CNC tekinimo staklės
Schaublin 125-CCN R-T A2-4

Name: Schaublin 125-CCN R-T A2-4
Brand: Schaublin
Availability: InStock

Gamybos metai

2002

Sąlyga

Naudotas

Vieta

Bienne

CNC tekinimo staklės Schaublin 125-CCN R-T A2-4

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: CNC tekinimo staklės

Gamintojas:: Schaublin

Modelis:: 125-CCN R-T A2-4

Serijos Nr.:: 350523

Gamybos metai:: 2002

Sąlyga:: visiškai atnaujintas (naudotas)

Funkcionalumas:: visiškai funkcionalus

Darbo valandos:: 2 500 h

Kaina ir vieta

Vieta:: Rte de Soleure 145, 2504 Bienne, Suisse

Skambinti

Techniniai duomenys

Įranga:: CE žymėjimas

Pasiūlymo informacija

Sąrašo ID:: A20951557

Nuorodos Nr.:: 2230041

Naujinta paskutinį kartą:: Data 2026.01.14

Aprašymas

Voltage: 380V
Net weight: 1,400 kg
Customs tariff number: 8458.1120
Dimensions: 180 x 128 x 172 cm

TECHNICAL SPECIFICATIONS

CAPACITIES
Maximum turning diameter: 270 mm
Maximum diameter over cross slide: 115 mm
Center height over cross slide: 60 mm
Turning length B32: 265 mm
Center height above floor: 1,162 mm

HEADSTOCK A2-4 / Camlock D1-3’’
Spindle for collets Schaublin Hainbuch / F38 / B32
Spindle speed: 50 – 5,000 rpm
AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW
AC motor drive – continuous/intermittent torque: 42 / 58 Nm
Spindle bore (without clamping key): 39 mm
Maximum bar capacity with collet: 32 mm
Maximum bar capacity with automatic chuck: 32 mm

PNEUMATIC CLAMPING
Adjustable axial clamping force, force at 5 bar: 1,150 daN

CROSS SLIDE
Transverse travel, X-axis: 190 mm
Resolution, X-axis (radial): 0.0005 mm
AC motor drive – continuous/intermittent torque: 4 / 14 Nm
Ball screw, Ø x pitch: Ø 20 x 5 mm
Longitudinal travel, Z-axis: 390 mm
Resolution, Z-axis: 0.001 mm
Rodpfx Agsx Upugjiep
AC motor drive – continuous/intermittent torque: 4 / 14 Nm
Ball screw, Ø x pitch: Ø 32 x 5 mm

FEEDS
Working feed, X and Z axes, stepless: 0 – 5 m/min
Rapid traverse, X and Z axes: 8 m/min

REVOLVER TOOL SYSTEM
Standard tool holder interface: VDI 20
Number of fixed/rotating tool stations: 8 / -
Max. tool size: 16 x 16 mm
Integrated coolant supply and bi-directional indexing: Yes

COOLANT
Tank capacity: 55 L
Pump capacity: 10 L/min
Pump pressure: 1.7 bar

PNEUMATIC TAILSTOCK
Quill taper: MT3
Quill outer diameter: 45 mm
Quill stroke: 70 mm
Adjustable thrust force: 25 – 260 daN

All technical data is provided without obligation and subject to errors or omissions.

Fully overhauled:
Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced)

Headstock:
Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint.

Turret:
Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed.

Tailstock:
Disassembled, inspected, and overhauled. Newly painted.

Hydraulics and pneumatics:
Disassembled, motor checked, hoses and worn/defective parts replaced.

X-axis:
Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed.

Z-axis:
Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed.

Electrical cabinet:
Completely checked, various relays replaced.

Paint:
Colors: White RAL 9003 and Grey RAL 7011

Geometry in accordance with manufacturer's protocol.

Various accessories checked and cleaned.
Year: 2002

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2014

50 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+41 32 34... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Trijų ašių apdirbimo centras Hedelius Hedelius BC 100 Magnum

Babberich

1 224 km

Trijų ašių apdirbimo centras Hedelius
HedeliusBC 100 Magnum

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 3 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 770 mm, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, stalo plotis: 1 000 mm, stalo ilgis: 4 150 mm, stalo apkrova: 4 000 kg, 3-Axis Machining Center Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Rodpswycmmefx Agiop X-axis feed rate: 30,000 mm/min Y-axis feed rate: 30,000 mm/min Z-axis feed rate: 30,000 mm/min Tool holder: ISO 50/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Peržiūrėti detales

Mažas skelbimas

Automatinės tekinimo staklės STAR MICRONICS SV 12

Vokietija

1 260 km

Automatinės tekinimo staklės
STAR MICRONICSSV 12

Skambinti

Sąlyga: naudotas, Gamybos metai: 2003, Technical details: Bar diameter: 13 mm Turning length: 205 mm Spindle speed: 12,000 / 12,000 rpm Number of tools: 29 Driven tool stations: yes / 19 Control unit: FANUC 16 iT Total power requirement: 9 kVA Machine weight approx.: 1.7 t Required floor space approx.: 2.7 x 1.4 x 1.7 m CNC Swiss-type lathe Sub-spindle, 9 axes (X / C1 / Y / E / B / A / X / C2) Main spindle, max. speed 12,000 rpm, C-axis Sub-spindle with collet chuck, max. speed 12,000 rpm, C-axis 4-position tool holder 3 cross-drilling units Turret with 8 stations Various additional tool holders, quills Kraft und Bauer extinguishing system High-pressure system SF-Systeme Büchele / SHD 150 / 150 bar / 2 x 40 μm / 3 valves Parts conveyor belt Operating manuals (operation/programming/electrics/spare parts) Machine operating tools Up to 29 turning tools and up to 19 driven tools possible 9.0 kVA Tank capacity 170 L Rsdpfx Agsvivygoiop Bar feeder FMB Turbo 2-16 / 3200 / A / for Ø2-Ø20 mm Coolant used by the machine: oil Machine dimensions: approx. 2700 x 1400 x 1700 [mm] Machine weight: approx. 1700 [kg] Bar feeder dimensions: approx. 4300 x 600 x 1800 [mm] Bar feeder weight: approx. 700 [kg] Dimensions of peripheral high-pressure system: approx. 1500 x 500 x 1000 [mm] Weight of peripheral high-pressure system: approx. 250 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg]

Peržiūrėti detales

Mažas skelbimas

Zuchwil

1 437 km

Poliravimo mašina
IMM72780

Skambinti

Sąlyga: labai geros būklės (naudotas), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has barely been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Rjdpfxou Hanyj Agijp Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Peržiūrėti detales

Mažas skelbimas

CNC štampavimo mašina Amada EMK 3610 NT/MP300 M

Vokietija

999 km

CNC štampavimo mašina
AmadaEMK 3610 NT/MP300 M

Skambinti

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), A CNC turret punching machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools, is available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet size X/Y: 3000 mm / 1500 mm, max. sheet thickness: 6.35 mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/-0.1 mm, machine dimensions X/Y/Z: approx. 5100 mm / 3200 mm / 2300 mm, weight: approx. 18,000 kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet size X/Y: 3000 mm / 1500 mm, min. sheet size X/Y: 1000 mm / 300 mm, sheet thickness range: 0.8 mm – 6 mm, max. load capacity per pallet: 3,000 kg, max. stack height: 400 mm, max. sheet weight: 170 kg, max. pallets: 9, pallet change time: 25 s, sheet loading time: 18 s, weight: approx. 4,900 kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. Inspection on site is possible. Rsdpfx Aowhp N Djgijp

Peržiūrėti detales

Mažas skelbimas

Suvirinimo įrenginys FRONIUS TPS 5000 MIG MAG PULS TRANS PULS SYNERGIC 5000 / 500 MASCHINE

Wien

938 km

Suvirinimo įrenginys
FRONIUS TPS 5000 MIG MAG PULSTRANS PULS SYNERGIC 5000 / 500 MASCHINE

4 790 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. Rsdpfx Agowbh Ifsijp ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo staklės SCHAUBLIN 125-CCN R-T

Jonschwil

1 338 km

CNC tekinimo staklės
SCHAUBLIN125-CCN R-T

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 1997, sukimosi skersmuo virš skersinio stumduko: 60 mm, veleno skylė: 24 mm, ašies variklio galia: 7 500 W, sukimosi greitis (min.): 30 aps./min, sukimosi greitis (maks.): 5 000 aps./min, bendras aukštis: 1 660 mm, bendras ilgis: 1 700 mm, bendras plotis: 1 240 mm, bendras svoris: 1 420 kg, CNC tekinimo staklės su spaustuvo patronu F38 Didžiausias tekinimo skersmuo Ø 200 mm, eigų ilgiai X/Z 180/255 mm, įrankių bokštelis SAUTER 8 pozicijų VDI20 (16x16 mm), velenas 7,5 kW, veleno galas A2-4, sūkių diapazonas 30-5000 aps./min., strypo pravedimas Ø 32 mm, tuščiaviduris veleno atmušas, valdymas FANUC Series T-20, vadovai Rodpsvu Tvpofx Agisp

Peržiūrėti detales

Mažas skelbimas

CNC šveicariško tipo tekinimo staklės TSUGAMI B0205E-III

Contamine-sur-Arve

1 588 km

CNC šveicariško tipo tekinimo staklės
TSUGAMIB0205E-III

Skambinti

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 Rjdpfouhbbzsx Agisp - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total power consumption: 11 kVA DIMENSIONS AND WEIGHT - Footprint: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE RUNNING HOURS - Operating hours: 13,837 h EQUIPMENT - CNC control: Fanuc Oi-TD - 3-color status lamp - Powered guide bushing - Part removal device - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire suppression system * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Electrical transformer

Peržiūrėti detales

Mažas skelbimas

Tipton

1 719 km

CNC staklės
NAKAMURA TOMESUPER NTJ

Skambinti

Sąlyga: naudotas, Gamybos metai: 2003, NAKAMURA TOME SUPER NTJ frezarka CNC PRODUCENT: NAKAMURA TOME, JAPONIA MODEL: SUPER NTJ ROK PRODUKCJI: 2003 STEROWANIE: FANUC 18 iT B UCHWYT: 210,0 mm MAKS. ŚREDNICA TOCZENIA: 200,0 mm ODLEGŁOŚĆ MIĘDZY KIEROWNICAMI: 780,0 mm ŚREDNICA RURY PRZELOTOWEJ: 80,0 mm POSUWY: - OŚ X: 750,0 mm - OŚ Z: 130,0 mm Rjdpfev I Tx Rex Agiop WIEŻA NARZĘDZIOWA: 2 x 12 pozycji PRĘDKOŚĆ OBROTOWA WRZECIONA: do 5.000 obr./min PRZELOT WRZECIONA: 65,0 mm NOS WRZECIONA: A2-6 DODATKOWO: - CNC podajnik prętów krótkich - Wieża narzędziowa - Przenośnik wiórów - Dokumentacja / instrukcje obsługi

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo staklė DMT KERN - CD 322 DMT KERN CD 322

Babberich

1 224 km

CNC tekinimo staklė DMT KERN - CD 322
DMT KERNCD 322

Skambinti

Mažas skelbimas

Vertikalus apdirbimo centras Mazak VTC Hauptspindel Spindel

Norken

1 180 km

Vertikalus apdirbimo centras
MazakVTC Hauptspindel Spindel

Skambinti

Sąlyga: visiškai atnaujintas (naudotas), Parduodama atnaujinta Mazak pagrindinė galvutė VTC 200 arba VTC 300. Velenas buvo visiškai atnaujintas, pakeisti veleno guoliai ir tarpiniai įvorės. Kūgis nušlifuotas iš naujo. Vėliau velenas subalansuotas. Didžiausias apsisukimų skaičius – 12 000 aps./min. Sandėlyje turime ir daugiau atnaujintų Mazak velenų, laukiame jūsų užklausų. Tai - keičiamas velenas, todėl būtina pateikti seną dalį. Dėl papildomos informacijos maloniai prašome kreiptis. Rodpfxsvdkdij Agiep

Peržiūrėti detales

Reklamuokite čia