Hidraulinės giljotinos žirklėsSafan
M-Shear

Duomenys apie mašiną
- Įrenginio aprašas:
- Hidraulinės giljotinos žirklės
- Gamintojas:
- Safan
- Modelis:
- M-Shear
- Gamybos metai:
- 2007
- Sąlyga:
- paruoštas naudoti (naudotas)
- funkcionalumas:
- visiškai funkcionalus
Techniniai duomenys
- Darbinis plotis:
- 3 100 mm
- Pjovimo kampas (min.):
- 0,5 °
- Pjovimo kampas (maks.):
- 3 °
- Plieno lakšto storis (maks.):
- 13 mm
- Aliuminio lakšto storis (maks.):
- 16 mm
- Atramdų greitis R ašis:
- 50 mm/s
teikimas
- Vieta:
- Woiwodschaft Schlesien, Lenkija
– Atstumas: apie 632 km
- Prieinamumas:
- nedelsiant po aukciono pabaigos
- Pristatymo sąlygos:
- FCA
1 000,00 € (privaloma)
nemokamai
Aprašymas
TECHNICAL DETAILS
Sheet thickness steel (max.): 13 mm
Sheet thickness aluminium (max.): 16 mm
Cutting length (max.): 3,100 mm
Cutting angle: 0.5° - 3°
Thickness of cut sheet (450 N/mm²): 1 - 13 mm
Backgauge speed R-axis: 150 mm/s
Backgauge travel Z-axis: 1,000 mm
Front support arm length (from knife): 1,500 mm
Rear buffer speed: 125 mm/s
Number of cuts at full length: 18/min
Number of cuts at minimum length: 46/min
Min. cutting clearance: 0.04 mm
Max. cutting clearance: 0.5 mm
Positioning accuracy: +/-0.03 mm
MACHINE DETAILS
Type of input current: Three-phase current
Main power supply: 3/N/PE - 50Hz - 400/230V
Motor power: 30 kW
Total weight: 12,500 kg
Overall length: 4,000 mm
Overall width: 4,500 mm
Overall height: 2,000 mm
EQUIPMENT
- Documentation/manual
- Finger guard
- Safety light barrier
DESCRIPTION
The SafanDarley guillotine shears are equipped with unique technology. The control of the hydraulics is monitored by electronics during the cutting process. The amount of power consumed by this type of solution is calculated based on the thickness
of the material to be cut.
The backlash-free ball screw plunger allows positioning accuracy of +/-0.03 mm, while the minimum clearance of 0.04 mm enables quality cuts even on material thicknesses from 0.5 mm up to the machine’s maximum capacity. The design of the worktable enables straight cutting even under heavy load.
Automatic selection of the clearance and cutting angle according to the type and thickness of the materia
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Mokėjimų apdorojimas
- pirkimo papildomos išlaidos:
- 18 %
- Apmokėjimo sąlygos:
- 100 % išankstinis apmokėjimas
- Apmokėjimo būdai:
banko pervedimas
Pasiūlymo informacija
- Sąrašo ID:
- A19892890
- Nuorodos Nr.:
- AUC-2508159
- Naujinta paskutinį kartą:
- Data 2025.09.02
- Išskirtinis pasiūlymas:
- galima tik aukcione
apžiūra

SafanHT (M Shear) 310 4
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.