Skiedrų ištraukimo ventiliatoriaus 30 kW garso izoliacija

Rippert S80-750/630/1-Aex

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Nwsdeh A Sfdopfx Ad Ujp Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Gamybos metai: 2024, Sąlyga: naujas, The JC 500 jaw crusher is ideally suited for crushing hard, brittle, and tough samples such as ceramics, clinker, coke, construction materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slags, and many more. Nwodeiamq Hjpfx Ad Uep

Gamybos metai: 2012, Sąlyga: naudotas, kuro tipas: elektrinis, Load capacity in kg: 2500 kg Lift height: 3700 mm Fork length: 900 mm Nwsdpfxjfibh Ro Ad Uep Tyre type: Super elastic Battery year: 2013 Overall height: 2630 mm Machine weight approx.: t Compact forklift truck Duplex mast / Full free lift

Sąlyga: labai geros būklės (naudotas), Kaeser Omega 83 P pūstuvo blokas, atnaujintas, 12 mėn. garantija, HB 1300 Nwedjncd Apopfx Ad Uep

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Fully Automatic Finger Jointing Line: Type Doppel-Pack with Automatic Feeding with Multiple Cross-Cut Saw with Stacking Unit Specification: Wood Infeed Length: min. 150 mm max. 1000 mm average 400 mm Wood Cross-Section: min. 20 x 40 mm max. 80 x 180 mm Wood Outfeed Length: 6030 mm Max. Wood Cross-Section with 10 mm Finger Length: Hardwood 120 cm² Softwood 150 cm² Finger Joint configuration: vertical and horizontal Type of Glue: PVAC white glue, double-sided glue application Electrical Power: Connection Voltage: 400 V Control Voltage: 24 V 50 Hz System completely wired up to the control cabinet. Finger length, possible wood cross-section, and glue type can still be adapted. Performance: 6 milling tables/min Working Height: 960 mm Nedpfx Adeg D Ugks Ujwp Table Width: 600 mm Glue Application: double-sided application Technical Parameters: Input Material: Input Length of Parts (min. - max.): 150-1000 mm Part Width (min. - max.): 40-155 mm Part Thickness (min. - max.): 20-80 mm Working Height: 960 mm Bundle Width: 600 mm Glue Application: double-sided application

Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Double-shaft trim saw, manufacturer Link, type CSMK 285 A1 B1 with spray system. Saw head clamping length: 4 x 125 mm Nwedpfxowww Iys Ad Uep Weight: 17,500 kg Outfeed device: Av 21 CSMA 540 Outfeed: SE separator conveyor Drive power: 4 x 132 kW Feed speed: up to 150 m/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Single Screw Extruder Battenfeld BEX 1-75-30:B with Co-Extruder BEX 1-35-30:B Application: PE, PP Year of manufacture: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW RPM: 2,450 Combined throughput: approx. 850 kg/h The extruder was retrofitted by Battenfeld in 2014 to a frequency-controlled drive, featuring a new three-phase motor (brushless) and frequency inverter. Gearbox was overhauled in July 2024 Condition: The extruder is in very good condition Last application: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Throughput: approx. 110 kg/h Year of manufacture: 2010 Njdpsug Edkofx Ad Uswp Condition: The extruder is in very good condition The extruder is my property. Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Gamybos metai: 2013, veikimo valandos: 1 300 h, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Skid-like, but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) Nodpfxjg Tm N Aj Ad Ujwp - Motor: Electric, 30 kW - 1,250 l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift pockets and crane lugs - Dimensions with 1,250 l water tank: approx. 1,100 x 1,760 x 1,770 mm - Unladen weight: 1,085 kg - Year of manufacture: 2013 - Operating hours: approx. 1,500 h Condition: High-pressure pump overhauled 06/2022. In very good used condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, A stainless steel filter unit with compressed air cleaning, in very good condition. Filter surface area: 50 m². Material: V4A (1.4571) 316TI Nedofg Iphjpfx Ad Ujwp Installed stainless steel radial fan Drive power: 22kW Airflow: 6,700 m³/h Pressure: 8,000 Pa Compressed air valves: ASCO 24 Volt Number of filter bags: 48 Filter medium: no longer present Insulated: Yes With differential pressure measurement Dimensions L/W/H: 3000mm / 1700mm / 2100mm (up to outlet) The filter consists of 2 modules, divided centrally. Also available: Stainless steel cooling screw conveyor Ø400mm; length 4100mm

Sąlyga: paruoštas naudoti (naudotas), Two compressors are available: Nsdetnf Iuspfx Ad Uewp 1) CSC ab 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5 kW, max. operating pressure: 10 bar, FAD capacity: 13 l/s, 46.8 m³/hr, 27.5 cfm, noise level: 65 dB(A), standard air receiver size: 200 l. Dimensions (L/W/H): approx. 1430 mm / 665 mm / 1260 mm, weight: 210 kg. Documentation available.