Kietumo matavimo prietaisas, kietumomatis

Reicherter Briro VA I

Gamybos metai: 1982, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1.001.001-052, Type of force application: Spring force loading Preload: 98 kN Throat depth: 150 mm Test height: 250 mm Test forces: 588 N, 613 N, 980 N, 1471 N, 2450 N Voltage: 220 V Current type: 50 Hz Accessories and special equipment: Guedpel Axb Tefx Abmek - Holder with 120° diamond cone - Hardened test plate HRC - Holder with 2.5 mm carbide ball - Hardened test plate HR 2.5/187.5 - Test table, 190 mm diameter - Prismatic test table for max. 85 mm diameter - Protective cover - Machine table with drawer Required space: 460 x 210 x 840 mm Weight: approx. 100 kg

Sąlyga: naudotas, Gamybos metai: 2015, Technical details: X-travel: 960 mm Gusdsrm Txbepfx Abmjk Y-travel: 600 mm Z-travel: 480 mm Rotary table: Ø 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle drive power: 14/10 kW Control: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Space required approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table Ø 350 mm, A-axis (+120°/-42°), C-axis 360°, Internal coolant supply (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Counter readings: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Gamybos metai: 2023, Sąlyga: naujas, - Modern ergonomic design Gedopbbc Hepfx Abmouk - Manual testing sequence with analog gauge (reading accuracy 0.2 HR units) - Easy operation and rapid testing procedure - Test space height approx. 185 mm - Test space depth approx. 160 mm - Dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - V-block support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - Spindle guard - Accessory case

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Guodpfx Aboia Rtdsmok Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or

Sąlyga: naujas, Gamybos metai: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a rising processing container floor with integrated separation. It is equipped with an easily interchangeable screening unit and delivers high process efficiency thanks to its integrated drop-off step. Emptying and separation are performed via the integrated flap (manual/pneumatic). Upon request, reinforced suspension and a more powerful motor can be fitted for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The EVP-RA 550 can be linked to other machines via its lateral discharge. The system can be equipped with a fully automatic PLC control system (optional). Gusdpfx Asn Ut Uvjbmek ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the processing container. Technical Data: - Gross volume: 550 l - Channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The equipment shown in the images may include accessories available as optional extras for an additional charge. If you are interested, we look forward to hearing from you. We are happy to provide consultation—without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). As the first step, we will send you a non-binding quote, which will include our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase or contract is concluded.

Sąlyga: naujas, Gamybos metai: 2025, The EVP-RA 350 vibratory finishing machine from ERBA features a rising processing bowl floor with integrated parts/media separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the integrated drop-off step. Discharge and separation are performed via the integrated flap (manual or pneumatic actuation). Upon request, the machine can be fitted with reinforced suspension and a higher-performance motor for heavier loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines thanks to its lateral discharge system. The machine is also available with a fully-automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, which is largely attributed to the hot-cast polyurethane lining inside the processing bowl. Technical data: - Gross volume: 385 L - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are available separately at additional cost. If you are interested, we look forward to hearing from you. We would be pleased to advise you in a non-binding manner. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Gjdpfx Abjn Ut Ursmjuk This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). Initially, you will receive a non-binding offer, which also includes information on our general terms and conditions, imprint, and cancellation policy, before any purchase or contract is concluded.

Sąlyga: naujas, Gamybos metai: 2024, Hacker blades 40 x 40 concave Gsdpfx Abjbxu Dhsmeuk Blades for Weima, Gross ... Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Sąlyga: labai geros būklės (naudotas), Perfekt erhaltene sechsspindlige INDEX MS 25 Mehrspindel-Drehautomat mit sechs Quer- und sechs Längswerkzeugführungen. Der Preis ist verhandelbar und abhängig von der gewählten Zusatzausstattung: Spannzangen, Werkzeugen, Späneförderer usw. Gujdpfx Asqhkukobmjk Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Sąlyga: naujas, Gamybos metai: 2025, The ERBA EVP-RA 550 vibratory finishing machine features a flat process bowl base with integrated separation, specifically designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out via the integrated flap (manual/pneumatic operation). For increased load capacities, reinforced suspension and a more powerful motor can be installed upon request. The motor speed can be continuously adjusted using a frequency converter (optional). The EVP-A 550 can be linked with other machines due to its side discharge configuration. The system can be equipped with fully automated PLC control (optional). ERBA vibratory finishing systems are characterized by their durability and longevity, supported by the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 550 L - Process channel width: 390 mm - Imbalance motor output: 4.0 kW - Rotational speed: 1,400 rpm - Inner diameter of the bowl: 1,400 mm All prices are net, subject to the statutory VAT applicable at the time of purchase, and plus shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. Our consultation is non-binding and at your disposal. Gujdpfx Aon Ut Ugjbmjk The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). Our initial offer is non-binding and will include our general terms and conditions with company information and cancellation policy before any purchase/contract conclusion takes place.

Sąlyga: geras (naudotas), Gamybos metai: 1999, Offered for sale is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control. The machine is already dismantled and ready for loading. Godpfx Abskr E Nnomsuk Manufacturer: CHIRON - Werke 78532 Tuttlingen Type: FZ 22 S high speed Machine no.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2355 h Year of manufacture: 1999 Weight: 6500 kg Inspection report from 2021 available X-axis travel: 750 mm Y-axis travel: 520 mm Z-axis travel: 630 mm Spindle taper: SK 40 CNC control: Siemens SINUMERIK 840D Table size: 1150 x 570 mm Max. table load: 1200 kg Tool changer: 20 positions Coolant system Operating voltage: 400 V Total power requirement: 32 kVA Space requirements (W x L x H): approx. 2.00 x 3.80 x 3.0 m The price is net, plus statutory VAT, ex works, loaded free on truck.