Lakštinio metalo apdirbimo centras
SALVAGNINI P4X 2516

Name: SALVAGNINI P4X 2516
Brand: SALVAGNINI
Price: 29900 EUR
Availability: InStock

Pradinė kaina

29 900 €

Gamybos metai

2008

Sąlyga

Naudotas (nepatikrintas)

Vieta

Nordrhein-Westfalen Vokietija

Lakštinio metalo apdirbimo centras SALVAGNINI P4X 2516

Stebėti aukcioną

Duomenys apie mašiną

Įrenginio aprašas:: Lakštinio metalo apdirbimo centras

Gamintojas:: SALVAGNINI

Modelis:: P4X 2516

Serijos Nr.:: 3201250

Gamybos metai:: 2008

Sąlyga:: nepatikrintas (naudotas)

Funkcionalumas:: nepatikrintas

Darbo valandos:: 32 164 h

Techniniai duomenys

Plieno lakšto storis (maks.):: 2 mm

Aliuminio lakšto storis (maks.):: 3 mm

Ruošinio ilgis (maks.):: 2 695 mm

Ruošinio plotis (maks.):: 1 524 mm

teikimas

Vieta:: Nordrhein-Westfalen, Vokietija – Atstumas: apie 1 188 km

Prieinamumas:: nedelsiant po aukciono pabaigos

Pristatymo sąlygos:: FCA

Išmontavimo ir pakrovimo išlaidos:
10 000,00 € (privaloma)

Atsiėmimas vietoje:
nemokamai

Pristatymo išlaidos:

Aprašymas

No minimum price – guaranteed sale to the highest bidder!

Bidding is binding for timely collection between 23.03.2026 and 27.03.2026!

TECHNICAL DETAILS

Max. tensile strength stainless steel: 600 N/mm²
Stainless steel sheet thicknesses: 0.5 mm – 1.25 mm
Typical stainless steel sheet thickness: 1.0 mm

Max. tensile strength steel: 410 N/mm²
Steel sheet thicknesses: 0.5 mm – 2.0 mm
Typical steel sheet thickness: 1.5 mm

Max. tensile strength aluminium: 265 N/mm²
Aluminium sheet thicknesses: 0.5 mm – 3.0 mm
Typical aluminium sheet thickness: 1.5 mm

Sheet dimensions
Length: 405 mm – 2,695 mm
Width: 190 mm – 1,524 mm
Max. diagonal: 2,800 mm
Max. centring dimension: 2,500 mm

MACHINE DETAILS

Hydraulic system
Oil volume – base machine: approx. 500 dm³
Oil volume – scissor lift table: approx. 20 dm³

Cooling system (closed)
Cooling unit R81: approx. 175 litres
Cooling unit R101: approx. 260 litres

Supply connections
Mains voltage: 400 V
Frequency: 50/60 Hz
Connection cross-section: 4 × 25 mm²
Pre-fuse: 80 A
Average current: 42 A
Power consumption: 24 kW
Control voltage: 24 V AC/DC
Industrial PC / monitor / power supplies: 220 V AC

Open cooling system
Cooling water requirement: approx. 2.0 m³/h
Max. inlet temperature: 20 °C

Compressed air
Required pressure: 6 – 12 bar
Max. air consumption at 6 bar: approx. 2,275 Nl/min

Machine tolerances
Angle accuracy: ±1°
Dimension tolerance for bent parts: ±0.2 mm
Repeat accuracy: ±0.1 mm
Centring positioning accuracy: ±0.1 mm
Straightness of bent parts: ±0.1 mm/m
Tool setup time: Automatic during loading/unloading
Length adjustment: Via bending program and in increments of 4 (5) mm

Dimensions & weight
Required footprint (L × W × H): approx. 18,000 × 11,500 × 3,500 mm
Transport width: Presumably up to 3,000 mm
Total weight (without oil fill): approx. 27,760 kg
Heaviest component (bending machine): approx. 20,040 kg

Operating hours: 32,164 h

Robot
Manufacturer: KUKA
Type: KR 150 L110-2 2000
Year: 2008
Weight: 1,285 kg
Note: Robot retrofitted to magnetic lifter

EQUIPMENT
Various spare parts in wooden crates

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Mokėjimų apdorojimas

Pirkimo papildomos išlaidos:: 18 %

Apmokėjimo sąlygos:: 100 % išankstinis apmokėjimas

Apmokėjimo būdai:: Banko pervedimas

Sąskaita išrašoma už didžiausią pasiūlytą sumą, pridėjus galimas išmontavimo/pakrovimo bei siuntimo išlaidas, taip pat papildomas pirkimo išlaidas ir įstatymu nustatytą PVM.

Pasiūlymo informacija

Sąrašo ID:: A21050882

Nuorodos Nr.:: AUC-2601175

Naujinta paskutinį kartą:: Data 2026.01.23

Išskirtinis pasiūlymas:: galima tik aukcione

Siūlyti

Stebėti

Kontaktai

Kontaktinis asmuo: Cedric Schuhmann

Mašinos ID: 21050882

+49 201 8... skelbimai

Telefonas: +49 201 857 861 77

Machineseeker pirkėjo apsauga

Saugus mokėjimas per depozitinę sąskaitą

Griežtai patikrintas pardavėjas

Asmeninė ir daugiakalbė pagalba

Pirkimo kainos išmokėjimas atliekamas tik po prekių perdavimo.

apžiūra

Galima apžiūra

Mašina įjungta į tinklą

Machineseeker iš esmės rekomenduoja apžiūrėti naudotą techniką vietoje.

Visa duomenys pateikti pagal geriausias žinias ir sąžinę – įsitikinkite vietoje.

Tiekėjas

Komercinis profesionalus pardavėjas
Nuo 2012 įmonėje Machineseeker

Baden-Württemberg Vokietija

Atstumas: apie 1 218 km

Čia galėtų stovėti jūsų įrenginys

Aukcionas su numeriu 1

Jūs parduodate vos per kelias savaites!

Jūs parduodate už aukščiausią kainą!

Jūs parduodate be pastovių išlaidų ir rizikos!

arba paskambinkite +49 201 857 861 10

Aptarti bendradarbiavimą

Straipsniai iš tos pačios vietos:

Aukcionas

Lazerio pjovimo staklės Amada LC 3015F1 NT + ASLUL 300 F1

Nordrhein-Westfalen

1 188 km

Lazerio pjovimo staklės
AmadaLC 3015F1 NT + ASLUL 300 F1

12 900 €

Aukcione

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, Gamybos metai: 2009, veikimo valandos: 69 572 h, mašinos/transporto priemonės numeris: 28510308, maks. lakšto storis: 20 mm, stalo aukštis: 940 mm, X ašies eiga: 3 270 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 100 mm, No reserve price – guaranteed sale to the highest bidder! Auction of an Amada laser cutting system + storage tower! Submitting a bid obligates the buyer to collect the items within the specified period between 23.03.2026 and 27.03.2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel range X-axis: 3,270 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 100 mm Travel range B-axis: 21 mm Cutting area X-axis: 3,070 mm Cutting area Y-axis: 1,550 mm Cutting area Z-axis: 100 mm Cutting speed X/Y: 0 – 60 m/min Rapid traverse X/Y/Z: up to 120 m/min Table height: 940 mm Workpiece weight: 920 kg Mild steel thickness: up to 20 mm Stainless steel thickness: up to 12 mm Aluminium thickness: up to 10 mm MACHINE DETAILS Control: AMNC-F Control type: Path control Controlled axes: X, Y, Z, B Simultaneously controlled axes: X, Y, Z Laser model: FANUC AF4000i-B Laser type: CO₂ laser Laser class: 4 Laser radiation: invisible Laser principle: AC-HF excited, fast axial flow Rated power: 4,000 W Max. power: 4,000 W Peak power: 5,000 W Stability: ±2 % Frequency range: 5 – 2,000 Hz Lhjdpfx Afsycqfuo Iob Pulse duty cycle: 0 – 100 % Wavelength: 10.6 µm Laser beam diameter (output): 27 mm Laser beam divergence: < 2 mrad Cooling & Supply Cooling water flow rate: > 160 l/h Power supply: 55 kVA Positioning laser Laser class: 3R Laser radiation: visible Rated power: < 5 mW Pulse duration: CW Wavelength: 0.6 – 0.7 µm Laser medium: Semiconductor or HeNe Drive type: Linear drives Cutting gas control: automatic Machine weight: approx. 11,000 kg Storage tower ASLUL 300 F1 (year of manufacture 2009) TECHNICAL DETAILS Cycle time: approx. 3 min Pallet changeover time: approx. 50 s Raw sheet / unloading pallets: 2 + 4 or 3 + 3 Pallet weight: max. 3,000 kg Sheet size: max. 3,000 × 1,500 mm Sheet size: min. 2,000 × 1,000 mm Material thicknesses Automatic mode: 0.8 – 20 mm Shuttle mode: 0.8 – 25 mm Load data Sheet weight: max. 920 kg Load on cutting pallet: max. 920 kg Stack heights Stack height raw sheet pallet: max. 150 mm Stack height unloading pallet: max. 220 mm Finished part size Finished part size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q-Series Operating interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total weight: approx. 11,000 kg EQUIPMENT Double sheet detection Note: The power supply shows an error message. It may be defective.

Peržiūrėti detales

Aukcionas

Bokštelinės perforavimo staklės AMADA EMZ-3610 NTZ + LKI MP SheetCat 3015

Nordrhein-Westfalen

1 188 km

Bokštelinės perforavimo staklės
AMADAEMZ-3610 NTZ + LKI MP SheetCat 3015

9 900 €

Aukcione

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2010, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 173, perforavimo jėga: 30 t, X ašies eiga: 2 500 mm, Y ašies eiga: 1 525 mm, X ašies padavimo greitis: 100 m/min, valdiklio modelis: AMNC-F (FANUC 180i-PB), No reserve price – guaranteed sale to the highest bidder! Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 manipulator! Bidding obligates the buyer to collect the equipment on time between 23/03/2026 and 27/03/2026! AMADA EMZ-3610 NTZ TECHNICAL DETAILS Punching force: 300 kN Turret tool capacity: 45 stations Maximum material size: 1,525 × 5,000 mm Maximum material thickness (mild steel): 4.5 mm Maximum sheet weight (F1): 50 kg Maximum sheet weight (F4): 150 kg X-axis travel: 2,500 mm Y-axis travel: 1,525 mm Feed rate X-axis: max. 100 m/min Y-axis: max. 80 m/min Strokes per minute 1 mm pitch (5 mm stroke): 780 rpm 25.4 mm pitch (5 mm stroke, X-axis): 500 rpm 25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm Max. stroke length: 37 mm Turret rotation speed: 30 rpm Positioning accuracy: 0.07 mm MACHINE DETAILS Electrical connection power: 27 kVA Compressed air requirements Base machine functions & air blow: 250 l/min POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min Operating pressure: 5 bar Control Control system: AMNC-F (FANUC 180i-PB) Controlled axes: 4 axes (X, Y, T, C) + A-axis Programming: metric or inch Dimensions & Weight Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm Height without leveling wedges: 2,317 mm Height with mirror: 3,241 mm Machine weight: approx. 24.5 t LKI MP SheetCat 3015 TECHNICAL DETAILS Max. sheet size: 3,050 × 1,525 mm Min. sheet size: 1,000 × 300 mm Sheet thickness: 0.5–6.0 mm Max. sheet weight: 300 kg Max. load per pallet: 3,000 kg Max. pallet stack height: 300 mm Max. stack table load: 4,000 kg Lodpfx Afoycqm Se Iohb Cycle time (continuous operation): approx. 37 s Max. movement speed, loading unit: 60 m/min Max. movement speed, unloading unit: 30 m/min MACHINE DETAILS PLC: Mitsubishi Q-Series Operator terminal: Beijers E1032 Dimensions & Weight Approx. dimensions: 5,775 x 3,775 x 3,100 mm Approx. weight: 4,100 kg Max. compressed air requirement: 750 l/min EQUIPMENT 2x chip bins, Bauer EXPO 150, year: 2023 34 vacuum suction pads 3 separation magnets/pallets Double sheet detection with thickness monitoring Note: The control parameters are missing.

Peržiūrėti detales

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Lakštinio metalo apdirbimo centras Salvagnini Line MD1.30+S4.30X-e+P4L2516 2020MFY

San Vito

1 405 km

Lakštinio metalo apdirbimo centras
SalvagniniLine MD1.30+S4.30X-e+P4L2516 2020MFY

1 250 000 €

EXW fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 5 000 h, Funkcionalumas: visiškai funkcionalus, plieno lakšto storis (maks.): 3 mm, aliuminio lakšto storis (maks.): 4 mm, Linea Salvagnini in condizioni perfette Ledev Icmqjpfx Af Iohb Configurazione: magazzino MD1.30 + punzonatrice S4.30xe + dispositivo di scarico IA3015 + piegapannelli manuale ACN per carico pannelli, + dispositivo di ribaltamento RIP + piegapannelli P4L 2516 (piegatura 2,5 m) + dispositivo di scarico SAP

Peržiūrėti detales

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.