Įrankių laikiklis

ROSENBOOM Werkzeugwagen

Sąlyga: naujas, Gamybos metai: 2024, Number of tools: 36 pcs Ljdpfx Aocdq H Hjd Ejhp Dimensions (L x W x H): 0.72 x 0.56 x 0.95 m Weight: 27 kg New mobile tool trolley for tool holders with 40 taper or optionally with inserts for VDI 40 turning tools. Each of the six rows is removable. The trolley is delivered packaged and without tool holders. Color deviations are possible.

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration metal band saw with base, quick-release device, and coolant system. Cutting capacity: Round / Rectangular / Flat 90°: 220 / 220x220 / 250x155 mm Round / Rectangular / Flat 45°: 160 / 160x160 / 160x100 mm Round / Rectangular / Flat 30°: 100 / 100x100 / 100x85 mm Lhsdpfepgmkyox Ad Esp Cutting speed: 32 / 66 m/min For further technical data, please refer to the PDF document. Technical data and dimensions are subject to change and errors excepted.

Sąlyga: naudotas, Gamybos metai: 2001, Technical data: Tool holder: SK 40 Travel distances: Ledpfjt Hr Ahex Ad Eehp X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Sąlyga: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Lhjdpfxog S Ui Ae Ad Esp Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, centro aukštis: 100 mm, šlifavimo disko skersmuo: 350 mm, ruošinio svoris tarp centrų: 20 000 g, atstumas tarp centrų: 400 mm, įvesties srovės tipas: trifazis, šlifavimo ratuko plotis: 30 mm, veleno greitis (maks.): 1 200 aps./min, veleno greitis (min.): 30 aps./min, padavimo ilgis Z ašis: 420 mm, šlifavimo veleno variklio galia: 3 000 W, bendras svoris: 1 600 kg, paskutinio kapitalinio remonto metai: 2025, įėjimo įtampa: 400 V, Cilindrinis šlifuoklis STUDER S 20 Favorit TECHNINĖS CHARAKTERISTIKOS: Pagaminimo metai: 1997 Atstumas tarp centrų: 400 mm Centrų aukštis: 100 mm Z ašies eiga: 420 mm Darbinis padavimo greitis Z ašyje: 100 – 3500 mm/min Stalo pasukimo kampas: 0 – 30° Šlifavimo veleno variklio galia: 3 kW Didžiausias šlifavimo disko skersmuo: 350 mm Didžiausias šlifavimo disko plotis: 30 mm Šlifavimo disko tvirtinimo skersmuo: 127 mm Ruoinio veleno galas: W20 Ruoinio veleno min. greitis: 30 aps./min Ruoinio veleno maks. greitis: 1200 aps./min Maks. detalės masė laikiklyje tarp centrų: 20 kg Ruoinio pasukimo diapazonas: 0° / +90° Ruoinio veleno galia: 0,5 kW Uždėjimo centras: MT2 Galvutės sustūmos eiga: 20 mm Maitinimo įtampa: 400 V Bendras reikalingas galingumas: 8 kVA Lodpewt Tgwsfx Ad Eohp Staklių matmenys: 2350 x 1480 mm Svoris: 1600 kg KOMPLEKTACIJOJE: x1 popierinės juostos filtravimo įrenginys x1 SONY LH 31A dviejų ašių skaitmeninė padėties rodymo sistema x1 WALDMANN LED lempa x1 vidinio šlifavimo velenuas tipas 82060B, greičiai: 11 900–28 400 aps./min x1 SENSITRON kontaktinis indikatorius x1 šlifavimo disko balansavimo įrenginys x1 šlifavimo disko balansavimo velenas x1 trijų žandų griebtuvas FN Ø100 mm MT3 x1 magnetinis griebtuvas Ø160 mm MT3 x1 stalas su disko apdorojimo įtaisu x37 W20 griebtuvai x2 pusiniai centrai x2 pilni centrai x1 bukas centras x1 skriemulys Ø105 mm vidinio šlifavimo velenui x2 išorinio šlifavimo diskų flanšai x1 TYROLIT 494271 šlifavimo diskas išoriniam šlifavimui Įvairūs vidiniai šlifavimo diskai x4 ruoinių laikikliai Įvairūs kiti priedai Staklės įjungtos demonstruojamos mūsų patalpose tik iš anksto susitarus. Kaina pagal užklausimą, krovimas į transporto priemonę įskaičiuotas. Galimas pristatymas visame pasaulyje. Šio puslapio informacija pateikta geriausiomis mūsų žiniomis, tačiau jos tikslumas negarantuojamas. Panašūs įrenginiai: Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Vidinis ir išorinis šlifavimas (ID/OD). Taip pat galite domėtis paviršiaus šlifuokliu, tekinimo staklėmis, apdirbimo centru, frezavimo staklėmis.

Sąlyga: naudotas, Gamybos metai: 1959, Swing diameter over bed: 380 mm Swing diameter over slide: 215 mm Turning length: 1000 mm Machine weight approx. 1800 kg Space requirement approx. 2.7 x 1.2 x 1 m The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: Lhjdpfx Ajvwgmaed Eep - 3-jaw chuck - 4-jaw face plate - Steady rest

Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS320 – Double-sided Miter Bandsaw for Angles from -45° to +60° The design of this machine is based on solutions and projects developed by Polish engineers. Its precision and manufacturing quality place it at the forefront of bandsaws capable of cutting widths up to 320 mm. A key advantage is the latest generation hydraulic cylinder. The machine features a reinforced vise base and a quick-release vise. Lhedpfsi D Dgwjx Ad Eep Machine Features The CORMAK HBS320 metal bandsaw allows angle cutting in the range from -45° to +60°. The workpiece can be fed manually or using an automatic feeder. Downfeed during cutting is gravity-based, utilizing oil flow control in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. Upon completion of the cycle, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it enables high-volume cutting of structural, stainless, and tool steels. The vise is mounted on an adjustable bed and fitted with a quick-release clamping system. The blade guides feature rolling bearings and carbide inserts, ensuring excellent cutting precision and straightness. This significantly improves blade guidance, longevity, accuracy, and cut quality, while the carbide guides greatly reduce wear on both the machine and the blade. The base is constructed as a rigid, welded steel body housing a separate coolant tank with an electric pump. The upper part of the base forms a tray for coolant drainage and chip collection during the cutting process. The base supports a cast iron worktable with a double-swivel arm and a control panel. Feed rate is regulated from the bandsaw’s control panel. Two blade speeds are available: 44 and 88 m/min. When the arm reaches its lower position after the cut, the blade drive is switched off automatically. Safety is ensured by blade guards and micro-switches that stop the motor when the cutting cycle ends or any guard is opened. Additional protection is provided by automatic shut-off in case the blade breaks. Technical Specifications Ø MAX – 260 mm (perpendicular cut) H x W MAX – 320 x 160 mm (perpendicular cut) POWER SUPPLY – 3-phase 400V TOTAL POWER – 2.1 kW ARM DOWNFEED CONTROL – hydraulic cylinder BLADE DIMENSIONS – 2740 x 27 x 0.9 mm CUTTING SPEED – infinitely adjustable 0–50 m/min BLADE SPEED – 44 / 88 m/min VISE BASE HEIGHT – 920 mm DIMENSIONS – 1400 x 880 x 1550 mm WEIGHT – 330 kg Cutting Capacity Angle 0º —— ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 The price quoted is NET (excluding VAT). Transport costs are not included. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm Lhsdpjt R T Hcsfx Ad Esp - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: Turning diameter: 38 mm Item: CNC lathe Manufacturer: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z1 travel 320 mm; synchronized guide bushing unit; guide bushing type JBS or SL38; collet type 173E / F48 Sub spindle: Max. pickup diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z2 travel 320 mm; collet type 171E / F42 Tool turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Lsdpfjtv Sdfex Ad Eohp Please contact us for further information and pictures via email (at) or

Sąlyga: geras (naudotas), 16 external turning tool holders 41 internal turning tool holders Lhodpsikn E Hofx Ad Ejp