Sraigtinis kompresorius

Atlas Copco GA 55 VSD FF

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 29 000 h, inverterinis kompresorius su integruotu džiovintuvu techninės charakteristikos maksimalus slėgis: 13 bar galia: 55 kW / 75 AG Nwjdpsxl Tpyjfx Agioc našumas: 9960 litrų/min naujo kompresoriaus dabartinė kainoraščio kaina: 94.655 €

Sąlyga: paruoštas naudoti (naudotas), Max. operating overpressure: 11 bar, motor speed: 2945 rpm, rated power: 30 kW, operating hours: 67,212 h. Nwodjl Eyq Ropfx Agiec

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 32 278 h, Funkcionalumas: visiškai funkcionalus, Sraigtinis kompresorius Atlas Copco GA55VSDFF. 55 kW, 13 bar ir 10,51 m3/min. Integruotas džiovintuvas ir dažnio keitiklis. Nsdpfeya Dp Iex Agiowc

Sąlyga: geras (naudotas), Gamybos metai: 2013, bendras svoris: 1 519 kg, galia: 75 kW (101,97 AG), tūrio srautas: 14,85 m³/val, slėgis (maks.): 12,8 juosta, Atlas Copco GA75VSD FF oro kompresorius Techniniai duomenys Gamintojas: Atlas Copco Airpower Tipas: GA75VSD FF Pagaminimo metai: 2013 Maksimalus slėgis: 12,8 bar Našumas: 14,85 m³/min Variklio galia: 75 kW Variklio apsukos: 3000 aps./min. Svoris: 1519 kg Maitinimas: 400 V 50 Hz 3 fazės Konstrukcija: alyva įpurškiamas sraigtinis kompresorius Valdymas: elektroninis valdymo pultas Nwodpfxoxk U Als Agisc Kilmė: pagaminta Belgijoje Nesuteikiama jokia garantija dėl pateiktos informacijos tikslumo, išsamumo ar naujumo.

Sąlyga: naujas, Delivery pressure 11 bar Suction capacity 480 cm³ Flow rate 360 Tank capacity 270 l / bar Njdsvkizgepfx Agiewc Number of cylinders 1 pc. Motor 400 Volt / 3.0 kW V / kW Speed 892 rpm Machine weight approx. 200 kg Dimensions (L x W x H) 1.6 x 0.7 x 1.2 m

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 125 h, keliamoji galia: 230 kg, tuščias svoris: 7 600 kg, statybinis aukštis: 2 530 mm, kuro tipas: dyzelinas, bendras ilgis: 7 770 mm, pavaros tipas: Diesel, rankos pasiekiamumas: 10 600 mm, statybos plotis: 2 300 mm, darbinio aukščio: 17 650 mm, Articulated Boom Lift Transmission: Hydrostatic Condition: As new Technical Condition: Very good Nodpfx Aoupauqjgiowc Front Tyre Type: Solid rubber Front Tyre Size: 18 Front Tyre Condition: 80 - 100% Rear Tyre Type: Solid rubber Rear Tyre Size: 18 Rear Tyre Condition: 80 - 100% Description: The articulated platform 180 ATJ offers a lifting capacity of 230 kg at a working height of 18.19 m. It meets all requirements for outdoor operations on uneven, sloped, and congested terrain. Its off-road capability makes it the ideal work partner for jobsites with rough ground conditions. Thanks to the new gradual hydraulic speed regulation, both noise levels and fuel consumption are reduced. As with other engine-powered work platforms, the 4-wheel drive and 3 steering modes facilitate machine maneuvering and positioning even on cluttered or confined jobsites. The design of the control console provides a clear work environment for fast handling and immediate productivity. 230 V generator and sockets in the basket, SMS Safe Man System

Sąlyga: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 100 000 h, slėgis (min.): 10 juosta, slėgis (maks.): 10 juosta, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally pre-piped and pre-wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20°C Relative humidity 0% Usable flow rate at the outlet of the compact unit at operating overpressure of 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Motor rated power: 18 kW Motor rated speed: 4867 rpm Shaft power requirement at maximum operating pressure: 24 kW Shaft power requirement in idle mode: 5.6 kW Compressed air temperature after dryer: 23°C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions Nwjdpeu Rptyjfx Agijc

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 9207102, Offer 12001 Technical Data: - Material thickness: 1.25 mm - Max. throat depth: 180 mm Njdsi Hpmtspfx Agiowc - Roller center distance: 63 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Working speed approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Space requirement approx.: W 550 x H 1250 x D 1000 mm - Weight approx.: 120 kg - Includes: - Electric foot switch

Sąlyga: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW Nsdpfxemiik To Agijwc - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm

Sąlyga: naudotas, Gamybos metai: 2000, Table length: 1160 mm Table width: 710 mm Clearance: 650 mm Control: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirements approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Model: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer _____ Y-axis configured as a longitudinally movable measuring portal: 600 mm X-axis as a transverse measuring head carriage: 500 mm Z-axis as a vertical measuring spindle approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under the measuring portal approx.: 650 mm Usable table size approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, traverse, and spindle made of dark natural granite; table with 3 x 4 threaded holes for attaching workpieces/fixtures • All axes are air-bearing, providing smooth operation and virtually wear-free mechanics, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC Control Type ME 5007 for 3 to 6 axes with ME 4700 movable hand control console with 2 joysticks for accessing all software functions. Ideally equipped for: • WENZEL measuring software METROLOG–II Level 2 for standard geometry measurements, 3D graphical workpiece representation, graphic reports, etc. Including keyboard • RENISHAW control unit Model PHC 10–2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, incl. RENISHAW Probe Interface PI 200 Nsdpfx Aget Hw S Isiowc • Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on the table • Reference sphere for table setup, work table with console, various clamping devices • Various cassettes and CDs with various software. Separate PC for measuring software, printer Condition: Very good – generally in stock under power, available for inspection and demonstration. Dismantled by a specialist and reassembled here. Delivery: ex stock – as is, as inspected Payment: Net – upon receipt of invoice.