Užspaudimo ir apvadų tvirtinimo mašina

Schechtl MAX 310 CNC

Sąlyga: naujas, Gamybos metai: 2025, • efficient, quiet, and powerful mechanical machine • fast processes similar to MAX and MAB machines • maximum free space for material bending thanks to F geometry of the folding beam Credpfx Adelbilvsmjk • capability to produce omega profiles without additional tooling • 1 upper beam rail 20°, radius 1 mm, 66/24 mm • 1 bending rail 10/100 mm and 24/100 mm • foot pedal • soft start for bending beam • mechanical backgauge with working length 6-1000 mm • 32 A plug + 5 m power cable for EU • supply voltage: 3 x 400 V, 50 Hz for EU Bending capacity: 1.5 mm steel sheet for 3000 mm length

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by Codpfx Adeb Nrbnemjrk the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Sheet width: 3220 mm Sheet thickness: 2.0 mm steel Sheet thickness for stainless steel: 1.0 mm Upper beam adjustment: 160 mm Adjustment speed: 100 mm/sec Bending beam adjustment: 80.0 mm Codpoxnqwtjfx Admsrk Bending speed: 120 degrees/sec Backgauge – adjustable: approx. 10.0 – 2,000 mm Adjustment speed: 300 mm/sec Compressed air: 6.0 bar Working height: 869 mm Control: POS 2000 Total power requirement: 10.4 kW Voltage: 400 V Weight: 3750 kg Dimensions L-W-H: 4565 x 2950 x 2163 mm Current new price: approx. 150,000 Euro From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric-motor universal folding machine * High-precision mechanics with modern control technology * Suitable for single part and series production * Robust high-speed model with fast axis movement * Torsion-free welded steel construction - Rotating upper beam / automatic tool change system * With 2x tool stations (sharp and gooseneck bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel on front right (can also be operated with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Precise bending simulation * Operating system: Windows XP - Servo inverter-driven drives * For bending/upper beam and electric backgauge - CNC electric-motor lower beam adjustment - CNC electric-motor backgauge * Traverse path approx. 10 – 2000 mm * Traverse speed 300 mm/sec * With rear sheet support area (sheets made of stainless steel) - 1x movable double foot switch - Operating manual (PDF) Special accessories included: - 1x 30° upper tool sharp rail - 1x split set of upper tool gooseneck rails, H = 130 mm - 1x bending rail 10.0 mm - 1x bending rail 25.0 mm

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Credpfsqt Dmysx Admek Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Crodpfjcxxx Hjx Admok Total power requirement: 7 kW Machine weight approx.: 3.5 t

Gamybos metai: 2010, Sąlyga: paruoštas naudoti (naudotas), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, punching force: 300kN, X/Y travel: 2500mm/1525mm, X/Y travel with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Travel speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. 45 turret stations, auto-index stations: 2xB/2xC, turret speed: 30 rpm, strokes per minute: 1000, machine weight: approx. 21,000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34. Machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. An on-site inspection is possible. Crodpfx Aev Rp Tcsdmjk

Gamybos metai: 2019, Sąlyga: naujas, Preparation of a written quotation / cost estimate for a powder coating plant from Romer. Crodpfx Aoc Sd D Ssdmsk

Sąlyga: naujas, Gamybos metai: 2025, CIDAN Machinery manufactures longitudinal and cross-cutting systems that can be programmed and operated by both skilled and unskilled users. Our cut-to-length lines are all-in-one units designed to withstand high production volumes over time while occupying as little space as possible. CIDAN Machinery offers many of its advanced features as standard – straightening unit, sheet metal feeding guides, guillotine shears with hold-down devices and double-edged blades, feeding units, foot pedals for remote control, and much more. To provide the very best coil processing technology globally, Forstner – the worldwide leading brand for longitudinal and cross-cutting lines since 1960 – is now also part of the CIDAN Machinery Group. - Sheet from coil saves money, reduces sheet metal waste, and frees up storage space. - We have the right solution for every production scale! - Coil processing frees up space, increases productivity, and boosts your profitability! - The extensive Forstner product range can be flexibly combined into an efficient production line that fits your requirements. Parameters such as line performance, material removal, and time needed to access material are crucial factors for rapid and cost-effective production. Crjdpfxomfrgrj Admsk - With our solutions, you can easily process coils from 500 kg up to 8 tons. Larger coils mean fewer changeovers, less waste, and a more efficient processing cycle. - Need quick access to many different materials at all times without extensive retooling? A multi-decoiler system allows you to have up to eight different materials ready for processing at any time, and coil changes are completed much faster. - With one of our well-equipped longitudinal and cross-cutting systems, there’s no longer any need to cut sheet strips separately with a guillotine shear. - Whether you sell cut-to-size sheets or rewind sheet metal from larger to smaller coils – we have the right solution for your needs! - Efficient coil handling shortens lead times, creates production space, and reduces capital tied up in inventory.

Sąlyga: naujas, Gamybos metai: 2025, We are a manufacturing company that continues to develop dynamically thanks to the professionalism and commitment of our employees. With the experience we have gained, we are able to offer the best and highest-quality solutions in the field of production. Folding Machine ZGR – 4140 mm 0.8 mm - Working length: 4140 mm - Bending capacity: up to 0.8 mm (steel sheet) Csdpoch Tkvofx Admjrk - Bending angle: max. 150 degrees - Bending beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Upper bar lift in three positions Equipment: - Roller shear 0.8 + 350 euros - Angle scale - Angle stop - Rear support frame for holding sheet metal Price: 7,200 euros Shipping: 500 euros to Germany and Austria Please contact us if you are interested.

Sąlyga: paruoštas naudoti (naudotas), AMADA PROMECAM Guillotine Shear 3000 x 6 Model: GPX 630 Capacity: 3000 x 6 mm Maximum stroke: 160 mm Stroke rate: 16 to 45 strokes/min Shearing angle: 40' to 2°20' Backgauge travel: 1000 mm Crsdjvt Svrspfx Admsk Motor: 15 kW Approx. weight: 6,500 kg Overall dimensions: 3750 x 2000 x 1850 mm