Ekscentrinis presas - viena kolona

SANGIACOMO T 30 CE

Būklė: naujas, Gamybos metai: 2024, Pressure 30 t Outreach 180 mm Stroke 8-76 mm Stroke rate 80-200 strokes/min Slide adjustment 60 mm Table surface 360x580 mm Table height 840 mm Nwodpfxevfhqvo Ag Hek Pass-through opening in table Ø 110 mm Ram surface 250x350 mm Bore in ram Ø 40 mm Total power requirement 3 kW Machine weight approx. 1.8 t Space requirement approx. WxDxH 1350x1200x2100 mm Machine number: 16148 LED machine lamp Frequency-controlled stroke rate Sick light barrier for safety and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safeties Machine feet Two-hand operation Foot operation Central lubrication Mechanical break plate in ram Pneumatic clutch-brake combination Approved for manual loading operations

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Engel Victory 80/45 Tech Clamping force: 45 tons, tie-barless Screw diameter: 22 mm Year of manufacture: 2004 Njdpfx Aeh Rawbeg Howk Control unit: CC 200

Gamybos metai: 2023, būklė: naujas, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Number of strokes: 80–200 strokes/min Ram adjustment: 60 mm Table surface: 360 x 580 mm Table height: 840 mm Clear passage in table: Ø 110 mm Ram surface: 250 x 350 mm Ram bore (taper hole): Ø 40 mm Total power requirement: 3 kW Nwodpfxop Uduhs Ag Hek Machine weight approx.: 1.8 t Space requirement approx. (W x D x H): 1350 x 1200 x 2100 mm Machine number: 16051 LED machine lamp Stroke frequency controlled by inverter Sick light barrier for safety and cycle operation 4x Electronically programmable cams 4x Electronically programmable tool protection features Machine feet Two-hand operation Foot pedal operation Centralized lubrication Mechanical shear plate in ram Pneumatic clutch-brake combination Approved for manual loading operations

Būklė: naujas, Gamybos metai: 2024, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Nwjdpfsvfhq Aox Ag Hek Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table size: 360 x 580 mm Table height: 840 mm Through-hole in table: Ø 110 mm Ram area: 250 x 350 mm Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (WxDxH): 1350 x 1200 x 2100 mm Machine number: 16149 LED machine lamp Stroke frequency electronically adjustable Sick light curtain for protection and cycle operation 4x freely programmable electronic cams 4x freely programmable tool protections Machine feet Two-hand operation Foot operation Central lubrication Mechanical rupture plate in ram Pneumatic clutch-brake combination Approved for manual loading/unloading operations

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, mašinos/transporto priemonės numeris: PM_1000, Used polishing machine for manual operation. Nwedpefiuguofx Ag Hek Drive power: 5.5 kW Polishing discs diameter: 1000 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) Nedpfouiy Hrex Ag Howk - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naujas, Pressure 8.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 27 kg Dimensions (L x W x H) 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke parts need to be processed with constant force. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-of-stroke cushioning on both sides • Double guide rings in the piston for smooth and steady operation • Oil-resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via one cylinder chamber—resulting in additional air savings • Working height fine adjustment is straightforward, fast, and precise in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and air savings Nwjdofv Awaopfx Ag Hek

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure Njdpeuiy Ngefx Ag Hjwk In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Nodepdr Aiopfx Ag Howk Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Minimum mold installation height: 200 mm

Gamybos metai: 2023, būklė: naujas, We are selling a new double belt grinding machine. The contact wheels are available in various dimensions. Technical specifications: Weight: approx. 350 kg Electrical connection: see nameplate of the respective drive motor Compressed air connection: 3 - 8 bar Nwodpfx Agek D Ex To Hek Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Abrasive belts: max. 120 mm x 3500 mm length Extraction connection: Ø 160 mm If you have any further questions, please feel free to contact us!