Kablio rankenos sistema

Scania R520 V8 6x2/4 / EPSILON CRANE + HOOKLIFT

Gamybos metai: 2003, būklė: naudotas, Bollegraf kūjinis malūnas AS 75/850 Pagaminimo metai: 2003 Galia: Pritaikymas: Įvado skerspjūvis: Rotorius- Rotoriaus plotis: 850 mm Kaina: 24.500 eurų Bwsdpfxsg T Id Nj Aahei Kontaktinis asmuo: ponas Rainer Eckerle

Būklė: naujas, Gamybos metai: 2026, Drum Chipper Series ATH 300 Bwsdpfx Aouz Hmxsahsi S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Būklė: labai geros būklės (naudotas), kuro tipas: elektrinis, spalva: žalia, Gamybos metai: 2015, veikimo valandos: 25 987 h, Year of manufacture: 2015 Unladen weight: 30,000 kg Mast length: 13 m Technical condition: very good Optical condition: very good Price: On request Serial number: 825.7.2315 Please contact Ferdinand Pater for further information. Color: Green Bwodot Dlv Nepfx Aahei Mast length: 13 m Stock No. D19 Machine Make: Sennebogen Model: 825AE-D Series Weight: 30 tons Serial number: 825.7.2315 Year of manufacture: 2015 Operating hours: 25,982 Engine: Electric motor 400V 110kW Boom: K13 boom configuration, 7.5 meter boom, 5.8 meter stick Cab: Maxcab Industry, hydraulic cab elevation, 2.7 m high with platform walkway at the cab, additional 320x270mm window in the cab floor Uppercarriage: Standard Sennebogen paint, centralized lubrication system, hydro-clean filter Undercarriage: Sennebogen ST20, 400x400 including 2x 5-ton additional counterweights, 1 meter additional pylon Lighting: Multiple (LED) lights on boom, stick and cab Extras: The machine is equipped with a brand new original Sennebogen slewing ring, serviced, clean, and ready for operation.

Būklė: naujas, galia: 44 kW (59,82 AG), Gamybos metai: 2025, Ein Doppelrotor-Hammerbrecher ist eine Art Brecher, bei dem zwei Rotoren auf einer gemeinsamen Welle montiert sind und so zu einem rotierenden Rotor kombiniert werden. Die Doppelrotoranordnung erhöht die Zerkleinerungsleistung und sorgt im Vergleich zu Einrotor-Brechern für eine effizientere und zuverlässigere Konstruktion. Bwedpfx Ajq Nf Ensahji Hier sind einige zentrale Merkmale und Aspekte eines Doppelrotor-Hammerbrechers: 1. Zwei Rotoren: Wie der Name schon sagt, verfügt der Brecher über zwei Rotoren, die sich auf einer gemeinsamen Welle in entgegengesetzten Richtungen drehen. Diese Doppelkonfiguration sorgt für mehr Aufprall- und Zerkleinerungskraft. 2. Hohe Kapazität: Durch das Doppelrotor-Design kann der Brecher größere Aufgabegrößen und eine höhere Durchsatzleistung im Vergleich zu Einrotor-Brechern bewältigen. Er eignet sich für das Zerkleinern von Materialien mit hoher Härte und großen Körnungen. 3. Vielseitigkeit: Doppelrotor-Hammerbrecher sind vielseitig einsetzbar und können unter anderem zur Zerkleinerung von Kalkstein, Gips, Kohle sowie ähnlichen Materialien in der Bergbau-, Zement- und Baustoffindustrie verwendet werden. 4. Prallzerkleinerung: Der Hauptmechanismus der Zerkleinerung in einem Doppelrotor-Hammerbrecher ist der Aufprall der Hämmer auf das Material. Das Aufgabegut wird in den Brecher eingezogen; die schnell rotierenden Hämmer treffen auf das Material und zertrümmern es. 5. Einstellbare Spaltweiten: Diese Brecher verfügen meist über einstellbare Spaltweiten zwischen den Rotoren und den Prallleisten, sodass die Endkorngröße reguliert werden kann. 6. Langlebigkeit: Die robuste Konstruktion des Doppelrotor-Hammerbrechers sorgt für eine hohe Langlebigkeit und ermöglicht auch den Dauerbetrieb mit anspruchsvollen Materialien. 7. Geringerer Verschleiß: Durch die Doppelrotoranordnung wird der Verschleiß auf Hämmer und Verschleißteile gleichmäßiger verteilt, was potenziell die Gesamtlebensdauer des Brechers verlängert. 8. Wartungsfreundlichkeit: Einige Doppelrotor-Hammerbrecher sind so konstruiert, dass Wartung und der Austausch von Verschleißteilen erleichtert werden, wodurch Stillstandszeiten reduziert werden. Bitte beachten Sie, dass die konkreten Ausstattungen und Konstruktionsmerkmale je nach Modell und Hersteller variieren können. Bei der Auswahl oder dem Kauf eines Doppelrotor-Hammerbrechers empfiehlt es sich, die jeweiligen Herstellerspezifikationen und Bedienungsanleitungen zu beachten.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Bwedpfx Aevf E Avjahsi The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Gamybos metai: 2026, būklė: naujas, Oscillating Screen Machine Series ASM S&F oscillating and flat screens are used in various sectors of the wood processing industry (sawmills, pellet plants). Screening machines of the "ASM" series are used to screen wood chips, wood pellets, sawdust, old wood, biomass, and many other sawmill by-products in both dry and wet conditions. The gentle, horizontally circular screening motion of the inclined screen box ensures high screening precision. One advantage of this screen is that long and fibrous particles slide obliquely or tangentially across the screen surface, which, unlike with vibrating screens, prevents clogging and pinching of particles. Additional advantages include its robust design, high screening capacity, and long, low-maintenance service life. In addition to standard dimensions, the company also supplies the "ASM" series as a customized split-version solution for existing plants. This makes it possible to install new screens even in confined or hard-to-access spaces within existing facilities or sawmills. ASM series screening machines provide screening areas from 0.5 to 15 m² per deck (up to 30 m² as double-deckers) and are characterized by high screening capacity (up to 350 m³/h, depending on material). At a glance: - Ideal for: wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuels - Applications: wood industry, recycling and waste management, animal feed - Screening area: 0.5 – 15 m² (30 m² as double-decker) - Screening capacity (material dependent): up to 350 m³/h - Cut size: 0.1 – 150 mm (depending on machine size) - Drive power: 0.55 – 15.0 kW (depending on machine size) Advantages: - High screening capacity - High separation precision - No clogging or pinched particles - Low noise and maintenance - Flexible application - Custom manufacturing Need more information? Contact us—we'll be happy to advise you! Bedpfx Aoin Ey Sjahswi

Būklė: naujas, galia: 55 kW (74,78 AG), Gamybos metai: 2025, Plaktukinis smulkintuvas – tai mašina, kuri naudoja didelio greičio besisukančius plaktukus medžiagoms smulkinti ir suskaldyti į mažesnes dalis. Šie įrenginiai plačiai naudojami įvairiose pramonės šakose, tokiose kaip kasyba, cemento gamyba, statyba, metalurgija ir cheminė pramonė. Pagrindinis plaktukinio smulkintuvo veikimo principas – tai centrinis rotorius su prie jo pritvirtintais plaktukais ar peiliais, kurie sukdamiesi smūgiuoja į medžiagą, susidurdami su kietu paviršiumi ir ją ardydami. Pagrindinės standartinio plaktukinio smulkintuvo dalys ir ypatybės: 1. Rotorius: – Rotorius yra pagrindinė plaktukinio smulkintuvo dalis. Jį paprastai sudaro velenas su keliais diskais ar plaktukais. – Rotoriaus sukimosi metu plaktukai išsiskleidžia į išorę ir smūgiuoja į tiekiamą medžiagą. 2. Plaktukai: – Plaktukai – tai prie rotoriaus tvirtinamos smūginės arba traiškančiosios dalys. Jie gali būti fiksuoti arba kilnojami. – Medžiaga smulkinama, kai plaktukai ją smūgiuoja, taip sukuriama kinetinė energija. 3. Korpusas: Bwjdpfsq I Nxdsx Aahoi – Korpusas dengia rotorių ir plaktukus, užtikrina konstrukcijos stabilumą ir saugą. – Jis taip pat apsaugo nuo dulkių ir padeda nukreipti susmulkintą medžiagą į išleidimo angą. 4. Grotelių strypai arba sietas: – Įrengiami korpuso apačioje, grotelių strypai ar sietas reguliuoja išgaunamo produkto dydį – smulkesnės dalelės praeina, o stambesnės lieka papildomam smulkinimui. 5. Smūgio plokštė: – Įrengta netoli korpuso apačios, smūgio plokštė sugeria plaktukų sukurtą smūginę energiją ir apsaugo korpusą nuo intensyvaus nusidėvėjimo. 6. Pavaros sistema: – Plaktukinis smulkintuvas varomas elektros varikliu, kuris per diržą arba movą suka rotorių. – Variklis suteikia plaktukams reikiamą energiją efektyviam smulkinimui. 7. Reguliuojama išleidimo anga: – Kai kuriuose modeliuose galima reguliuoti tarpą tarp plaktukų ir smūgio plokštės, taip valdant smulkinto produkto frakcijos dydį. 8. Pritaikymo sritys: – Plaktukiniai smulkintuvai naudojami anglims, kalkakmeniui, gipso, mineralų, įvairių birių medžiagų smulkinimui. – Kasyboje dažnai taikomi žaliavų pirminiam ir antriniam smulkinimui. – Cemento pramonėje naudojami kalkakmeniui ir kitoms žaliavoms smulkinti iki jų maišymo į žaliavinį mišinį. 9. Priežiūra ir sauga: – Reguliariai būtina atlikti apžiūrą ir priežiūrą: tikrinti ir keisti nusidėvėjusius plaktukus, apžiūrėti rotorių, sutepti judančias dalis. – Dažniausiai įrengiamos saugos priemonės: prieigos durys, saugos uždangos, apsaugant operatorių darbo ir priežiūros metu. Plaktukiniai smulkintuvai – universalūs įrenginiai, gebantys efektyviai apdoroti įvairias medžiagas ir tinkantys tiek pirminiam, tiek antriniam smulkinimui. Smulkintuvo dydis ir konstrukcija parenkami individualiai, atsižvelgiant į paskirtį bei medžiagos savybes. Norint užtikrinti našumą ir saugą, būtina laikytis gamintojo rekomendacijų ir saugos reikalavimų.

Gamybos metai: 2023, būklė: naujas, Polyp scrap grab for Palfinger Hiab cranes Capacity: 300 l / 0.3 m³ Model: 4-tine – half closed Bwedpfxonzible Aahsi Gross weight: 450 kg

Būklė: naujas, Hydraulic Winch HAW3000 with Electric Valve and Radio Remote Control for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, and more—ideal for viticulture, landscaping, building construction, civil engineering, and numerous other applications. With the HAW3000 hydraulic auxiliary winch, you can simplify a wide range of tasks. Maximum rope capacity at 3,000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1,700 kg pulling force: 70 m with 6 mm wire rope. Maximum rope capacity at 3,000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2,000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1,000 kg pulling force: 220 m with 4 mm synthetic rope. Standard configuration: 30 m of 8 mm wire rope • Suitable for viticulture, agriculture, forestry, and landscaping • For construction and civil engineering projects, roadworks • Ideal for uprooting stumps and trees • Can be mounted on forestry cranes and excavators • Works as a winch for tractors, industrial machinery, and grape harvesters Rugged steel construction with triple mounting options (left, right, rear) via M12 threaded holes, allowing for flexible installation. (Threads are cut and painted. For effective rust protection, they should be cleaned before use.) Large, greaseable rope roller ensures a long service life for the wire rope. • Maximum operating pressure: 240 bar peak • Oil flow up to 125 l/min; short-term max. 150 l/min • Maximum pulling force: 3,000 kg • Rope speed: 100 m/min at 125 l/min oil flow Bwsdpofn Tu Tefx Aahsi • Weight: 95 kg • Color: Red The winch can be installed in various positions. Hydraulic brake available as an optional extra. Depending on the required pulling speed and force, we can offer tailored options. Contact us for professional advice—we are happy to assist you.

Būklė: beveik kaip naujas (naudotas), NNP Vibrationsförderer Bjdpfx Aajhpqx Hehswi Rahmen und Förderband aus Edelstahl, Förderbandmaße 2500 mm x 1150 mm, höhenverstellbarer Rahmen, 3-Phasen-Anschluss