalingas aukštis: 2 300 mm, vietos reikalavimas ilgis: 9 000 mm, reikalingas plotis: 4 000 mm, Reform AR 51 Type 7 Surface Grinding Machine Year of manufacture: 1990 Grinding length: 5100 mm Grinding width: 250 mm Workpiece height: 220 mm Total power requirement: 36 kW Used water system Ffsdpfjtqtk Ajx Ab Sjt Transfer station, magnetic roller, pump

Sąlyga: naudotas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610mm in width, with an annual capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper Sheet Processing Section - 10T top decoiler with coil car - Roller and pinch feed - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Decorative pattern press - Upper roller forming machine (12 stands) - Upper steel frame for forming machine - Upper sheet guide 2. Lower Sheet Processing Section - 10T double bottom decoiler with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Roller conveyor - Operator desk for entry line 3. Panel Forming Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming cabin - Side sealing and tape applicator system Fsdpfx Abovtpcio Soft - Double-press conveyor - Double-belt heating system - Double-belt press - Outfeed roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Spacer-feeder polystyrene system - Infeed conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roll forming tools - Lower roll forming tools 6. List of Additional Machines - Station for containers: polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Technical Data: Sheet length: 4,100 mm Sheet thickness: 6 mm Distance between columns: - mm Total power requirement: 15 kW Weight approx.: 11.5 t Dimensions (LxWxH): 5250 x 2300 x 2215 mm Backgauge: 1000 mm D-Touch 7 Touchscreen CNC control, user-friendly central cutting angle adjustment Ball screw, 1000 mm & automatic swing-up Support balls on the table for improved material handling Side gauge with scale & T-slot and swing stop Support arms with T-slot and swing stop Fsdpfxjh Ib T Uo Ab Soft Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE-standard for EU The machines can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.