Sraigtinis kompresorius

Renner RSDK-B 3,0 - 10 bar

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat: 275 mm Drill stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table travel (cross): 190 mm Table travel (longitudinal): 490 mm Table clamping surface: 730 x 210 mm Connection voltage: 400 V Drilling feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Nsdpjupw T Djfx Af Ijkt Drilling/milling machine with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Gearbox

Sąlyga: beveik kaip naujas (naudotas), Įranga: Tipinė plokštelė prieinama, Used stainless steel agitator tank on stainless steel pallet with castors and propeller agitator Type: SBPA1000RWP Item number: 10862 Capacity: 907L Type: Vertical design on stainless steel transport pallet with castors Design: Single-walled, min. 2mm wall thickness Contact material: 1.4301 stainless steel Surface: Exterior satin finish, interior BA (IIId) Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central traverse with two hinged lid halves Bottom: Dished end with outflow groove Tank dimensions: Tank diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Nkodpfx Aov Ha Uief Ijt Distance from outlet to floor: 400mm Leg height: 240mm Equipment: 1x Hinged lid, central traverse with two hinged lid halves, stainless steel grilles below the hinged lid as reach-in protection (removable), latching function (lids can be latched in open position) 1x Spare nozzle DN50 DIN11851 on the top 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, seal PTFE 1x Stainless steel transport pallet 4x Swivel castors, 2x with brake 1x Nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 RPM Operating voltage: 3PH 400V -Robust agitator shaft fixed to the agitator motor, non-removable -Agitator shaft dynamically balanced for concentric running in the speed range -1 mixing propeller Ø 150mm screwed to the end of the agitator shaft. Mixing propeller made of cast stainless steel, high-gloss polished -4x neoprene elastomer-metal buffers, vibration-damped motor mounting, hardness grade 70 Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the tank, On/Off switch, Emergency stop, no-voltage release, and phase reverser Stepless speed control of the agitator motor via a compact, external frequency converter, brand Optidrive. With digital display for frequency or speed. Including potentiometer, On/Off switch. Preprogrammed for agitator operation. Operating voltage 3PH 400V Mounted on the tank with a stainless steel bracket.

Sąlyga: naujas, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. The tool trolley is fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Each drawer can be individually locked. All drawers are equipped with quick-release catches and damping. Height-adjustable storage compartment behind the door. Central locking system with 2 keys. The tool trolley is equipped with 155 pcs. of tool parts: 3 socket sets: 1/4", 3/8", 1/2". Ratchet ring spanner set from 6 to 22 mm, Socket set extensions, various Allen keys from 1 to 10 mm, Nsdou Imk Rjpfx Af Ijkt Various screwdriver sets. Assorted pliers.

Sąlyga: naujas, Welding current: 15 - 40 A Cutting capacity: 1 - 16 mm Nodpfsupxfhex Af Ijkt Open-circuit voltage: 96 V Compressed air connection: min. 4 bar Power input: 3.6 kW Input voltage: 230 V Weight: 9.0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Digital display. Overvoltage protection. Plasma torch. Ground cable. Pressure regulator with moisture separator. Equipped with IGBT technology.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 125 mm Cutting capacity at 90 degrees: square 125 mm Cutting capacity at 90 degrees: rectangular 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. Nsdpfx Afjupw R Ne Iekt With this metal band saw, you work not only precisely but also quickly: The blade speed is adjustable between 38 and 80 metres per minute. With a weight of just 25 kilograms, the saw is easily portable.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 5 780 h, Funkcionalumas: visiškai funkcionalus, galia: 7,5 kW (10,20 AG), darbinis slėgis: 11 juosta, aplinkos temperatūra (min.): 3 °C, aplinkos temperatūra (maks.): 45 °C, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, šaldymo sausintuvas, Kaeser Complete Compressed Air System - SM 13 + TA 8 + OKS (Otto Klein) For sale is a complete, fully functional compressed air system consisting of: 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit is already equipped with an internal tank as well as an integrated cooler. Additionally, a separate cooler and compressed air receiver, as shown in the pictures, are included. Thus, both the internal configuration and the additional accessories are part of the delivery scope. The system has been serviced regularly, is in excellent, operational condition and is ready for immediate use. Nodpfx Asxwbdvof Iokt Our Service Commitment: With us, quality, expertise, and customer satisfaction are top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We attach great importance to personal support and are happy to assist you even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Sąlyga: naujas, Drilling capacity in steel (diameter): 30 mm Throat depth: 250 mm Drilling stroke: 130 mm Spindle taper: MT 3 MK Table size: 380 x 380 mm Column diameter: 98 mm Speed range: 75 - 3200 rpm Njdpfsu Imc Hox Af Iskt Feeds: mm/rev Total power requirement: 1.1 kW Machine weight approx.: 220 kg Dimensions (L x W x H): 0.5 x 0.6 x 2.05 m Gear-driven drilling machine Tapping device Left / right rotation Tilting worktable Lighting 2 electronic speed settings Depth stop Gears run in oil bath Packaging dimensions: 2100 x 400 x 710 mm Weight: 260 kg

Sąlyga: naudotas, Gamybos metai: 2005, Cutting diameter: 178 mm Saw band length: 2,265 mm Njdpfx Aorzwwrof Ijkt Cutting width: 225 mm Saw band dimensions: 2,265 x 20 x 0.9 mm Band speed: 30 / 60 m/min Cutting range at 90 degrees (round): 178 mm Cutting range at 90 degrees (flat): 225 x 110 mm Cutting range at 45 degrees (round): 140 mm Cutting range at 60 degrees (round): 85 mm Total connected load: 0.75 kW Machine weight: approx. 165 kg Space requirements: approx. 1,100 x 700 x 1,650 mm Equipment: - Coolant system - Bandsaw blades

Gamybos metai: 2021, Sąlyga: naujas, For sale: a workshop crane. Nkodpohygn Iefx Af Ijt The crane is brand new and unused. Premium Workshop Crane 2051510WKG10 Design: splayed legs Maximum lifting capacity in position A1: 1,000 kg Lifting height per pump stroke with/without load: 6/20 mm Weight: 130 kg

Sąlyga: naujas, Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: square 127 x 127 mm Saw band dimensions: 1140 x 13 x 0.65 mm Band speed max.: 144 m/min Total power requirement: 1.1 kW Machine weight approx.: 15 kg Dimensions (L x W x H): 500 x 300 x 400 mm Nksdpfx Asupw N Eof Iot Portable and detachable metal band saw Features: High-performance with 1,100 watts. Includes 2 saw bands, work table, and integrated LED lighting. With adjustable, variable handle. Lightweight and easy to handle. Suitable for universal applications in the workshop, on the construction site, or for private use.