Briketavimo presas

RSN Eco 5,5

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable Pedpovnv Uzjfx Afwegw 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Equivalent to Weima C 150 Year of manufacture: 2019 1845 operating hours Features and technical data: Podpfx Afjw Rhk Dswogw Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection data: 400 V +/- 5% / 50 Hz Included: - Press mechanism with filling cylinder, main cylinder, clamping cylinder - Connection part for transport pipe - Chrome-plated clamp - Hydraulic tank 160 l with pump motor + valve control - Safety switch for oil temperature - Control cabinet and electrical control system - Briquette length monitoring - Automatic end position for all cylinders - Manual control - Automatic "On/Off" with level sensor switch Material: planer shavings, sawdust from solid wood, loose, clean, and free from foreign substances * Dimensions: max. 10 mm * Throughput: approx. 50 m³/year/ * Specification for foreign substances: Anything other than wood, wood pieces larger than 15 mm. Throughput capacity is highly dependent on material type. The stated values are averages. Actual performance may vary depending on blend ratio, moisture, and material characteristics! Application case not or not fully known/indicated. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure sufficient ventilation for the press/unit/oil cooler. In the case of heat accumulation, runtime may be drastically reduced depending on temperature rise. Supplied with new press clamp. Availability: by arrangement Stock location: Flörsheim