Standartinis-SZM

Scania R580 V8 6X4 TREKKER/TRACTOR/SZM MET EFFER 315/6...

Sąlyga: labai geros būklės (naudotas), rida: 289 940 km, galia: 427 kW (580,56 AG), kuro tipas: dyzelinas, spalva: sidabras, ašių konfigūracija: 6x4, padangos dydis: 385/65/22.5, kuras: dyzelinas, stabdžiai: variklio stabdymas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, Gamybos metai: 2016, veikimo valandos: 5 184 h, Įranga: ABS, autonominis šildytuvas, diferencialo užraktas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, suodžių filtras,

Sąlyga: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0401-230047, The FICEP Tipo G31 plate processing center is designed for the efficient machining of steel plates and flat steel in steel construction and steel trade sectors. The Ficep Tipo G31 LG can carry out drilling, center punching, thread tapping, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting on flat steel or sheet plates with a maximum plate width of 3,100 mm and a plate length of up to 14,000 mm—all in a single machine. This CNC-controlled plate processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool change. The system is suitable for sheet sizes: plate width minimum 200 mm, maximum 3,100 mm; plate length minimum 2,500 mm and maximum 14,000 mm. For plasma cutting, a powerful and modern Hypertherm HPR 400 XD plasma source is available. In addition, the machine is equipped with an oxy-fuel cutting unit for thick material cross-sections. Ijdpfx Aforr Sqlswja The drilling unit, featuring high torque and spindle speeds of up to 6,000 rpm, is designed for carbide tooling such as solid carbide drills, Nenok Multiplex indexable insert tools as well as HSS coolant channel drills in drilling diameters from 10 mm to 40 mm. The Ficep Tipo G31 system is in very good condition and has only a few operating hours.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: 35313, Ficep Rapid 35T automatinė gręžimo ir pjovimo linija Automatinė CNC didelio greičio gręžimo ir pjovimo linija kampiniams profiliams / kampams: RAPID 35T Kampinio profilio matmenys (410 N/mm²) (min. mm): 60x60x6 Kampinio profilio matmenys (410 N/mm²) (maks. mm): 350x350x40 Gręžimo galvutės (vnt.): 2 Ijdpfx Ajt Nzlqjfwsa Grąžtai kiekvienai galvutei (vnt.): 3 (6) Gręžimo skersmuo (mm): 40 Veleno galia (kW): 19 (27) Maksimalus veleno greitis (aps./min.): 3500 Veleno papild. eiga (mm): 200 Pjovimo mazgas: diskinis pjūklas Šiai linijai įvado ir išvado ilgiai: Įvadas: 16 m Išvadas: 12 m Dėl papildomų nuotraukų ar informacijos kreipkitės į mus.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m Ijdpofg E Hlsfx Afwoa SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens Isdpfxjd Iipme Afwea

Sąlyga: naujas, Cutting Range: - Round 0°: 170 mm - Square 0°: 150 x 150 mm - Flat 0°: 150 x 190 mm - Round 45°: 125 mm - Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H, approx.): 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow swivels up to 45° - Equipped with two blade speeds for optimal adjustment to the workpiece Iodpfx Afoilk H Tewea - Ideal for cutting pipes, profiles, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for low-vibration operation - Hydraulic lowering of the saw arm via hydraulic cylinder - Low-noise operation thanks to robust design - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2080 x 20 x 0.9 mm, 6/10 TPI - Blade tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off at end of cut - Base frame

Gamybos metai: 2009, Sąlyga: geras (naudotas), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Ijdpfx Afeqiz N Rewoa

Sąlyga: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced, CNC-controlled notching and cutting system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location via a pull-type clamp measuring carriage on the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The finished cut or notched components either fall into a collection tray or are pushed out of the system by the measuring arm. Isdpfx Afotwm Ubswsa Thermal cutting units: The Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting with oxy-fuel and/or plasma. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD is used, suitable for material thicknesses up to 32 mm. Thicker materials or bevel cuts exceeding 32 mm are processed using the oxy-fuel cutting unit. Transport system: On the infeed side, ahead of the Ficep Flex FRC notching system, there is a chain drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported on a sturdy roller conveyor into the machine using a clamp measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a roller conveyor width of 1,300 mm on both the infeed and outfeed sides. For removal of finished components on the outfeed side, there are four chain drag transverse conveyors, each 6,450 mm long, installed after the notching system. Mitrol CNC control and Pegaso Software: The system is operated using a modern CNC control unit from Mitrol. This reliable CNC control is developed by Ficep’s in-house manufacturer Mitrol and includes Pegaso software with remote maintenance capability and a data transfer interface. Torit DCE Filter Unit: The dust extraction filter unit is supplied by Donaldson Torit DCE. Safety: via fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11383, įvesties srovės tipas: trifazis, darbo diapazonas: 3 000 mm, bendras svoris: 17 000 kg, įėjimo įtampa: 400 V, pjovimo greitis: 2 000 mm/min, bendras plotis: 4 500 mm, bendras aukštis: 5 500 mm, bendras ilgis: 22 400 mm, vėžės plotis: 1 400 mm, kartojimo tikslumas: 1 mm, ruošinio svoris (maks.): 30 000 kg, garantijos trukmė: 6 mėnesiai, įėjimo dažnis: 50 Hz, atviros grandinės įtampa: 400 V, aplinkos temperatūra (maks.): 45 °C, Gebrauchte SPC3000 - HGG Profiling Equipment B.V. Sind Sie bereit, Ihren Workflow zu automatisieren, möchten aber keine große Investition in Rohrschneidmaschinen tätigen? Dann haben wir ein interessantes Angebot für Sie: Diese Rohrschneidmaschine SPC3000 (Baujahr 2014, 40 Tonnen) ist äußerst vielseitig einsetzbar. Die Maschine kann Rohre mit einem Durchmesser von 300 mm bis 3.000 mm schneiden und verfügt über zahlreiche Zusatzfunktionen: • 4x 10-Tonnen-Rohrfahrwerke (300–2.500 mm Außendurchmesser), davon eines angetrieben • 2x 20-Tonnen-Rohrauflagen (2.500–3.000 mm Außendurchmesser) • Plasma-Markiersystem Kjellberg Finemarker • Stempelmarkierungssystem • Geeignet für 18 Meter lange Rohre • Plasma-Schneidsystem Kjellberg FF450 • Autogen-Schneidverfahren Ijdpfx Afsri Slmowsa • Zusätzliches Touchscreen-Fernbedienpult am Hauptantrieb • 3-Punkt-Absauganlage für Rauchgas Die SPC3000 wird in unserem eXperience Center eingesetzt und von unseren besten Technikern am Hauptsitz in den Niederlanden gewartet. Die Maschine hat sich bewährt und wird zum Profilieren von Rohren für Kunden aus anspruchsvollen Branchen wie Offshore, Rohrleitungsbau, Stahlbau und dem Schiffbau eingesetzt. Zahlreiche Spezialprojekte wurden bereits auf dieser Maschine realisiert.

Sąlyga: paruoštas naudoti (naudotas), bendras ilgis: 900 mm, bendras plotis: 400 mm, bendras aukštis: 1 100 mm, tuščias svoris: 140 kg, dujų vamzdis: Ø50 x 3,91 mm plieninis vamzdis: Ø60 x 3 mm nerūdijančio plieno vamzdis: Ø60 x 2 mm varinis/aliumininis vamzdis: Ø64 x 4 mm pilnaviduris strypas: Ø35 mm pilnaviduris stačiakampio formos strypas: 60 x 10 mm plokščias strypas (kietas): 60 x 16 mm plokščias strypas (lengvai lenkiamas): 60 x 30 mm stačiakampis profilis: 60 x 30 x 4 mm Ijdpfexllirsx Afwsa maksimalus spindulys: 200 mm lenkimo greitis: 1,25 - 2,5 aps./min vaizdo įrašas spauskite čia Variklio galia: 1,5 kW