Karšto oro pagalvių sandarinimo mašina

Saxon Heat Sealer Saxon 2

Gamybos metai: 2022, veikimo valandos: 10 h, Sąlyga: naujas, Universal Testing Machine H5TMC Mechanical Design: according to DIN EN ISO 7500-1 2 backlash-free ball screw spindles, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 test space up to nominal load: Test space width: 420 mm (optional extensions: +190mm / +330mm / +620mm) Maximum test stroke without test fixtures, adapters, and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: Conversion to floor-standing model, required additional module: base table Travel Speeds: Gedpfjiq Hw Uex Abdett Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force Measurement: Measurement range: within 0.4 - 100 % of the nominal load, Class 1 (optional Class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If a factory or DKD calibration at the installation site is required by the customer, this service must be charged separately. Crosshead Travel Measurement: Incremental square-wave input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Gamybos metai: 2024, Sąlyga: naujas, mašinos/transporto priemonės numeris: H3000-H5000TM,

Gamybos metai: 2024, Sąlyga: naujas, Universal testing machine H 5 TMNI (L) – 250mm Extended Version Mechanical structure: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free recirculating ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to rated load: Test space width: 420 mm Max. test stroke without test fixtures, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters, and KMZ: 1325 mm Travel speeds: Testing speed 0.001 – 1200 mm/min up to rated load Return speed 1200 mm/min Gtsdpfx Ajiq Hxvjbdst Force measurement: Measuring range depending on the used load cell: 0.4 – 100 % of rated load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If customer requests a factory or DAkkS calibration at the installation site, these costs must be calculated separately. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of crosshead travel measurement:

Gamybos metai: 2024, veikimo valandos: 4 h, Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address with your inquiry. Mechanical Construction: Single-spindle universal testing machine with backlash-free ball screw in C-frame design, featuring spindle guard and brushless drive motor, Fmax = 2.5 kN 1 test space up to rated load: Test space depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test space height (between lower fixed and moving crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Gsdpfx Abomdn Trsdett Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measuring range depending on the force sensor used: 0.4 - 100% of the rated load, Class 1 (optional Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site at the customer's request, this effort will be charged separately. Crosshead Travel Measurement: Incremental square signal input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent on the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber functions correctly with no technical faults. The dent is purely cosmetic and has no effect on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% RH Temperature/humidity variation: ±0.3°C / ±2.5% RH Temperature/humidity stability: ±0.5°C / ±3% RH Godjwz Er Uspfx Abdjtt Heating/Cooling Rates & Times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions (W x H x D): 1000 mm x 1000 mm x 800 mm External dimensions (W x H x D): 1410 mm x 1983 mm x 1593 mm Feedthrough with silicone stopper: 100 mm Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your security as the buyer, the following information: The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible errors!) For any further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions (W x D x H): 580 x 765 x 750 mm External Dimensions (W x D x H): 870 x 1595 x 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Gtjdsxmhycspfx Abdst Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Information for Buyers – Your Safety! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant as needed 3. Leak test with certificate 4. Upon successful inspection, chambers undergo documented test runs. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) For further questions, please feel free to contact us by phone.

Sąlyga: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Gtodpfxsxb Dm Ie Abdet Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.