Stiklo karoliukų pjūklas

Schüco PGZ 45 90

Būklė: visiškai atnaujintas (naudotas), spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 700 mm, paskutinio kapitalinio remonto metai: 2026, Pleištinių dantukų presas Pleištinių jungčių ciklinis presas Iedpfx Anet Sc Swegobb Presavimo jėga 10 t Hidraulinis pleištinių dantukų ciklinis presas Medžio plotis 80 - 300 mm Medžio storis 18 - 100 mm PASIRINKIMAI Su 300 l hidraulikos agregatu ir 5,5 kW varikliu, gamintojas GOD Su elektrine įranga

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Ibodpopiarnjfx Angob Please inquire about your crane runway with required load moment and dimensions.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, 5 AŠIŲ DAŽYMO ROBOTAS CMA MOD. ROBY 5EX-R - NAUDOTAS - 5 valdomos ašys - 3 laikikliai - Riešo keliamoji galia 3 kg - Programavimas automatiškai mokantis Karuselė * Svirčių skaičius: 3 * Vienos svirties keliamoji galia: 25 kg Detalės sukimasis * Servovarikliu valdomas ir sinchronizuotas judėjimas - Komplektuojamas su vadovu ir CE deklaracija RETROFIT 2024 (PILNA ATNAUJINIMAS) Iodpot U Ngasfx Angsbb

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, Funkcionalumas: visiškai funkcionalus, • Used for milling lock handle holes, hinge, espagnolettes slots, and custom-sized channels in aluminum and plastic profiles • Copy template suitable for your specific operation • Ability to mill various channels independently from the copy template using positioning stops OPTIONS • Lower cabinet system • Pneumatic system Ibedpfx Ajrcm D Dengeb

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, • Complies with CE standards. • Allows for the machining of lock positions, hinge slots, handle holes, and drainage channels on aluminum and PVC profiles. • Copy head operates on the vertical axis. Ibodpferamz Hsx Angjb • Triple drilling unit operates on the horizontal axis. • Drainage system can operate at an angled position. • Universal template provides custom template options upon request. • Triple drilling, copy routing, or channel opening system can be operated independently. • High-frequency motor (18,000 rpm). • Right conveyor system (1 meter).

Būklė: naudotas, mašinos/transporto priemonės numeris: 007928, Pozicija 1: Šepetėlinė mašina CEFLA-EASY 2000 + TR2V-FV3 Ibodpfewu Ackjx Angsb Pozicija 2: Lako dengimo mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Lako džiovintuvas CEFLA-EASY 2000 + TR2V-FV3

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Isdpfx Aevwbp Ajngsbb

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Maszyna do osadzania kołków z pistoletem operacyjnym do jednoczesnego nakładania kleju i wprowadzania kołków. Standardowe kołki Ø8 mm Długość kołków: 25–80 mm Nominalna wydajność: 1 kołek/sekundę (wraz z aplikacją kleju) Stosuje kleje PVA na bazie dyspersji wodnej o lepkości 200–400 mPa 1 szt. zbiornik na klej o pojemności 8 kg Ijdpfx Ajqu N U Dsngebb 1 szt. zbiornik na wodę o pojemności 8 kg Maksymalne ciśnienie: 5 bar

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Iedpfxsiidm Ne Angjbb Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 020 mm, statybinis aukštis: 410 mm, kėlimo aukštis: 600 mm, tuščias svoris: 150 kg, keliamoji galia: 350 kg, bendras ilgis: 1 900 mm, bendras plotis: 740 mm, garantijos trukmė: 24 mėnesiai, NIVEAU – Lift Table HS 350 Large without worktop Description: > Mobile scissor lift table with double horizontal scissors, basic version without worktop; equipped with a base frame for the installation of various worktops; 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Load capacity (kg): 350 Weight (kg): 150 Effective lift (mm): 610 Closed height (mm): 400 Max. height (mm): 1010 Platform size (mm): 1900 x 740 Ibsdpfx Ash A Hxiengob