Sunkiųjų pramoninių komponentų sprogdinimo patalpa

SAPI GMBH Sandstrahlanlage Großraum-Sandstrahlhalle für Industrie

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: Iijdpfxshzbipo Aausa - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Iiodpfx Aajf Sqcksuoa Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Būklė: geras (naudotas), System: REWA chamber filter press, used Type: 470-15-25K-HP Design: side bar guided Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Ijdpfx Asqakbrjaujia Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. Iisdpepugwisfx Aauea The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Gamybos metai: 2022, būklė: naujas, Load capacity: 10,000 kg Iiedpefxgp Usfx Aausa Speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Iiodod Ixadepfx Aauea Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour Iisdpfx Aasqpdkceuea - Dowel diameter capacity: 6-18 mm

Gamybos metai: 2025, būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) 58 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programmes.✳️ Isdoghf R Ujpfx Aaujia ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰►►► ✨✨Buy directly from the manufacturer for a price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technology. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder curing oven with gas or diesel heating – BOXLINE 15-3025 ✔️Internal dimensions: 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️Volume: 9 m³ ✔️ Heating output: 90,300 Kcal/h ✔️ Recirculation air flow rate (fan): 6,800 [m³/h] ✔️ Power of recirculation fan: 2.2 [kW/h] ✔️ Digital temperature control. Infinitely adjustable up to 220°C ✔️ Sandwich panels inner: 1 mm galvanized steel, outer: 1 mm powder-coated steel ✔️ Adjustable air outlets and circulation channels for homogeneous air distribution ✔️ Curing temperature, curing time, and exhaust fan function can be set ✔️ Audible alarm at the end of curing cycle ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm mineral wool and 100 mm glass fibre) ✔️ Heating method: indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The powder cures (polymerizes) at approx. 200 ºC (depending on the coating type), forming a film on the metal surface. Temperature regulation in the oven is managed by a control unit receiving feedback from a temperature sensor inside the oven. ✳️Oven Body✳️ The polymerization oven body is constructed from thermal insulation panels, installed vertically and bonded with a heat-resistant sealant. Conveyor spacing to the oven door channels can be provided upon request. Optionally, the oven can be supplied with double swing doors. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. The construction and materials allow the chamber temperature to be increased to up to 230°C, while ensuring temperature differences within permissible limits. Heat exchangers made from 3 mm, AISI310 grade stainless steel. ✳️Recirculation Fan✳️ Air circulation within the oven is achieved by four recirculation fans with insulated housing. Blade air impellers are commonly used in the recirculation fans. ✳️Digital, fully electronic temperature controller✳️ ✳️Exhaust Fan✳️ The exhaust fan serves for extracting the gases produced during powder curing inside the oven. If required, the exhaust fan can operate continuously after a set period or switch on automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️

Būklė: naujas, The Jantar is the most popular model among Eckert machines due to its dynamics and efficiency. It is used by large industrial companies as well as medium-sized enterprises seeking an economical and reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be supplemented with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, as confirmed by hundreds of customers across Europe. Main features • Attractive price for a well-equipped base version • High-dynamic and precise cutting for 2D applications, pipes, and profiles Isdpfxef Alb Ae Aaujia • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Optional extension of the working area length Technical data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working lengths: Any length from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Description to follow! Iisdjx A H Rxepfx Aauea