Miltelinė įranga

ROMER Powder Coating Booth KPP

Būklė: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Iedpfxjh Ayyqj Agfjtd Complete line: 11.5 m Technical information subject to change/errors excepted

Būklė: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Itodpfxsf Ncadj Agfod Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table

Būklė: naujas, Gamybos metai: 2025, Output: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Itodpfx Agspfatpofsd Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 158 h, rankos pasiekiamumas: 1 300 mm, Sveiki, Isdpfx Agjp E T N Aefjtd parduodame demonstracinį UR10e robotą, kuris buvo naudotas koncepciniam tyrimui, tačiau vėliau šio tyrimo atsisakyta.

Būklė: labai geros būklės (naudotas), Katalogo numeris 6726 TECHNINIAI DUOMENYS - Pakrovimo bunkerio įvadas: 280x300 mm - Susmulkintos medienos išvadas: Ø 310 mm - Rotoriaus darbinis plotis: 340 mm - Pagrindinis variklis: 22 kW - Peilių kiekis: 6 vnt. Itsdpeignt Usfx Agfod - Matmenys (I/P/A): 1300x1150x1680 mm - Svoris: 720 kg PRIVALUMAI – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 19 900 PLN Grynoji kaina: 4 740 EUR Kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams kaina gali keistis)

Būklė: visiškai atnaujintas (naudotas), Edwards GV250 after complete overhaul: - in absolutely as-new condition - inspected according to manufacturer specifications, all clearances and dimensions within tolerances - fitted with new wear parts - available at short notice - includes one-year warranty Itedpefq Rgiefx Agfod

Būklė: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I Itedpfx Ajd Iipmegfjd - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Iedpfxsfg Rlce Agfjtd Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, rankos pasiekiamumas: 1 300 mm, Tobulas paketas jūsų suvirinimo automatizacijai su naujausios kartos UR10e robotų serija – nebeįsigykite CB serijos! Itodpfx Aot S U Ausgfed Norite automatizuoti savo suvirinimo darbus naudojant kobotą, kad įveiktumėte būsimus iššūkius? Tuomet OH-au2mate Cobot Welding Solutions su Lorch maitinimo šaltiniu yra kaip tik jums! Idealus suderintas paketas apjungia: - aukštos kokybės robotų technologiją iš kobotų rinkos lyderio Universal - inovatyvią suvirinimo technologiją iš Lorch - intuityvią valdymo programinę įrangą Tiksli rinkinio sudėtis: suvirinimui paruoštas UR10e robotas, valdymo elementai, degiklio laikiklis, Translas 8XR ištraukiamasis degiklis, Lorch S5 400A maitinimo šaltinis.

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: Ijdpfx Agjnh R Ekefetd • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location